Front input jack for use on Digitech brand pedals and multi-effects.

White grease , 7 grams. Multi-purpose grease on EP-lithium basis with PTEE. Commonly used to grease the gear in wahwah pedals to reduce mechanical stress on the potentiometer. Eliminates squeaking due to missing lubrication. Enhances the life-expectance of the pot due to decreased stress on the pot's shaft.

8-pin female connector with various colored cables for use on Wah Dunlop Crybaby pedals and other brands. A loose 8-pin male connector is included. 30cm length

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Guide pressure element to press the gear or "rack" of the wah ( Dunlop ECB127 rack for example). It is shipped in its original bag with screw.

Replacement Dunlop felt pad for use with wah pedals. This circular felt pad has an adhesive side for an easy installation. The pad is typically installed on the underside of the pedal directly above the footswitch to cushion the contact when switching the wah on and off. Made in USA.

Original replacement part for Dunlop® 105Q Crybaby Bass Wah, Dunlop® 535Q Crybaby Multi-Wah, Dunlop® 95Q Crybaby Q-Wah, GCB80, Dunlop® GCB95 Original Crybaby, Dunlop® Dunlop® GCB95 Original CrybabyF Crybaby Classic Wah, Dunlop® JD-4S Rotovibe Expression Pedal, Dunlop® UV1FC Univibe Controller Pedal and others.

Battery holder or battery holder for Wah pedals of the Dunlop brand model Crybaby and similar (part number ECB244BK). It is shipped with its original plastic bag. Made in the USA.

0.8-2kOhm ON, 500kOhm OFF. 550nm

Photoresistance for Morley brand effects pedals. If your effect pedal does not pass a signal, it may be due to the bulb (which we sell in our store) or due to this photoresist.

Made for Dunlop Crybaby and Vox Wah pedals and other applications where small rubber feet are needed. Screws and bag included. Rubber feet are 5/8 "diameter x 1/4" tall. 100% GENUINE!

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Made for Dunlop Crybaby. Suitable for all modern wah pots. 100% Original Dunlop replacement part.

ITEM ON REQUEST! ESTIMATED DELIVERY 5 TO 25 WORKING DAYS.

Wah pot with 16mm body diameter. Unused pullouts from Chinese wah and expression pedals. Some have wires connected to the pins.

Battery holder for Wah pedals from Dunlop model Crybaby and similar (part number ECB244WH). It is shipped with its original plastic bag. Made in the USA.

Original flat spring mechanism for Dunlop Wahwah and Volume footpedals. Fits Dunlop GCB95, BB535, JH-1, JH-1FW, 535Q-B, GCB100, EW-95V, GCB80, JD4S, DB02, GCB95F and similar. MADE IN USA.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Made for Dunlop Crybaby Wah. 100% Original Dunlop replacement part.

Dunlop Crybaby standard foot tread with adhesive backing.

Replacement tube for the Dunlop Heil Talkbox HT-1 and other Talkboxes of several brands. 12mm inner diameter, 16mm outer diameter. Transparent. 2 meters length. It is not original!

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Dunlop original switch cover for Crybaby pedals. It is not shipped in its original bag. ECB137

Generic linear potentiometer to upgrade, modify or repair most of the Dunlop Crybaby on the market and old Wah pedals from Vox. Strong, robust and with a very smooth turn when used. Unbeatable quality - price ratio. Made in the United States and imported.

Generic linear potentiometer to upgrade, modify or repair most of the Dunlop Crybaby on the market and old Wah pedals from Vox. Strong, robust and with a very smooth turn when used. Unbeatable quality - price ratio. Made in the United States and imported.

Generic linear potentiometer to upgrade, modify or repair most of the Dunlop Crybaby on the market and old Wah pedals from Vox. Strong, robust and with a very smooth turn when used. Unbeatable quality - price ratio. Made in the United States and imported.

Generic logarithmic potentiometer to upgrade, modify or repair most of the Dunlop Crybaby on the market and old Wah pedals from Vox. Strong, robust and with a very smooth turn when used. Unbeatable quality - price ratio. Made in the United States and imported.

