2x CHROME SCREWS 6/32 INCH THREAD FOR CRL & OAK GRIGSBY PICKUP SELECTOR

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

6-32 x 3/8 in. machine screw, round head. For CRL or OAK Grigsby pickup selector.

Short screws used to secure a short (bridge position) humbucker mounting ring on to a guitar (Pack 4 units)

These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer ... guitar to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!

Kit for Fender Jaguar guitars with the highest quality on the market.

2x Sprague Orange Drop 715P 0.01uF (Master Tone Control and 1 Mega Potentiometer)

1x Sprague Orange Drop PS 0.003uF (Mid Tone Control)

1x Allen Bradley 56K Resistor (NOS) (For Master Tone Control)

Original Fender brand pickup covers for Stratocaster guitars and similar. Path Number: 0991364000

Potentiometer of the Alpha brand of the best value for money. Very accurate and durable.

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Potentiometer of the Alpha brand of the best value for money. Very accurate and durable.

"6-32 X 3/4" "PHILLIPS PAN HEAD NICKEL. This screw is used for height adjustment of single coil US pickups. It will work for many import pickups but some use a very small hole that may have to be opened up. With springs included.

10 high quality black pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

Original Fender buttons for Stratocaster model guitars. Path Number: 0991365000

5 original nuts and 5 washers of the Alpha brand (Taiwan) to use in various models of potentiometers with 16mm base. It is sent with two different models of nut as they appear in the photos.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

1 neck mounting screw (8x1-3/4") for most Fender guitars and basses. These screws are 100% original Fender screws.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Three-position selector for Gibson and Epihone brand guitars, specifically the Les Paul and SG models. It is made in the Republic of Korea and is currently one of the best selectors on the market thanks to the use of high quality materials and a much higher robustness compared to the Chinese.

Includes a black trim, washer, and nut.

10 high quality chrome screws and the correct size for Gibson Les Paul Guitar Truss Rods and the like.

Measurements: 2 x 1/4 in.

These are the best quality CTS pots available right now. 

3-48 X 1 1/4 in. SLOT RH MACHINE SCREW NICKEl. these screws are used to regulate the height of US thread humbucking pickups. They will not fit metric thread pickups. Uses a slotted head like original vintage pickups.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

5 original Alpha (Taiwan) brand nuts for use in various models of potentiometers with 16mm base.

5 M8 nuts to use in various metric jack models (Japan, China, Korea, Indonesia ...).

3-48 X 1 1/4 in. SCREW NICKEl. these screws are used to regulate the height of US thread humbucking pickups. They will not fit metric thread pickups. Uses a slotted head like original vintage pickups.

5 nuts and 5 washers for use in various models of potentiometers with a 24mm base of metric measurements (Japan, China, Korea, Indonesia ...).

#5 x 5/8 in. wood screw, oval head

CTS pots with a shorter ¼ ”bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.

20 high quality chrome pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measures 3x12mm

8 X 1-3 / 4 in. PHILLIPS OVAL SMSA NICKEL. These screws are used to secure a bolt on neck to a body. This is the standard length used by Fender ® and it should work for most guitars of comparable construction.

5 original Switchcraft brand nuts to use on various models of their jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric although the pressure washers (Lockwasher) would be missing.

Excellent quality single-core cables with 1 meter BLUE and 1 meter YELLOW color cotton coating, "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...