MULLARD 12AX7 - ECC83 REISSUE VACUUM TUBE AMPLIFIER

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.

6.3mm. horizontal jack.

With extra long contacts, distance to PCB 15mm. Stereo.

The new EL34 Standard 

The  new TAD EL34-STR REDBASE™ developed completely from scratch! Yet, the results are phenomenal.

In the tradition of the legendary Telefunken EL34, the TAD EL34-STR REDBASE™ provides a gorgeous, dynamic and amazingly open in-yer-face tone with just the right amount of angriness. Expect a  clear, harmonic and open top end, a lovely spot-on midrange, with vocal low-mids and a great bass response as you would expect it from a TAD EL34.

Use this to level the final invoice such as forgetting to pay shipping costs or upgrading (from cheap to certified). You can also use it to pay for products on request.

Each "item" equals 0.01 cents. If you need to pay, for example, € 1, you will have to buy 100 items (0.01 X 100 = € 1).

Valve manufactured by New Sensor in Russia (like Mullard ). This 12AX7 is very similar in characteristics to the Mullard 12AX7 with low noise, excellent tonal and harmonic response. Guaranteed results from the first moment!

Before the vacuum valves are shipped, they are tested with an Orange Valve Tester VT-1000!

Excellent quality single-stranded cables with 1 meter YELLOW and 1 meter WHITE color cotton coating and "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.

With the EL844 you will have all the tone but with less volume and with a 25% less performance power thanks to its lower gain which makes it very good to have good distortions at low volumes adding a compression plus to it. With the same good quality as its sister EL84.

100 compatible% with EL84.

This model of Yellow Jackets® converter, the YJR, is an adapter for use in most amplifiers which use 5AR4, 5U4, or 5Y3 tubes or other similar tubes. This Yellow Jacket® is a solid state device and as such does not come with vacuum tubes. Converts most audio amplifiers which use a vacuum tube rectifier 5AR4, 5U4 or 5Y3 to a solid state device. HANDMADE IN THE USA!

Rubber foot for heavy amplifiers, cabinets, effect pedals, dj's .... With steel insert. Diameter: 38mm. Height: 15mm. Hole diameter: 6.5mm. HIGH QUALITY FROM GERMANY!

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on guitars, effects pedals, and amps. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Vacuum valves made in the former Soviet Union by the legendary Reflector factory. Each valve of this model has been tested to determine its gain and grid tension to be able to match them with the maximum precision and with the least % difference with a professional team.

Genuine Fender potentiometer for most current Bassman Amps, many of the 90's Solid State Amps, TB Series, Steel / Jazz King, Acoustasonic Pro, SFXII, BXR Jazzmaster Ultralight, Super Champ and Vibro Champ XD models.

ON REQUEST! ESTIMATED DELIVERY 5 TO 21 WORKING DAYS.

These are so close to the originals we could hardly tell the difference in both appearance and sound. Of course, these are made in Russia and not England like the originals; but that seems to be about the only difference. They really got this one right down to the gold pins, long welded plates, and even the getter shape. These are identical to the originals as far as materials, build quality, design and tone. These are one of the finest new production 12AX7s on the market today and hold up to their vintage counterparts.

Will work in place of: B759, 12AX7, ECC83, 12AX7A, 7025, 12AX7WA, 12AX7WC, 12AX7WB, ECC803S, CV4004, CV492, 12AX7 Gold Pins& more.

Perfect V2 + Preamp Tube - Good Gain - Tight Deep Bass - Fat Mid-range !!

Very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness.
Selected with balanced systems and recommended for guitar amps to improve overall response.

PRODUCT UNDER ORDER! ESTIMATED DELIVERY TIME: 5-20 DAYS.

Made in Russia. This Mullard is one of the best EL84 tubes on the market today for those who need an excellent response in sound and tone. When it distorts you will have a smooth and irresistible overdrive. When you try it you will never buy from another brand again!

Genuine Fender potentiometer for Acoustasonic Pro, SFXII, most 90's Solid State Amps, Jazzmaster Ultralight and TB Series. This potentiometer is 250K 30C Taper. It is not shipped with its original bag.

Made in Russia. One of the best tubes you can buy for your amplifier or sound equipment now reissued by the New Sensor company. Excellent valve for its low noise level and couplings and for its musical details. Ideal to get a more British sound since, it reissues the vintage sound of the 60s quite clearly.

Fender style holder. Fits most American made amps. Fits 3AG fuses. For 6x30mm fuse.

ON REQUEST! ESTIMATED DELIVERY 5 TO 25 WORKING DAYS!

The perfect vacuum tube for Fender Tweed Champ and Deluxe amps! This model withstands high voltages very well and has used the best existing materials to recreate the classic 6V6 of all life, which translates into spectacular sound, low noise and compression compared to the Electro-Harmonix or the JJ Electronic .