Original potentiometer made by Ibanez for your WH-10 wah pedal. Dual 500K / 50K and linear.

AUF ANFRAGE! GESCHÄTZTE LIEFERZEIT 5 BIS 31 ARBEITSTAGE!

Dunlop original switch for Crybaby pedals. It is shipped in its original bag. ECB223.

Used in a variety of specialized Dunlop pedals. Has 12 pins for soldering to a PC board in the pedal, circuit is a 4PDT (4 pole, double throw)

Genuine Dunlop inductor for use in wah wah even from Vox brand. It is said that the first wah wah had an inductor just like this at the base of the pedal that made it sound so good. This inductor has a direct impact on the harmonics generated by saturation, since it clips asymmetrically. Hence, its sound is more "musical" and with better quality.

Genuine Dunlop inductor for use in wah wah even from Vox brand. It is said that the first wah wah had an inductor just like this at the base of the pedal that made it sound so good. This inductor has a direct impact on the harmonics generated by saturation, since it clips asymmetrically. Hence, its sound is more "musical" and with better quality.

Top quality wah wah pedal replacement pot 100K made by CTS in USA ready to install. This unit will fit virtually every standard wah pedal out there including most Dunlop models, Vox originals and reissues and most vintage wahs.

Bottom Plate with Battery Door and Rubber Feet for GCB-95. Original Dunlop replacement part.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Original Dunlop brand ECB035 DPDT footswitch for use on MXR and Dunlop effect pedals. It is not compatible with the other ECB555 foot switch model! They are sold in their original bag and hermetically closed.

ON DEMAND! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Genuine Dunlop brand ECB555 DPDT foot switch for use on the following Dunlop and MXR effect pedals.

The McCon-O-Pot is the soul of our McWah. A unit specially designed with the help of CTS to create the rich, thick, and dynamic wah sounds of the old Italian pedals, while providing a smooth taper and long throw, and needing zero cleaning or maintenance. MADE IN USA!

Original potentiometer only for use in the VOX V847A model (not valid for the V847 model). Path Number: 510360524001

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Original Dunlop brand potentiometer compatible with various volume and wah pedals. Made in the USA. ECB078

Vinyl replacement tube for the MXR® Talk Box. Tube length is 6.5 feet.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

250 kΩ gear shaft pot with an audio taper. Original Dunlop replacement part. Used in the Dunlop GCB80 High Gain Volume Pedal.

Path Number: CTS 93303024496 / 0800A

Original 20K potentiometer for Wah bass pedal of the Dunlop brand model Crybaby 105Q and similar (part number ECB024C). Made in Mexico.

Original HOT POTZ potentiometer from Dunlop compatible with the new Wah Wah Crybaby. Made in the USA by CTS.

Original HOT POTZ I potentiometer from Dunlop compatible Wah Wah Crybaby. Made in Mexico by Clarostat in the 90's. New Old Stock.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Original HOT POTZ 470K potentiometer ECB424A manufactured by CTS of the Dunlop brand compatible with High Gain, High Gain Boost and Jimi Hendrix Special Wah Crybaby except for Cry Baby 105Q Bass Wah, Cry Baby Mini 105Q Bass Wah, Geezer Butler Cry Baby Wah and Billy Duffy Cry Baby Wah.

ITEM ON REQUEST! ESTIMATED DELIVERY 5 TO 25 WORKING DAYS.

CryBaby Genuine Replacement Part HI01 Halo Inductor. Used in the famous Clyde McCoy wah, the Halo Inductor is the key to late "60s American wah tone. The Dunlop HI01 Halo Inductor delivers that vintage sound, with its expressive sweep and throaty voice, with minimal microphonic noise due to its stabilized cup- core material. We recommend professional installation by a qualified technician.

ON REQUEST! ESTIMATED DELIVERY 5-31 WORKING DAYS!

Original replacement tread for the Ibanez WH10 wah pedals. Grey plastic.