ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original Marshall mains transformer, Valvestate 8020, T2949

Transformator Type: MainTransformer

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original Marshall Output transformer, 100W, JCM800 Kerry King Signature, 2203KK, D5446

Transformator Type: Output Transformers

Stack: EI120

Transformer Power: 100VA

OT-Tubes: KT88

OT-Impedance: 4+8+16 ohms

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Choke for all Valve Marshalls with 100W / 50W, up to JCM800 Range like 2203, 2204, 2205, 2210, 1959, 1987,  1992 and many others. 

data: 5 H, 120mA DC, Rdc 115 Ohm. 

Mounting on 44.5mm x 40mm 

replacement for INDT00013 and Drake 1471-263 

Upgrade for the Marshall JCM2000 series: replaces R71 (270 Ohm/7W) in TSL and DSL100 models. 

also very usefull as a modification on the Marshall JVM Series (410H, 410C, 210H, 205H, 205C, 215C), replaces R106 (470Ohm/7W). 

Replacement for Laney #6013 choke also!

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original Marshall® MAINS transformer for DSL40C. 

Primary 230V.

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains Transf. 2x340V 

NOS original Marshall mains transformer, 292-516

Made in England 

Special Item! 

Lamination 3", Stack 1" 

Mounting on 93mm 

Limited Supply 

Primary:                  

      0V      #1

      117V      #2                        

      0V      #5

      117V      #6                 

Secondary:                        

      17V@0.8A      Red

      0V            Black

      17V            Red

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains-Transformer for Marshall Artist 3203/4203 

Upgrade for the Dagnall 1961-112 und 1961-116 

NEW Version: Includes top shroud 

117V and 230V/240V operation possible 

Primary:                  

      117V            #9

      0V            #10                  

      117V            #12

      0V            #13 

Secondary:                  

      347V@180mA      #4

      0V            #5                  

      6,3V@3.5A      #6

      0V            #7                  

      20.75V@420mA      #1

      0V            #2

      20.75V            #3

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original Marshall® MAINS transformer for MA50H. 

Primary 230V. 

Primary:

      230V      Brown

      0V      Blue                                    

Secondary:                                    

      HV      Red

      0V      Red                        

      6,3V      Orange

      0V      Orange                  

      Bias      Purple

      0V      Black                                    

      LV      Yellow

      0V      Yellow

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains-Transformer for Marshall Artist 3203/4203 

Upgrade for the Dagnall 1961-112 und 1961-116 

NEW Version: Includes top shroud 

117V and 230V/240V operation possible 

Primary:                  

      117V            #9

      0V            #10                  

      117V            #12

      0V            #13 

Secondary:                  

      347V@180mA      #4

      0V            #5                  

      6,3V@3.5A      #6

      0V            #7                  

      20.75V@420mA      #1

      0V            #2

      20.75V            #3

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Power transformer for Laney LC15R, LC15, VC15 (p/n 6094).

Upgraded Laney Part with superior M6 quality lamination also used in Laney Cub 10, Cub 12 and Lionheart L5T

Lamination: 2-5/8" (EI66) , Stack: 1 ½" (38mm)

Primary:            #770005

      117V            #6

      0V            #7                  

      117V            #9

      0V            #10                  

Secondary:                  

      240V      100mA      #11

      20V            #12

      0V            #13

      20V            #14

      240V            #15                  

      3.15V      2.5A      Grey

      0V            Red

      3.15V            Grey

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

NOS original Marshall mains transformer, T-4970.

Made in England. 

Special item from old Marshall repair stock. 

Lamination 4 1/2", Stack 2" 

Mounting on 2 1/2" x 2 3/4" 

Limited Supply 

Primary:            

      0V      

      115V      

      220V            

      240V         

Screen:      GN/YEL

Secondary:                        

      22V@3.2A      Black

      0V            Red

      22V@3.2A      Black

Transformator Type: MainTransformer

Stack: EI114(4.5 Inch)

PT-Primary: 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

NOS original Marshall mains transformer, for solid state amps. 

Made in England. 

Special item from old Marshall repair stock. 

