Rotary switch BY Alpha Taiwan with 6 Positions and 2 poles. D-Shaft with 1/4 inch, Mounting 3/8 inch, non-shorting, with solder lugs, can be set to 2-5 positions. Perfect replacement for the VOX AC30 Vibrato / Tremolo switch and Orange FAC Switch.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Marshall Knob for Miniswitch MESWTP00050 and MESWTP00020

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Used in Peavey Classic 30, Delta Blues: Boost Switch.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

e.G.: Screamer 50 (E335)

PUJ-2-2

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

3 positions (Hi-STBY-LOW). Used by Marshall in the Studio Classic line: SC20C, SC20H and Studio Jubilee series: 2525H, 2525C.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Used by Marshall, Miniswitch, Marshall JCM900, High Gain Dual Reverb, 4100, 4101, 4102, 4500, 4501, 4502, 2100SL-X etc.

Short stroke push switch 2-pack for Fender Deluxe 90 DSP combo amplifier. Original replacement.

Pack 2 items.

Solid black standby switch for Marshall JCM series and others.

Mounting dimensions: 22.5x22x27mm or 15/16" x 1 1/16" x 1" deep

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Mini Toggle Switch, VOX AC30CC, AC30CCH

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Original Marshall replacement part. Black rocker switch for MG amps.

Original Blackstar switch. It is not shipped in its original bag.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Original power switch (220V). 

used by Marshall in the Studio Classic line: SC20C, SC20H

Studio Jubilee series: 2525H, 2525C. 

Info: this mains switch has different dimensions than the MRS-4 and therefore cannot be used as its replacement.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

e.G.: Screamer 50 (E335)

Original Fender switch manufactured by Carling for various models of the brand's amplifiers (Power and Standby - 2 position). It is shipped in its original bag and with two nuts. Path Number: 0036572000

Original Marshall switch for your JFX1 signal processor. It is sent without the original bag.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Marshall, Switch incl. knob for AVT150.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS.

Black, Medium, Single-Slotted Knob

Used on:

Bass Prodigy Four:88 (DI & Level control only)

Bass Strategy Eight:88 (DI & Level control only)

Big Block Titan V12 (Black Chassis Version)

Boogie 5 Band Graphic EQ

Express 5:25+

Express 5:50+

Flux Drive

Flux Five

Grid Slammer

JP-2C

M9 Carbine

Mark Five:25

Mark Five:35

Mark V

Throttle Box

Throttle Box EQ

Tone Burst

WalkAbout (Black Chassis Version)

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Highest quality component and very powerful performance, rated 6A@125V, SPTT 1 pole, 3 positions. 

Perfect replacement for old Marshall with a defective selector slot. 

NOTE: we recommend to order a 2nd nut HR1021for proper mounting

Matching black anodized plate for direct mounting please look at item"BM-SW1-BLECH". 

Resistive Load: 6A @ 125V AC, 3A @ 250V AC

Contact Resistance: 20 milliohms maximum

Insulation Resistance: 100 megohms minimum @ 500V DC

Dielectric Strength: 1,500V AC minimum

Electrical Life: 5,000 cycles

Indexing: 45°

Contact Timing: Nonshorting

Marshall, Miniswitch, DPDT. Used by Marshall in the New Valvestate, EL2020, JVM410,TSL100, MG Serie, MG100DFX (CLEAN/CRUNCH, channel switch, OD1/2, FDD)

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original power switch for Vox NT2H and LIL 'NIGHT TRAIN amps. It is sold without its original packaging. Made in the USA.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Marshall, Impedance and Modeswitch (HIGH-LOW, PENTODE-TRIODE), , JCM900 Series: High Gain Dual Reverb and 4100, 4101, 4102, 4500, 4501, 4502, 2100SL-X, also used in the JCM2000 Series (DSL50/100, TSL50/100 etc.). MESWTP00001

Marshall toggle switch, latching 2 position DPST (ON-OFF). 15A 250VAC rating. Used for Mains and Standby switch in Marshall 1959SLP, 1987X, 2245 and others. Included two nuts.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 DAYS!

Marshall, Miniswitch, 4PDT. Used in the JCM2000 Series, DSL100 and DSL50 as Tone-Shift and Clean/Crunch.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS.

Switch for Mesa Boogie- 2 Position, Power/Standby. (# 600631). 

Used on: 

Badlander

Bass Prodigy

Bass Strategy

Dual Rectifier

Express Series

JP-2C

Lone Star

Lone Star Special

M6 & M9 Carbine

Mark I Reissue

Mark V

Mini Rectifier: 25

Rectifier Recording Preamp

Recto-Verb: 25

Road King

Roadster

Triple Crown

Triple Rectifier

WalkAbout

Channel mini switch, PC-Mount, used as replacement on Marshall JCM900, High Gain Dual Reverb , 4100, 4101, 4102, 4500, 4501, 4502, 2100SL-X etc. Illuminated.

Power switch for Marshall Valvestate Series. Replacement for new Valvestate series VS100, VS265 etc.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS.

Switch for Mesa Boogie- 3 Position, Power. (# 600639). 

Used on: 

Lone Star

Mark I Reissue

Mark V

Roadster

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Primary used by  Marshall® JCM800 series (2203, does NOT fit Reissue model), late Marshall JMP series, Silver Jubilee Serie (2555, 2554, Does not fit Reissue: 2555X), Orange Amps like the Super Bass, with 5 Pins 

Perfect replacement for the original "Arrow" switch with same shape and function.

Connections are mirrored compared to the original.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

230V power switch, red with light indicator; primary used by  Marshall® JCM 900 and JCM2000 series and Reissues (Randy Rhoads, Kerry King etc.). 

Also used in the JVM Series like JVM410H, JVM410C, JVM210H, JVM205H, JVM205C, JVM215C. 

PART No. 1610NRNB5NKR250V 

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Vintage style Rotary Voltage Selector Switch by Carling , black knob included. As used by Fender and Mesa Boogie in the 60s -80s. 6 positions.

3A 250 VAC
6A 125 VAC

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

e.G.: Screamer 50 (E335)

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Original Peavey impedance slide switch like used in Peavey 5150 II, 6505+, Triple XXX and many others.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Marshall Impedance Selector for Reissue Serie, used in 1959, 1987, 2203, 2245 etc. Fits also Kerry King and Randy Rhoads models!.

Needs 30mm drill, mounting: 38mm.

Does not fit in old Marshalls with the plugs!

For older Marshalls please check  "matching products".

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Marshall Voltage Selector for Reissue Serie,  1959SLP, 1987, 2203, 2245 etc. Fits also Kerry King and Randy Rhoads Marshalls!

Needs a 30mm drill, Mounting on 38mm

Does not fit in old Marshalls!