cart2 0 Cart
3 Account
Contact us
4 Info
4

Spare Parts for Old Radios

☞ Sockets, tubes, connection terminals, ferrite ... for those radios that do not go out of style. If you can't find the replacement, also look at our spare parts section for amplifiers ッ

Spare Parts for Old Radios

There are 44 products.

Showing 1-44 of 44 item(s)

Active filters

Added to the final invoice

Use this to level the final invoice such as forgetting to pay shipping costs or upgrading (from cheap to certified). You can also use it to pay for products on request.

Each "item" equals 0.01 cents. If you need to pay, for example, € 1, you will have to buy 100 items (0.01 X 100 = € 1).

Price €0.01

1 METER 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken in humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
CHOOSE YOUR COLOR!
Price €2.75

7 PIN MINI TUBE VACUUM...

Seven-pin mini sockets made with Micalex. Its manufacture and the use of top quality raw materials make this socket ideal for use in all types of hi-fi amplifiers, basses and guitars with small internal sizes. Not to be confused with Chinese imitations!

Made in the USA

Price €4.99

GENUINE 9 PIN BELTON PC...

Belton VT9-PT tube socket, 9 pin miniature spread leads, PC Mount.
Phosphorus bronze terminal pins with solder plating for a superior electrical connection.
Glass fiber filled PPS (Micalex) insulating material to allow high voltage operation and protect against arcing.
These sockets are the choice of the most demanding amp builders.
MADE IN KOREA
Price €5.10

9 PIN BELTON MICALEX TUBE...

Sockets 8-pin connector manufactured by Belton in South Korea (Micalex). Its manufacture and the use of premium quality raw materials make this socket ideal for use in all types of hi-fi amplifiers, basses and guitars. As a result, it is the preferred socket for technicians around the world for repairs and new projects. Not to be confused with Chinese imitations!
Price €5.15

GENUINE 9 PIN BELTON TUBE...

Belton VT9-ST-2 tube socket, 9 pin miniature saddle mount-chassis mount.
HOLE DIA .: 3/4 inch, MOUNTING CTR .: 1 1/8 inch, MOUNTING HOLE (Width): 0.14 inch.
Phosphorus bronze terminal pins with solder plating for a superior electrical connection.
Glass fiber filled PPS (Micalex) insulating material to allow high voltage operation and protect against arcing.
Price €5.25

2 METERS 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken in humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
CHOOSE YOUR TWO COLORS!
Price €5.30

BELTON MICALEX 9 PIN TUBE...

Clamping tube made of thinner aluminum and of better quality than the generic ones that will make the heat of the valve dissipate more easily and thanks to it it will work much better. Perfectly fits 12AX7, 12AU7, 6N2P and similar valves.

Made in South Korea.

5.5 cm long by 2.50 cm wide.

Price €5.60

GENUINE 9 PIN BELTON TUBE...

9 pin miniature chassis mount with shield base.
HOLE DIA .: 3/4 inch, MOUNTING CTR .: 1 1/8 inch, MOUNTING HOLE (Width): 0.14 inch.

Phosphorus bronze terminal pins with solder plating for a superior electrical connection.

Glass fiber filled PPS (Micalex) insulating material to allow high voltage operation and protect against arcing.

Price €5.99

8 PIN BELTON TUBE VACUUM...

Sockets 8-pin connector manufactured by Belton in South Korea (Micalex). Its manufacture and the use of premium quality raw materials make this socket ideal for use in all types of hi-fi amplifiers, basses and guitars. As a result, it is the preferred socket for technicians around the world for repairs and new projects. Not to be confused with Chinese imitations!
Price €6.25

8 PIN BELTON MICALEX TUBE...

Sockets 8-pin connector manufactured by Belton in South Korea (Micalex). Its manufacture and the use of premium quality raw materials make this socket ideal for use in all types of hi-fi amplifiers, basses and guitars. As a result, it is the preferred socket for technicians around the world for repairs and new projects. Not to be confused with Chinese imitations!
Price €7.25

3 METERS 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken in humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
CHOOSE YOUR THREE COLORS!
Price €7.65

GENUINE 8 PIN BELTON TUBE...

Belton 8 pin octal, chassis mount. HOLE DIA .: 1 3/16 inch, MOUNTING CTR .: 1 1/2 inch, MOUNTING HOLE (Width): 0.21 inch.
Phosphorus bronze terminal pins with solder plating for a superior electrical connection.
Glass fiber filled PPS (Micalex) insulating material to allow high voltage operation and protect against arcing.
Price €7.25

NEOHM POTENTIOMETER 200K...

Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.

Great for antique radios. 24mm body solid shaft length 1/4 "diameter. 200K linear. Twist tab mount.

MADE IN ITALY.

Price €8.15

NEOHM POTENTIOMETER 500K...

Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.

Great for antique radios. 24mm body solid shaft length 1/4 "diameter. 500K linear. Twist tab mount.

MADE IN ITALY.

Price €8.15

NEOHM POTENTIOMETER 2M MEG...

Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.

Great for antique radios. 24mm body solid shaft length 1/4 "diameter. 2 Meg linear. Twist tab mount.

MADE IN ITALY.

Price €8.15

NEOHM POTENTIOMETER 100K...

Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.

Great for antique radios. 24mm body solid shaft length 1/4 "diameter. 100K linear. Twist tab mount.

MADE IN ITALY.

Price €8.15

NEOHM POTENTIOMETER 250K...

Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.

Great for antique radios. 24mm body solid shaft length 1/4 "diameter. 250K linear. Twist tab mount.

MADE IN ITALY.

Price €8.15

8 PIN BAKELITE VACUUM TUBE...

Protect the 8 pin sockets on your tube tester with these simple to install 8 pin socket savers. If you regularly test 8 pin tubes, then these 8 pin socket savers with save you time and money. Better to wear out these socket savers than the tube sockets in your amp or tube tester. MADE IN USA

100% VINTAGE!

For 6L6 6V6 6SN7 EL34 ST8-1000 KT-88 ...

Price €8.70

1 METER 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken in humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
YOU CHOOSE THE FOUR COLORS!
Price €9.80

1 METER 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken in humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
YOU CHOOSE THE FIVE COLORS!
Price €11.75

1 METER 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken on humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
YOU CHOOSE THE SIX COLORS!
Price €13.50

1 METER 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken on humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
CHOOSE YOUR SEVEN COLORS!
Price €15.05

1 METER 20 AWG VINTAGE...

High quality single conductor cable made in the USA for wiring all types of old or new amplifiers and radios. Withstands up to 600V and a temperature of 105º degrees maximum. Ideal for those amplifiers or radios that have taken on humidity and therefore make a lot of noise or to give it a "vintage" touch in new projects.
CHOOSE YOUR EIGHT COLORS!
Price €16.40

Shopping Cart

Cart is empty

3

Search

You can try some popular tags here:

Account

No account?
Create one here
4