AUDIO / LOG 500K PUSH-PUSH POTENTIOMETER SHORT SHAFT 3/8 INCH - MADE IN USA!

Excellent quality single-core cables with cotton coating of 1 meter YELLOW and 1 meter RED type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Three-position selector switch in chrome with white button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and the nut are included.

This Japanese New OLD STOCK ceramic capacitor will be used to make the treble bleed or "treble bleed" on your PRS guitar.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

We offer you 1 meter of self-adhesive copper foil tape of the highest quality and with a width of 30 mm (we also sell 50 mm and ideal aluminum tape for your pickguard or for the pickups. You can see it by clicking on the icon of our store).

5-way selector made by the Electroswitch company in the United States, famous for its high resistance to use, almost 0% noise and its ease to solder the cables in it. This brand of selector has been around since the early days of the electric guitar and is the best you can find on the market today.

Non-original button for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effect pedals or amps.

Excellent quality single-core cable with 1 meter WHITE and 1 meter BLUE color "Vintage" color cotton coating, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Authentic and genuine Switchcraft brand model #12A jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

2 Conductor Cable for basses and guitars. # 28 AWG 7/36 TC, PVC insulation, Color Code Black & White, Drain Wire, Black PVC Jacket to a nominal .107 in. OD

MADE IN USA.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/8 in.

Length of Shaft 3/8 in.

Made in the USA.

The best kit to avoid losing treble when lowering the volume of your guitar especially in single coil pickups! This kit is comprised of premium American-made electronic components: a 0.0012uF Sprague Orange Drop capacitor and a 130k 1 / 2W Allen Bradley resistor.

Original Switchcraft brand switch (short size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported. Hood or hood is not included!

New and unused input jacks compatible with Fender Stratocaster and similar guitars. It comes included with the housing, jack, washer, nuts and the two screws for fastening.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

A small resistance coil designed by Kent Armstrong which smooths out the signal and acts as a mid filter. Can be used in conjunction with a push / pull pot or a mini toggle 2 way switch to turn on and off.

Specs and Dimensions:

single wound 1.5 henries
Dimensions = 57/64 in. (23mm) X 47/64 in. (19mm)
Wire lead length = 1 11/64 in. (30mm)

Excellent quality shielded and braided "Vintage" type cable to internally wire your Gibson guitar in the purest style of the 50's or 60's ("50's Wiring"). The cable can also be used to wire a combo or display or to make the typical old amp braided cable. Diameter is 0.070 "(1.78mm).

Super switch manufactured by Fender for use in various models of the brand and even for other manufacturers. Exceptional quality with zero noise. It is shipped in its original bag with two "tip caps" or hoods. Path Number: 0992251000. Made in Mexico.

Authentic and genuine Switchcraft brand jack model # L11 (jack is slightly longer than model # 11!). Great for use on your Fender guitar or stomp box, although it can be used on amps without any problems. Very hard and resistant and with a quality proven for many years.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.

Non-original button for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. Two washers and two nuts are included.