TIN 1 MT 6.56 FT GENUINE MUNDORF BEST SUPREME GOLD SOLDER SILVER

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Authentic and genuine Sprague Orange Drop 225P series (polyester) capacitors made in Mexico. Ideal for use in single coil guitar pickups as an intermediate capacitance value between 0.022uF and 0.033uF.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Two string guides for American, American Standard, American Special and American Deluxe guitars. Improves string pressure on the nut and tuning. Mounting accessories included.

Authentic and Genuine Sprague Orange Drop 715P Series Capacitors Made in America. They are the condensers preferred by technicians around the world who repair vintage amplifiers from brands such as Fender , Ampeg , Magnatone, Marshall , Valco among many other brands. They are also ideal for guitars and basses, HI-FI stereos, and vintage radios.

Excellent quality single-core cable with 1 meter WHITE and 1 meter BLUE color "Vintage" color cotton coating, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

The 5B5-01 model delivers 10-position Free-Way switching in a Blade format with black and white tip which is directly interchangeable with conventional 5-way selectors.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1 Meg solid shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with humbucker or single coil pickups of any guitar brand but especially for Gibson Les Paul or SG. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

4 Conductor Cable for basses and electric guitars. # 28 AWG 7/36 TC, PVC insulation, Color Code Black, White, Green & Red, Drain Wire, Foil Shield (facing in), nominal .020 wall Black PVC Jacket to a nominal .126 in. OD

MADE IN USA.

Want to get the sound of Tom Morello, Jack White or Buckethead? Well now you have it much easier with this button that you can insert it into your guitar just by making a hole and wiring it according to the diagrams that run on the Internet.

Generic but high quality button for CRL, OAK Gigsby or American made position switches. It is used for Fender Stratocaster guitars and the like.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

Kit for Fender Telecaster model guitars with the highest quality on the market! All components of this kit are made in the United States (except for the capacitor that was made in the former Soviet Union) with the best materials to give it the highest quality, sound, a very long useful life and low noise.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Excellent quality monofilament cable with YELLOW cotton coating "Vintage" type, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or a screen or to make the typical old amp braided cable.

ON REQUEST. DELIVERY IN 7-21 DAYS.

Genuine Fender American Professional / American Standard Staggered Stratocaster Telecaster tuning machines. Set of six tuners designed to fit most modern-style Fender electric guitars with dual-pin mounting configuration.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of brands.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Guitar volume and tone 300k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Black 5-position switch for Fender Stratocaster and Telecaster guitars. The hood is included as shown in the photos.

A 9V battery box for use in guitars that need power for active circuitry. Will most likely require modification to the back of the instrument to install. MADE IN JAPAN.

Excellent quality single-core cables with 1 meter BLUE AND 1 meter RED color cotton coating, "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

New Production - Made in the USA

Constructed with the finest materials. Comparable to the famous and sought after Vintage Sprague Vitamin Q Capacitors.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

The 3B3-01 model delivers 6-position Free-Way switching in a Blade format which is directly interchangeable with conventional 3-way selectors.

Original Fender brand potentiometer (part number 0021682049) manufactured by CTS . This potentiometer is used for tone control in Eric Clapton's mod kits. It is shipped in its original bag. Washer and nut not included.

Excellent quality monofilar cables with BLACK cotton coating type "Vintage" and with a single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Excellent quality single-core cables with 1 meter WHITE and 1 meter BROWN color cotton coating "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.

PRODUCT ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

100% Genuine part for Fender Mustang and Duosonic guitars. DP3T (double-pole / triple-throw), on / on/on switch has eight lugs, four on each pole.

The 5B5-02 model delivers 10-position Free-Way switching in a Blade format which is specially optimized for HSH pickup configurations.

ON REQUEST! DELIVERY TIME BETWEEN 5-25 DAYS.

This is a 4-Way Tele prewired assembly for Telecaster style guitars featuring 2 single coil pickups. It will drop into most Mexican or American Fender Teles with no modification.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

Kit for Fender Stratocaster model guitars with the highest quality on the market. All the components of this kit are made in the United States with the best materials to give it the highest quality, sound, a very long useful life and low noise.

The best kit to avoid losing treble when lowering the volume of your guitar especially in single coil pickups! This kit is made up of premium quality electronic components made in Mexico: a 0.002uF 6PS Sprague Orange Drop capacitor and a 130k 1 / 2W Allen Bradley resistor.

These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer ... guitar to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Excellent quality mono-core cables with BROWN AND BLUE cotton coating type "Vintage" and with a single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... Cables too They can be used to wire a combo or display or to make the typical old amp braided cable.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

CAUTION: In some Les pauls, Este potentiometer can be very large!

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

PRODUCT UNDER ORDER! ESTIMATED DELIVERY TIME: 10-31 DAYS.

Genuine Fender ® Original Bass bridge. Features original nickel finish and threaded saddles. Includes screws.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Mini toggle switch DPDT ON-ON manufactured by Dailywell Electronics. With this mini switch you can do series/parallel pickup switching, phase switching and humbucker coil tapping on all guitars on the market.

Potentiometer for controlling the volume or tone of active pickups, or for use after the preamp of a piezo-saddle electric guitar bridge. Made by CTS in USA for TAD Tube Amp Doctor. Each CTS pot includes a lock washer and one hex mounting nuts.

Body Diameter: 24 mm

Power Rating ⅓ watt

Bushing Diameter: ⅜" (Threading: 3/8-32)

Bushing Length: ¼"

Shaft Diameter: ¼"

Shaft Length: ⅜"

Shaft Material: Aluminum - Solid Shaft

These are the best quality CTS pots available right now. 

Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.

Clamping tube made of thinner aluminum and of better quality than the generic ones that will make the heat of the valve dissipate more easily and thanks to it it will work much better. Perfectly fits 12AX7, 12AU7, 6N2P and similar valves.

Made in South Korea.

5.5 cm long by 2.50 cm wide.