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Valves (Matched Pair) modeled after the one made by RCA 6L6GC, have more gain than the Sovtek 5881WXT (about 20% more). These tubes are one of the best 6L6s made today due to their low noise and microphony which gives them an excellent score for detail and harmonic content.

ON REQUEST! ESTIMATED DELIVERY 5 TO 21 WORKING DAYS.

These are so close to the originals we could hardly tell the difference in both appearance and sound. Of course, these are made in Russia and not England like the originals; but that seems to be about the only difference. They really got this one right down to the gold pins, long welded plates, and even the getter shape. These are identical to the originals as far as materials, build quality, design and tone. These are one of the finest new production 12AX7s on the market today and hold up to their vintage counterparts.

Will work in place of: B759, 12AX7, ECC83, 12AX7A, 7025, 12AX7WA, 12AX7WC, 12AX7WB, ECC803S, CV4004, CV492, 12AX7 Gold Pins& more.

Excellent quality single-core cables with 1 meter YELLOW and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

PRODUCT UNDER ORDER! ESTIMATED DELIVERY TIME: 5-20 DAYS.

This is an entirely new design from Sovtek and a great step up in sound quality. They have very large ribbed plates and great sound reproduction. I found them very smooth and well balanced in terms of bass, mids and treble response.

3PDT pushbutton with nine pins to "solder them to the air" for its use in modifications and repairs that demand this type of switches such as effects pedals, wah wah ...

ON DEMAND! ESTIMATED DELIVERY TIME BETWEEN 5 TO 31 DAYS.

Premium directly heated heavy duty rectifier Diode. Re-issue of the most popular rectifier valve ever built by Mullard. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied.

Low internal voltage drop & controlled heater warm up time

Excellent choice for both Hifi and instrument amplification

Replacement/upgrade for all 5AR4/GZ34 types.

Made in Russia. One of the best tubes you can buy for your amplifier or sound equipment now reissued by the New Sensor company. Excellent valve for its low noise level and couplings and for its musical details.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Made in Russia. This Mullard is one of the best EL84 tubes currently on the market for those who need excellent response in sound and tone. When it distorts you will have a smooth and irresistible overdrive. When you try it you will never buy from another brand again!

Clamping tube made of aluminum. Perfectly fits 12AX7, 12AU7, 6N2P and similar valves.

Made in the China.

5.5 cm long by 2.50 cm wide.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Valves (Matched Quad or Quartet) modeled after the one made by RCA 6L6GC, have more gain than the Sovtek 5881WXT (about 20% more). These tubes are one of the best 6L6s made today due to their low noise and microphony which gives them an excellent score for detail and harmonic content.

Mica capacitors imported from the United States (USA).

Mica capacitors imported from the United States (USA).

Rock solid valve capable of handling high voltages. With the JJ 6V6s you will never have to look for NOS valves again, because it is designed like the old ones and even improved giving a sound from Blues to Rock with spectacular results that makes it one of the best 6V6s on the market by far.

Switchcraft original button for pickup selectors of the same brand. It has a quality of finish superior to the generic ones that makes it essential if your Gibson guitar has a certain value so as not to clash with the unique aesthetics of this guitar manufacturer.

Vacuum valve manufactured by JJ Electronic in Slovakia. Robust valve manufactured according to the standards of the old ones, harmonically it is not very rich but it has a slightly higher gain than normal and a low noise level. If you don't want to spend a lot of money this could be your vacuum valve.

American metric "vintage" style nut (M12) for use in 3-position selector switches for Gibson Les Paul and SG guitars.

Outer dimension 5/8 "- inside dimension 7/16" 1/8 "collar 15 / 32-32 SAE thread. Nickel Finish

ON REQUEST! ESTIMATED DELIVERY 5 TO 21 WORKING DAYS.

Perfect copies of the legendary XF2 Mullard EL34 tube from the 60s. It is the perfect tube for the Dynaco ST-70 and for vintage Marshall brand amps although they can be used in all types of current amps. 100% British sound with low noise, good details and excellent sound and performance. One of the best EL34s on the market from a mythical brand.

ON REQUEST! ESTIMATED DELIVERY 5-21 WORKING DAYS!

The TAD 7025 WA delivers full gain with smooth top end. No microphony issues even with the most sensitive preamps. The 7025 WA supports a fat midrange and creates a bold tone with lots of harmonics.

Played clean, the TAD 7025 WA delivers a warm liquid tone which is very responsive to dynamic playing.

Overdriven, the 7025 WA provides lots of sustain with well defined mid-range punch.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

PRODUCT UNDER ORDER! ESTIMATED DELIVERY TIME: 5-21 DAYS.

These 5881 are the best in their category. Low noise level and microphones and with a high level of tonal and harmonic details. Recreated almost 100% from the NOS but at a better price. When you saturate these tubes you will have the professional sound you are looking for. Great for use in Tweed Amps, JTM45 and Bassman amps.

The perfect choice.