TUNG-SOL 6V6GT 6V6 MATCHED PAIR VACUUM TUBES TESTED

Electroswitch on / on / on mini toggle with full size actuator and original Switchcraft ivory or cream tip. Perfect pickup selector switch for tight locations. Comes with one knurled nut, one hex nut and a washer.

Threaded shaft diameter: 12mm
Threaded shaft length: 12mm
Body of switch: 11.4mm x 12.6mm and 13mm depth including solder tags.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

New silicone rings ideal for valves that will prevent vibrations and noise.

Diameter: 30mm

The best kit to not lose treble when you lower the volume of your guitar! This kit is comprised of premium grade electronic components (NOS) made in the United States and the former Soviet Union: a K40Y-9 680pF capacitor and a 150k 1 / 2W Allen Bradley resistor. This kit is designed in the style of Acme Guitar Works (in parallel).

K40Y-9 680pF paper-in-oil or PIO capacitor made in the former Soviet Union. Ideal for use in various electronic projects including "volume treble bleed" or treble bleed.

Generic but high quality button for CRL, OAK Gigsby or American made position switches. Used for Fender Telecaster guitars.

Our Small Bottle Rectifier!

The rectifier tube for smaller vintage amps like the 5F1 Fender Tweed Champ or the Tweed Deluxe 5E3.

This small bottle version is the closest in performance and relaiblity to the vintage 5Y3GT of the 1950s. NOS Made in Russia.

Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.

Perfect copies of the legendary XF2 Mullard EL34 tube from the 60s. It is the perfect tube for the Dynaco ST-70 and for vintage Marshall brand amps although they can be used in all types of current amps. 100% British sound with low noise, good details and excellent sound and performance. One of the best EL34s on the market from a mythical brand.

The Sovtek 5Y3GT tube is an indirectly heated full-wave rectifier tube intended for rectification in general purpose audio equipment. It has a 140 mA maximum output.

In the words of the manufacturer: "Smooth, velvet-like sound. Vintage-vibes galore, great upgrade for Fender s lacking that special kick."

A small resistance coil designed by Kent Armstrong which smooths out the signal and acts as a mid filter. Can be used in conjunction with a push / pull pot or a mini toggle 2 way switch to turn on and off.

Specs and Dimensions:

single wound 1.5 henries
Dimensions = 57/64 in. (23mm) X 47/64 in. (19mm)
Wire lead length = 1 11/64 in. (30mm)

5-position white switch for Fender Stratocaster and Telecaster guitars. The screws and the hood are included (it is white but has a slight yellow hue) as shown in the photos.

LAST UNITS FOR SALE! IT IS THE MOST SEARCHED CAPACITOR BECAUSE THE BEING 400V GIVES A MORE SPECIAL TONE THAN THOSE OF 200, 630 OR 1000 VOLTS. THERE ARE FEW UNITS WORLDWIDE.