CAPACITOR K40Y-9 0.022UF 400V PIO PAPER IN OIL MOST WANTED LAST UNITS!

10 high quality black pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

Excellent quality monofilar cables with BLACK cotton coating type "Vintage" and with a single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

3-way selector made by the Electroswitch company in the United States, famous for its high resistance to use, almost 0% noise and its ease to solder the cables in it. This brand of selector has been around since the early days of the electric guitar and is the best you can find on the market today.

Input jack for basses or guitars and effect pedals. 3 pins T / R / S, double close circuit. Nut and washer included. Made in USA.

Excellent quality single-core cables with 1 meter RED and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/8 in.

Length of Shaft 3/8 in.

Made in the USA.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with humbucker or single coil pickups of any guitar brand but especially for Gibson Les Paul or SG. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.

Original Switchcraft brand switch (short size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported. The original Switchcraft black hood or hood is included.

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots.

Replacement knob set for the most common concentric stacked potentiometers like Fender or Alpha Taiwan. Very High Quality made in South Korea.

K40Y-9 680pF paper-in-oil or PIO capacitor made in the former Soviet Union. Ideal for use in various electronic projects including "volume treble bleed" or treble bleed.

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses. But best of all, Pure Vintage guitar and amp electronics are also versatile enough to fit most Fender guitars and tube amplifiers, making it easier than ever to inject that vintage vibe into any setup.

Pure Vintage Wax Paper Capacitor, .05uf @ 150V

Replicas of original-style capacitors

Wax paper construction for warm vintage tones

Used in tone circuit of vintage Telecaster® guitars

Fits most vintage and modern Telecaster guitars

These are the best quality CTS pots available right now. 

Non original button for Gibson, Epiphone and other guitars made in South Korea. This button can only be used on those potentiometers with American measurements (not metric!) from Bourns, CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Excellent value for money.

"6-32 X 3/4" "PHILLIPS PAN HEAD NICKEL. This screw is used for height adjustment of single coil US pickups. It will work for many import pickups but some use a very small hole that may have to be opened up. With springs included.

Finally, a correct mounting screw for P90 pickups. you no longer have to just make do. This screw is made specifically to fit a P90 pickup. 2.8 mm x 32 mm

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

A small resistance coil designed by Kent Armstrong which smooths out the signal and acts as a mid filter. Can be used in conjunction with a push / pull pot or a mini toggle 2 way switch to turn on and off.

Specs and Dimensions:

single wound 1.5 henries
Dimensions = 57/64 in. (23mm) X 47/64 in. (19mm)
Wire lead length = 1 11/64 in. (30mm)

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

Two potentiometers in one for you Fender Jazz Bass or Telecaster designed by CTS ! Stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. ATTENTION! the top / volume section is 500K and the bottom / tone section is 500K

Excellent quality monofilament cable with YELLOW cotton coating "Vintage" type, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or a screen or to make the typical old amp braided cable.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

New Production - Made in the USA

Emerson Paper In Oil Tone Capacitors

Constructed with the finest materials. Comparable to the famous and sought after Vintage Sprague Vitamin Q Capacitors.

6 X 1 1/4 "PHILLIPS ROUND HEAD WOOD SCREW NICKEL. This screw is used to secure vintage and vintage style 6 hole tremolos to the body of a guitar.

ON REQUEST! ESTIMATED SHIPPING TIME OF 3 TO 35 DAYS. CONSULTATION BEFORE BUYING.

The set mounted on the Fender Custom Shop Master Built Michael Landau Signature Stratocaster HH by Jason Smith.

Excellent quality single-core cables with 1 meter WHITE and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of basses and guitars of any brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. On YouTube and on the Internet you can check the quality of this article.

These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer ... guitar to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Generic but high quality button for CRL, OAK Gigsby or American made position switches. It is used for Fender Stratocaster guitars and the like.

Authentic and genuine tin from the German brand Mundorf with one of the highest qualities you can find on the market. Ideal for HI-FI equipment, musical instruments, amplifiers ... that require quality welding.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

The best kit to not lose treble when you lower the volume of your guitar! This kit is comprised of premium American made electronic components: a 0.022uF Sprague Orange Drop capacitor and a 150k 1 / 2W Allen Bradley resistor (NOS).

The best kit to avoid losing treble when lowering the volume of your guitar especially in single coil pickups! This kit is made up of premium quality electronic components made in Mexico: a 0.002uF 6PS Sprague Orange Drop capacitor and a 130k 1 / 2W Allen Bradley resistor.

Original pack of 5 Allen Bradley 130K 1 / 2W resistors.

Excellent quality monofilament cables with WHITE cotton coating type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

The Sovtek 5Y3GT tube is an indirectly heated full-wave rectifier tube intended for rectification in general purpose audio equipment. It has a 140 mA maximum output.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

The best kit to not lose treble when you lower the volume of your guitar! This kit is comprised of premium grade electronic components (NOS) made in the United States and the former Soviet Union: a K40Y-9 680pF capacitor and a 150k 1 / 2W Allen Bradley resistor. This kit is designed in the style of Acme Guitar Works (in parallel).

New Production - Made in the USA

Constructed with the finest materials. Comparable to the famous and sought after Vintage Sprague Vitamin Q Capacitors.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of brands.

Excellent quality single-stranded cables with 1 meter YELLOW and 1 meter WHITE color cotton coating and "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.