4x NICKEL LONG HUMBUCKER MOUNTING RING SCREWS FOR BRIDGE POSITION 2 x 3/4 in.

3-48 X 1 1/4 in. SLOT RH MACHINE SCREW NICKEl. these screws are used to regulate the height of US thread humbucking pickups. They will not fit metric thread pickups. Uses a slotted head like original vintage pickups.

"6-32 X 3/4" "PHILLIPS PAN HEAD NICKEL. This screw is used for height adjustment of single coil US pickups. It will work for many import pickups but some use a very small hole that may have to be opened up. With springs included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Original Fender brand pickup covers for Stratocaster guitars and similar. Path Number: 0991364000

Original set of 24 Phillips head screws (4 x 1/2 ") for pickguard and other plates (Jack Plate) on many Fender instruments.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

3-48 X 1 1/4 in. SCREW NICKEl. these screws are used to regulate the height of US thread humbucking pickups. They will not fit metric thread pickups. Uses a slotted head like original vintage pickups.

2 bolts for use in US made pickup selectors such as CRL or OAK Grigsby. They are not the originals of these brands, but they fit perfectly. MADE IN USA.

10 high quality chrome screws and the correct size for Gibson Les Paul Guitar Truss Rods and the like.

Measurements: 2 x 1/4 in.

CTS pots with a shorter ¼ ”bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Button adapted to the measurements of Switchcraft pickup selectors made in the United States. It does not fit well on Chinese, Korean, Japanese or Mexican guitars that have position switches with metric or "metric" measurements!

If you want an original Switchcraft button visit our store.

Pickup selector trim for Gibson and Epiphone ivory or cream color. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Short screws used to secure a short (neck position) humbucker mounting ring on to a guitar (Pack 4 units)

Original Fender . Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.

Original Fender buttons for Stratocaster model guitars. Path Number: 0991365000

Excellent quality single-core cables with 1 meter WHITE and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer ... guitar to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!