Lamination 4 1/2", Stack 1 3/4" 

Size: L x W x H: 116mm x 98mm x 107mm 

Limited Supply 

No further info available 

Primary:            

      0V      Orange      

      110V      Pink

      120V      Red

      220V      Blue

      240V      Viol                   

Secondary:                        

      30V@2.5A      Black

      0V            Yellow

      30V@2.5A      Red

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original Marshall® MAINS transformer for MA100C. 

Primary 230V. 

Primary:

      230V      Brown

      0V      Blue                                    

Secondary:                                    

      HV      Red

      0V      Red

      6,3V      Orange

      0V      Orange

      Bias      Purple

      0V      Black

      LV      Yellow

      0V      Yellow

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original Marshall® MAINS transformer for MA50C. 

Primary 230V. 

Primary:

      230V      Brown

      0V      Blue                                    

Secondary:                                    

      HV      Red

      0V      Red                        

      6,3V      Orange

      0V      Orange                  

      Bias      Purple

      0V      Black                                    

      LV      Yellow

      0V      Yellow

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Original Marshall® MAINS transformer for MA50H. 

Primary 230V. 

Primary:

      230V      Brown

      0V      Blue                                    

Secondary:                                    

      HV      Red

      0V      Red                        

      6,3V      Orange

      0V      Orange                  

      Bias      Purple

      0V      Black                                    

      LV      Yellow

      0V      Yellow

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Can be used with Rectifier tubes EZ81 (6.3V) and GZ34/5AR4 (5V).

Made in Europe to Dagnall specs.

For 2x EL84 and up to 4x ECC83, lay-down type: Lamination 3,75"

Perfect replacement/Upgrade for the Marshall 1974X or 2061X, replaces D4969 and D5323. 

Mounting: 79x64mm 

Primary:            

      120V      Grey

      110V      Brown

      0V      Blue 

      120V       White

      0V      Black

Secondary:

      290V@120mA      Red

      0V            Green/Yellow

      290V            Red                  

      3,15V@3A      Green

      0V            Green/Yellow

      3,15V            Green      

      6,3V@2A            White

      5V@2A            Orange

      0V            Yellow

PT-Secondary: incl. 5V winding (for Rectifier)

Stack: EI96(3.75 Inch)

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Lay-down for Marshall JTM45 and 50W Plexi models 1986, 1987 series from 1966-69.

Direct replacement for 1202-118. Also used in TAD AMP KIT PLEXI 45 (since 2014).

Lamination size 4 ½"

Mounting on 3 ¾" x 3" 

Does not fit in Marshall JTM45 Reissue, Modell 2245!!! For this purpose please look at MJTM45RP.  

Primary:

      0V      Blue

      120V      Black

      220V      Purple

      230V      Orange

      240V      Yellow 

Secondary:

      345V@300mA      Red

      0V            Black

      345V            Red

      3,15V@7A      Orange

      0V            Brown

      3,15V            Orange

      5V@3A            Yellow

      0V            Yellow

PT-Secondary: incl. 5V winding (for Rectifier)

Transformator Type: MainTransformer

Stack: EI114(4.5 Inch)

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains-Transformer for Marshall 100 W,  JCM900, JCM2000, 2100, 2101, 4100, 4101, 6100, 6101, 9200, DSL100, TSL100, TSL122

Replacement for Dagnall D2105 and T-5826 (TXMA 00061)

Also for Marshall JTM60

Primary: 0V / 117V / 234V

Suitable end-bell see part number TFC-96-S 

TAD CUSTOM MADE! 

Lamination 3 3/4", Stack 2 3/8" 

Mounting is on 79x64mm 

Primary: #700292

   0V      #2

   117V      #5

      0V      #8

      117V      #11 

Secondary:

      360V@430mA      #14

      0V            #16 

      21V@150mA      White

      0V            Black

      21V            White 

      3,15V@8A      #18

      0V            #24

      3,1V            #21

Stack: EI96(3.75 Inch)

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

MAINS for: Marshall® Vintage Modern 2266 and 2266C, 50W, for 230V Operation, number: D5130, incl. end-bell like pictured.

Original Marshall spare part!. 

Primary:            PIN #

      234V      2

      0V      6                              

Secondary:                        

      330V      8

      0V      10

      330V      14                              

      3,15V      Yellow

      0V      Black

      3,15V      White                              

      20V      11

      0V      12

Transformator Type: MainTransformer

Stack: EI96(3.75 Inch)

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

The new TAD matching transformer!

