5x LOCKWASHER WASHERS AND NUTS FOR SWITCHCRAFT AMERICAN JACKS POTENTIOMETERS

5-way selector made by the Electroswitch company in the United States, famous for its high resistance to use, almost 0% noise and its ease to solder the cables in it. This brand of selector has been around since the early days of the electric guitar and is the best you can find on the market today.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.

180pF (picofarad) is used on the volume control on PRS guitars, to retain high frequencies and clarity as the volume is turned down (180 picofarad = 0.00018 microfarad). High quality. 100% Made in the USA.

PACK OF 12.

Original Switchcraft brand switch (short size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported. Included is the original Switchcraft ivory or cream hood or hood.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

8 X 1-3 / 4 in. PHILLIPS OVAL SMSA NICKEL. These screws are used to secure a bolt on neck to a body. This is the standard length used by Fender ® and it should work for most guitars of comparable construction.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.

If you hate that external noises such as power supplies, televisions, fluorescents, radio broadcasts etc ... make your guitar or bass sound terrible and engage annoying sounds, Electrónica Baile offers you the most practical solution to avoid those unwanted noises especially when you play with distortion.

Super kit for Fender Stratocaster guitars with the highest quality on the market! All the components in this kit are made in the United States with the best materials to give it the highest quality, sound, a very long useful life and low noise.

5 original Switchcraft brand nuts to use on various models of their jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric although the pressure washers (Lockwasher) would be missing.

Authentic and genuine Switchcraft brand model #12B jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Pack of three meters of cable (one meter of each color) to use in all Gibson and Epiphone brand Epiphone ! Made in America since the 1950s!

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with single coils of any guitar brand but especially the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.

Measures:

3.7cm X 1.7 cm

Excellent quality single-core cables with 1 meter BROWN and 1 meter RED color cotton coating type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Generic but high quality button for CRL, OAK Gigsby or American made position switches. It is used for Fender Stratocaster guitars and the like.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Authentic and genuine Switchcraft brand jack model # L11 (jack is slightly longer than model # 11!). Great for use on your Fender guitar or stomp box, although it can be used on amps without any problems. Very hard and resistant and with a quality proven for many years.

Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.

Manufacturer: ALPHA
Manufacturer Part No: B300K

Specifications
Adjustment Type: Top Adjustment
Power: 1 / 2W
Resistance: 300K OHM
Type: Linear
Features
Knurled Shaft
Type B
Suits Most Standard knobs
Shaft Diameter: 6mm
Shaft Length: 10mm
Mounting Hole: 7.5mm
Base Diameter: 16mm

Ideal for guitars with holes too narrow or shallow!

Potentiometer for controlling the volume or tone of active pickups, or for use after the preamp of a piezo-saddle electric guitar bridge. Made by CTS .

Pickup selector trim for black Fender Telecascaster guitars. They are brand new and unused.

Potentiometer of the Alpha brand special mini version for those electroacoustic guitars that have a preamp or for use in amplifiers or effects pedals. This brand has been supplying major guitar manufacturers such as Fender , Gibson , Ibanez and many others for many years for their guitars made outside the United States.

OAK 6 way switch for Fender Stratocaster.

PLEASE NOTE: While this switch uses the same mounting hole locations as a standard 5 way switch used on a USA Fender Stratocaster the switch slot will need to be lengthened equally on either end in order for the longer throw of the switch to engage the outer positions .

Potentiometer Bourns B300K Linear for Jimmy Page Gibson SG Double Nec k or Eric Johnson Wiring.

The 2-pole switch can be used in a Varitone notch filter circuit, per Gibson ES-345 guitars. Hardware included. Made by Alpha .

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is mono and is ideal for modern amplifiers from Marshall or the JCM900, although they can be used in other brands such as Fender , Ampeg , Crate, GK ...

The plastic nut is included and has four pins for soldering.

REJECT IMITATIONS!

Original Fender buttons for Fender Telecaster and Precision Bass guitars. Path Number: 0991366000

Mini toggle switch DPDT ON-ON manufactured by the Carling brand. With this mini switch you can make "series / parallel pickup switching", "phase switching" and "humbucker coil tapping" to all guitars on the market.

Potentiometer of the Alpha brand special mini version for those electroacoustic guitars that have a preamp or for use in amplifiers or effects pedals. This brand has been supplying major guitar manufacturers such as Fender , Gibson , Ibanez and many others for many years for their guitars made outside the United States.

Original Fender buttons for Stratocaster model guitars. Path Number: 0991365000

Excellent quality single-stranded cables with 1 meter YELLOW and 1 meter WHITE color cotton coating and "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.

Potentiometer of the Alpha brand of the best value for money. Very accurate and durable.

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is stereo and is ideal for Marshall Fender , Ampeg , Crate, GK amplifiers ...

The nut is included and has six soldering pins.

REJECT IMITATIONS!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1M split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of brands.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

We offer you 2 meters of self-adhesive copper foil tape of the highest quality and with a width of 30 mm (we also sell 50 mm and ideal aluminum tape for your pickguard or for the pads. You can see it by clicking on the icon of our store).

The best kit to not lose treble when you lower the volume of your guitar! This kit is comprised of premium grade electronic components (NOS) made in the United States and the former Soviet Union: a K40Y-9 680pF capacitor and a 150k 1 / 2W Allen Bradley resistor. This kit is designed in the style of Acme Guitar Works (in parallel).

Original Fender brand buttons for Jazz Bass. Path Number: 0991370000

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s.