5X PACK BRASS ADAPTER BUSHINGS POTENTIOMETER COVERTS SPLIT SHAFT TO SOLID SHAFT IMPERIAL MEASURES

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Mini toggle switch DPDT ON-ON manufactured by Dailywell Electronics. With this mini switch you can do series/parallel pickup switching, phase switching and humbucker coil tapping on all guitars on the market.

Super bright led diodes ideal for the construction and modification of your effect pedals although they can be used in various projects where you need it. With these LEDs you will not have any problem when you are in the dark, because they will shine bright enough to always know where you have your effects pedal on a stage.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. With a very smooth twist. PDB241 series.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Audio or log taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1 Meg solid shat shaft pot. Audio taper. This pot is ideal for instruments with single coils and humbuckers pickups.

Original Switchcraft brand switch (short size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported. The original Switchcraft amber hood or hood is included.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Finally, a correct mounting screw for P90 pickups. you no longer have to just make do. This screw is made specifically to fit a P90 pickup. 2.8 mm x 32 mm

This American condenser is special because it has an "anti-corona" coating with a wax impregnation that allows the condenser to be much less noisy than a few cents, making this condenser one of the best on the market.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Top-quality potentiometers used on US Fender ® instruments with 3/8 "potentiometer shafts.

Package includes one concentric 250K / 500K audio, split shaft potentiometer. Include mounting hardware.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with single coils of any guitar brand but especially the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

Schaller brand position selector made in Alemania with the best quality on the market. This selector will allow you to have more options with your pickups thanks to the possible combinations that standard position selectors cannot do. Can be used on Strat guitars and the like. Includes screws and trim.

3-way selector made by the Electroswitch company in the United States, famous for its high resistance to use, almost 0% noise and its ease to solder the cables in it. This brand of selector has been around since the early days of the electric guitar and is the best you can find on the market today.

Authentic and genuine Hammond brand boxes with the best quality on the current market. If you want a box that will last for years and years like the first day with Hammond you will have it. This box is adapted to make all kinds of effect pedals and it is very easy to make holes to adapt the potentiometers, switches and LEDs. Four screws are included.

ON DEMAND! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

These are the best quality CTS pots available right now. 

The Treble Bass Expander (TBX) is a 250K / 1Meg stacked, center-topped potentiometer that expands your tonal palette. It works as a standard tone control from 1 to 5, after which the resistance decreases and the bass, treble, presence and output increase. Assembly instructions and accessory installation included.

Authentic and Genuine Sprague Orange Drop PS Series Capacitors Made in America. They are the condensers preferred by technicians around the world who repair vintage amplifiers from brands such as Fender , Ampeg , Magnatone, Marshall , Valco among many other brands. They are also ideal for HI-FI stereos and older radios.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

PRODUCT UNDER ORDER! ESTIMATED DELIVERY TIME: 10-31 DAYS.

Many of Fender's Pure Vintage accessories are handmade whenever possible on the same tooling and machinery as they were originally made. Whether you're customising, modifying or restoring, there's no better way to maintain the heritage and period-correctness of your Fender instrument or amp.

FEATURES

Pure Vintage Brass Telecaster Saddle Set 

Includes octavation springs, slotted head height adjustment screws

Used on early Telecaster and Esquire® from the 50's

Fits most Telecaster bridges; will not fit contemporary six saddle bridges

MADE IN USA.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

Metal roller knobs for Fender Jazzmaster by All Parts. High quality made in USA. Not original!

Pack 2 items.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

Schaller-made trim in Alemania for Gibson and Epiphone pickup selectors from the United States (Switchcraft) and the East. Chromed and painted to resemble ruthenium. They are brand new and unused. They are sold in their original bag.

An integral part of the Delta Tone™ system on Fender American series electric guitars, this 250K "no load" potentiometer functions as a normal tone control from 1 to 9. At 10 o'clock, the tone control is removed from the circuit to increase power and overall tonal response.

Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.

Measures:

3.7cm X 1.7 cm

Similar in function to the Fender "No Load" pot, the Emerson Pro Blender pot is an improvement to this design idea. Our Blender Pot acts as a true bypass when rotated between 9 and 10. The main difference from the "No Load" is that the Emerson Pro Blender pot does NOT have a detent, which means a no click feel between 9 and 10.

Excellent quality monofilament cables with WHITE cotton coating type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Some of our most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

Package contains twelve Phillips pan head (6-32 X 5/8") screws used for mounting pickup selector switches to Fender instruments.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

High quality 9V battery holder for use in various bass and guitar models with active pickups. No screws or clips for battery or battery are included.

Dimensions: 69x41x25mm

Material: ABS

Genuine made in the USA Switchcraft brand jack developed cooperatively from a WD custome design. This jack features a slightly lengthened threaded bushing designed to go through a body with slightly more beef to it. What is really unique is the shorter ground leg which enables you to install it in old SG's and other 60s Gibson s that cannot accept a standard jack which is too long to fit.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K solid shat shaft pot. Audio taper. This pot is ideal for instruments with single coils pickups.

Mini toggle switch DPDT ON-ON. With this mini switch you can do "series / parallel pickup switching", "phase switching" and "humbucker coil tapping" to all the guitars on the market.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...