Enables safe, reliable and sound-neutral operation with all amps and cabinets that actually have different impedances in a simple way. For example, it is possible to use the Fender 59 Bassman with 2 Ohm with a 4x12" Marshall cabinet with 16 Ohm. 

All impedance ratios are possible, now also with "crooked" values such as 2.7 and 5.3 ohms.

This means that, for the first time, it is now possible to combine different impedances:

4Ω and 8Ω at the same time: use 2.7Ω tapping.

8Ω and 16Ω: use 5.3Ω tap. 

Perfect also as an accessory for the TAD Silencer to be able to operate different cabs with only one version of the Silencer! 

Custom made for TAD in USA, paper bobbin. 

Fat lamination with 4 ½" > fat tone. Therefore also suitable for bass! 

Built-in transformer for integration into rack systems or patch boxes. 

Dimensions W x H x D: 115mm x 95.5mm x 104mm 

Mounting on 95mm x 78mm 

Black:            0 Ω

White:            2Ω

Blue:            2.7Ω

Yellow:            4Ω

Green:            5.3Ω

Gray:            8Ω

Orange:           16Ω

Stack: EI114(4.5 Inch)

OT-Impedanz: 4+8+16 ohms

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

"Mains transf. for Marshall 100W used since 1971-89"

upright version as used for JCM800 series  Mod. 1959, 1992, 2203, 2210, 4103, 4211 since 1971 till 1989

100W power transformer of the JMP Marshalls like Super Bass, Super Lead Mk II and Master Model 100W Lead Mk 2. 

also used in the auch Silver Jubilee 25th Anniversary 2555 amp. 

Doe NOT fit for the new Marshall 2555X Silver Jubilee Head! 

5,9 Kg 

Custom made for TAD. 

Replacement for Drake DET-4145G, (silver/zinc end bells). 

Lamination: 4 1/2", Stack 2" 

Mounting on: 78mm x 74-84mm (obling hole). 

Dimensions: W x H x D: 96mm x 117mm x 111mm 

Primary:                  

      0V            Orange

      120V            Red

      220V            Grey

      230V            Blue

      240V            Violett 

Secondary:            

      178V@600mA DC      Black  (0.5²)

      0V            Yellow  (0.5²)

      178V            Brown  (0.5²)            

      0V            Green (0.5²)

      100V@100mA      White (0.5²)            

      3,15V@7.5A      Black (1.5²)

      0V            Green (1.5²)

      3,15V            Black (1.5²)

Transformator Type: MainTransformer

Stack: EI114(4.5 Inch)

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains transf. Marshall original for YJM100 and AFD100.

 Original Marshall® MAINS transformer for YJM100 Yngwie Malmsteen, AFD100 Slash.

 Primary for 234V. Comes with shroud.

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

MAINS for: Marshall® Vintage Modern 2466, 100W, for 230V Operation, number: D5127, incl. end-bell like pictured.

Lamination size EI120

Stacking: 70

Primary:                  Pin #

      234V            6

      0V            2                              

Secondary:            

      400V      350mA      9

      0V            10

      400V            11                              

      3,15V      7,5A      12

      0V            13

      3,15V            14

      20,3V      0,5      15

      0V            16

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains-Transformer for Marshall 100 W,  JCM900, JCM2000, 2100, 2101, 4100, 4101, 6100, 6101, 9200, DSL100, TSL100, TSL122

Replacement for Dagnall D2105 and T-5826 (TXMA 00061)

Also for Marshall JTM60

Primary: 0V / 117V / 234V

Suitable end-bell see part number TFC-96-S 

TAD CUSTOM MADE! 

Lamination 3 3/4", Stack 2 3/8" 

Mounting is on 79x64mm 

Primary: #700292

   0V      #2

   117V      #5

      0V      #8

      117V      #11 

Secondary:

      360V@430mA      #14

      0V            #16 

      21V@150mA      White

      0V            Black

      21V            White 

      3,15V@8A      #18

      0V            #24

      3,1V            #21

Stack: EI96(3.75 Inch)