5x GOLD NUTS AND WASHERS FOR AMERICAN USA JACKS & POTENTIOMETERS

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of brands.

New Production - Made in the USA

Constructed with the finest materials. Comparable to the famous and sought after Vintage Sprague Vitamin Q Capacitors.

Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of BOSS effects pedals and other projects if you need it.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Fender Pilot Light assembly, primary used by Fender® Since the 1950s, Made in USA

mounting diameter: 9/16"  (ca. 14,29mm)

Fits Fender pilot light lens model #47

This jack features a slightly lengthened threaded bushing designed to go through a body with slightly more beef to it. What is really unique is the shorter ground leg which enables you to install it in old SG's and other 60s Gibson s that cannot accept a standard jack which is too long to fit.

20 high quality gold plated pickguard, jack plate or back screws for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

These are the best quality CTS pots available right now. 

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Original Switchcraft brand switch (long size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported.

Potentiometer of the Alpha brand mini dual version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

5 nuts and 5 washers for use in various models of potentiometers with a 24mm base of metric measurements (Japan, China, Korea, Indonesia ...).

Amber color trim lens ideal for new and old Fender amplifiers, although it can be used in several other brands such as Mesa, Magnatone, Peavy, Bogners, Traynors ... The diameter of the base is 1/2 ". It is compatible with Fender # 47 socket and bulbs we also sell in our store.

American metric "vintage" style nut (M12) for use in 3-position selector switches for Gibson Les Paul and SG guitars.

Outer dimension 5/8 "- inside dimension 7/16" 1/8 "collar 15 / 32-32 SAE thread. Nickel Finish

Mini toggle switch DPDT ON-ON. With this mini switch you can do "series / parallel pickup switching", "phase switching" and "humbucker coil tapping" to all the guitars on the market.

Potentiometer of the Alpha brand mini dual version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Switch manufactured by the Carling brand acting as POWER and STANDBY in amplifiers of the Fender brand. The construction, the robustness of its materials and its useful life make them superior to the Chinese.

Fender® string guides (string trees) help minimize tuning problems and sympathetic overtones caused by low string tension.

Mounting hardware included.

Used on American Vintage (USA), Road Worn®, Pawn Shop and Classic Series (Mexico) model

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Authentic and genuine Switchcraft brand model # 12B jacks. Great for use on guitars, effects pedals, and amps. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Emerson Paper In Oil Tone Capacitors

Constructed with the finest materials. Comparable to the famous and sought after Vintage Sprague Vitamin Q Capacitors.

Made in Slovakia. New and impressive quality for amplifiers and Hi-Fi equipment. Solid construction and rich details make this tube one of the best for preamp use.

These compact 500K concentric pots allow you to get the maximum amount of adjustability in a confined control cavity. Includes mounting nuts and washers.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

20 high quality chrome pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measures 3x12mm

American metric "vintage" style nut (M12) for use in 3-position selector switches for Gibson Les Paul and SG guitars.

Outer dimension 5/8 "- inside dimension 7/16" 1/8 "collar 15 / 32-32 SAE thread. Nickel Finish

Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on guitars, effects pedals, and amps. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Excellent quality single-core cables with 1 meter YELLOW and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

5 nuts and 5 washers that can be used in jacks and also in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are of American metric although the pressure washers (Lockwasher) would be missing.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!