AUDIO/LOG 500K PUSH-PUSH POTENTIOMETER SHORT SHAFT 3/8 INCH MADE IN USA!

Super switch manufactured by Fender for use in various models of the brand and even for other manufacturers. Exceptional quality with zero noise. It is shipped in its original bag with two "tip caps" or hoods. Path Number: 0992251000. Made in Mexico.

LAST UNITS FOR SALE! IT IS THE MOST SEARCHED CAPACITOR BECAUSE THE BEING 400V GIVES A MORE SPECIAL TONE THAN THOSE OF 200, 630 OR 1000 VOLTS. THERE ARE FEW UNITS WORLDWIDE.

Authentic and genuine Switchcraft brand jack model # L11 (jack is slightly longer than model # 11!). Great for use on your Fender guitar or stomp box, although it can be used on amps without any problems. Very hard and resistant and with a quality proven for many years.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.

Three-position selector switch in chrome with black button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and nut are included.

Original Switchcraft brand switch (short size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported. The original Switchcraft black hood or hood is included.

Excellent quality single-core cables with cotton coating of 1 meter YELLOW and 1 meter RED type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Excellent quality monofilament cable with YELLOW cotton coating "Vintage" type, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or a screen or to make the typical old amp braided cable.

Excellent quality monofilament cables with WHITE cotton coating type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Authentic and genuine Switchcraft brand model #12A jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/8 in.

Length of Shaft 3/8 in.

Made in the USA.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. Two washers and two nuts are included.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.

A small resistance coil designed by Kent Armstrong which smooths out the signal and acts as a mid filter. Can be used in conjunction with a push / pull pot or a mini toggle 2 way switch to turn on and off.

Specs and Dimensions:

single wound 1.5 henries
Dimensions = 57/64 in. (23mm) X 47/64 in. (19mm)
Wire lead length = 1 11/64 in. (30mm)

Original Fender buttons for Stratocaster model guitars. Path Number: 0992035000

The best kit to not lose treble when you lower the volume of your guitar! This kit consists of premium electronic components (NOS) made in the United States and the former Soviet Union: a 680pF Paper in Oil or PIO K40Y-9 capacitor and a 220K 1 / 2W Allen Bradley resistor. This kit is designed in the style of Acme Guitar Works (in parallel).

The best kit to avoid losing treble when lowering the volume of your guitar especially in single coil pickups! This kit is comprised of premium American-made electronic components: a 0.0012uF Sprague Orange Drop capacitor and a 130k 1 / 2W Allen Bradley resistor.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effect pedals or amps.

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

Original Switchcraft brand switch (short size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported. Hood or hood is not included!

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Oak Grigsby brand original three-position selector for Fender Telecaster guitars and all those guitars that also request a selector of these characteristics. It is a high quality position selector that will provide you with better performance and a low noise level. It fits perfectly in those Telecasters from the mid-seventies to now and high-end Mexican ones.

Three-position selector switch in chrome with white button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and the nut are included.

Excellent quality single-core cables with 1 meter BROWN and 1 meter RED color cotton coating type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Excellent quality single-core cable with 1 meter WHITE and 1 meter BLUE color "Vintage" color cotton coating, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with single coils of any guitar brand but especially the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

2 Conductor Cable for basses and guitars. # 28 AWG 7/36 TC, PVC insulation, Color Code Black & White, Drain Wire, Black PVC Jacket to a nominal .107 in. OD

MADE IN USA.

We offer you 1 meter of self-adhesive copper foil tape of the highest quality and with a width of 30 mm (we also sell 50 mm and ideal aluminum tape for your pickguard or for the pickups. You can see it by clicking on the icon of our store).

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

This Japanese New OLD STOCK ceramic capacitor will be used to make the treble bleed or "treble bleed" on your PRS guitar.

Generic but high quality button for CRL, OAK Gigsby or American made position switches. It is used for Fender Stratocaster guitars and the like.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

Chrome black three-position selector switch with black button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and the nut are included.

These are the best quality CTS pots available right now. 

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Mallory 150M Series condenser ideal for all types of guitars with humbucker pickups. This capacitor is the same one you can find in the PRS or Paul Reed Smith.

Excellent quality shielded and braided "Vintage" type cable to internally wire your Gibson guitar in the purest style of the 50's or 60's ("50's Wiring"). The cable can also be used to wire a combo or display or to make the typical old amp braided cable. Diameter is 0.070 "(1.78mm).

Excellent quality monofilar cables with BLACK cotton coating type "Vintage" and with a single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".