Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.
These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.
These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.
Brass Sleeves (.250 OD X .238 ID X .375) - Convert Split Shaft Pot to Solid Shaft Potentiometer with American measures ( CTS , Emerson Custom Guitar, Fender , Gibson , Bourns , PEC ...). Pack 5 items.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement coupling sleeve for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement knob for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Set of 4 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Non original button for Gibson, Epiphone and other guitars made in South Korea. This button can only be used on those potentiometers with American measurements (not metric!) from Bourns, CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Excellent value for money.
Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!
Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Knobs not original for Gibson, Epiphone or other brands guitars made in South Korea. This knob can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns, CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)
Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)
Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!
Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.
Set of two reissued buttons of the old ones that used Harmony guitars, old KAY or Philco radios. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem).
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Genuine Fender replacement knob cap for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement knob cap for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Note: The S-1 switch knob / cap requires a coupling sleeve ( Fender p / n 0059278000) to allow the switch to engage.
Genuine Fender replacement knob plus cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Knob manufactured by Rogan in the United States for Rickenbacker guitars since the 50's. Made of bakelite and with a screw to adjust in solid or split shaft potentiometers of imperial measures (6.35mm) such as Bourns, CTS, Emerson Custom, Fender...
Genuine Fender replacement knob plus cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Package includes two knurled knobs (lower and upper). Designed to fit stacked solid shaft potentiometers with set screw mounting design. Mounting set screw not included.
Genuine Fender replacement knob plus cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement accessory kit, includes eggshell-colored tone and volume knobs, pickup covers, tremolo arm tip and switch tip (backplate sold separately).
Introduced on early '50s Stratocaster® guitars and fits most vintage and modern guitars. Pickup covers will not fit N3 Noiseless ™ or SCN ™ pickups.
Genuine Fender replacement knob plus cap for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Telecaster or Precision Bass (US and Mexico) from 1954 to present.
Pack of 3 items (1 knob + 1 cap + coupling sleeve).
Crafted to give your Tele® the aged look and feel of a well-loved original, Road Worn parts are genuine Fender® replacement parts. Designed to the same specifications as their original-era counterparts, and wearing the patina of age, Road Worn parts let you easily customize your guitar with vintage-inspired aesthetics.
Want to change the look of your Stratocaster® without spending a lot of money on a paint job? Try sprucing it up with a Stratocaster Accessory Kit. Everything you need to personalize your Stratocaster.
Includes volume and tone knobs, tremolo arm tip, switch tip, tremolo backplate and pickup covers.
Pickup covers will not fit SCN™, N3™, or Noiseless™ pickups.
Want to change the look of your Stratocaster® without spending a lot of money on a paint job? Try sprucing it up with a Stratocaster Accessory Kit. Everything you need to personalize your Stratocaster.
Includes volume and tone knobs, tremolo arm tip, switch tip, tremolo backplate and pickup covers.
Pickup covers will not fit SCN™, N3™, or Noiseless™ pickups.
Want to change the look of your Stratocaster® without spending a lot of money on a paint job? Try sprucing it up with a Stratocaster Accessory Kit. Everything you need to personalize your Stratocaster.
Includes volume and tone knobs, tremolo arm tip, switch tip, tremolo backplate and pickup covers.
Pickup covers will not fit SCN™, N3™, or Noiseless™ pickups.
Want to change the look of your Stratocaster® without spending a lot of money on a paint job? Try sprucing it up with a Stratocaster Accessory Kit. Everything you need to personalize your Stratocaster.
Includes volume and tone knobs, tremolo arm tip, switch tip, tremolo backplate and pickup covers.
Pickup covers will not fit SCN™, N3™, or Noiseless™ pickups.
From tone and volume knobs to pickup covers and bridges, Vintage Pure knobs and covers allow you to customize your instrument or amp like never before. These original replacement parts are made to the same specifications as Fender made them in their early days, allowing the musician to give any Fender amp, guitar or bass an authentic vintage look and sound.
FEATURES
Authentic Fender accessory kit.
Includes tone and volume knobs, pickup sleeves, tremolo and switch tip (backplate sold separately) in antiqued white.
Used on '59 and '65 American Vintage Stratocaster® '59 and '65.
Fits most classic and modern Stratocaster® guitars.
Pickup covers do not fit Noiseless™ N3 or SCN ™ pickups.
Set of two domed knurled knobs with set screw included for ¼" solid shafts. Fits most Telecaster and Precision Basses made in the USA and Mexico (1951-present). Path Number: 0992056000
Deutsch
Español
English GB