10x CHROME SCREWS FOR GIBSON LES PAUL AND EPIPHONE TRUSS ROD COVER

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Authentic and genuine Switchcraft brand model #12B jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Three-position selector for Gibson and Epihone brand guitars, specifically the Les Paul and SG models. It is made in the Republic of Korea and is currently one of the best selectors on the market thanks to the use of high quality materials and a much higher robustness compared to the Chinese.

Includes a black trim, washer, and nut.

ON REQUEST. ESTIMATED DELIVERY FROM 7 TO 31 DAYS.

Genuine Gretsch Blacktop Filtertron bridge pickup G5400. Complete assembly includes chrome pickup, silver mounting ring, screws, and springs as shown. Also includes screws to mount assembly to body. MADE IN SOUTH KOREA.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

"6-32 X 3/4" "PHILLIPS PAN HEAD NICKEL. This screw is used for height adjustment of single coil US pickups. It will work for many import pickups but some use a very small hole that may have to be opened up. With springs included.

10 high quality black pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

Pickup selector trim for black Fender Stratocaster guitars. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT OR FENDER MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

CTS pots with a shorter ¼ ”bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.

20 high quality gold plated pickguard, jack plate or back screws for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

PRODUCT ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

100% Genuine part for Fender Mustang and Duosonic guitars. DP3T (double-pole / triple-throw), on / on/on switch has eight lugs, four on each pole.

Original Fender buttons for Stratocaster model guitars. Path Number: 0991365000

Pair of string guides manufactured by Schaller in Alemania for electric guitars. Chrome. They are brand new and unused. They are sold in their original bag. Screws are not included.

For the 3rd string (SOL or G) and 4th string (RE or D)

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Excellent quality single-stranded cables with 1 meter YELLOW and 1 meter WHITE color cotton coating and "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.

Short screws used to secure a short (bridge position) humbucker mounting ring on to a guitar (Pack 4 units)

20 high quality chrome pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measures 3x12mm

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.

Pair of string guides manufactured by Schaller in Alemania for electric guitars. Chrome. They are brand new and unused. They are sold in their original bag. Screws are not included.

For the first string (MI or E) and second string (SI or B)

Original Fender brand pickup covers for Stratocaster guitars and similar. Path Number: 0991364000

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of brands.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

2 bolts for use in US made pickup selectors such as CRL or OAK Grigsby. They are not the originals of these brands, but they fit perfectly. MADE IN USA.

Foot switch for effects pedals or for switching amps and effects pedals (tremolo, switching pedals, reverb, channel ...). Manufactured by Carling in Mexico, this brand is currently the distributor of components for Fender and other renowned brands in the musical instrument scene thanks to its quality, performance and reliability.

Generic but high quality button for CRL, OAK Gigsby or American made position switches. It is used for Fender Stratocaster guitars and the like.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

#5 x 5/8 in. wood screw, oval head

3-48 X 1 1/4 in. SLOT RH MACHINE SCREW NICKEl. these screws are used to regulate the height of US thread humbucking pickups. They will not fit metric thread pickups. Uses a slotted head like original vintage pickups.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

A genuine Gretsch G-logo nickel-finish knob for Electromatic series guitars for 6mm split shaft or solid shaft potentiometers (not valid for imperial potentiometers like CTS, Bourns, Emerson, PEC...) Attaches with a set screw.

Excellent quality single-core cables with 1 meter BLUE AND 1 meter RED color cotton coating, "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Authentic and genuine tin from the German brand Mundorf with one of the highest qualities you can find on the market. Ideal for HI-FI equipment, musical instruments, amplifiers ... that require quality welding.

These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer ... guitar to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

5 original Switchcraft brand nuts to use on various models of their jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric although the pressure washers (Lockwasher) would be missing.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.