GAVITT 1 Mt AMARILLO GUITAR ELECTRIC 22 AWG VINTAGE CLOTH COVERED WIRE - CABLE INTERNO GUITARRA

5-way selector made by the Electroswitch company in the United States, famous for its high resistance to use, almost 0% noise and its ease to solder the cables in it. This brand of selector has been around since the early days of the electric guitar and is the best you can find on the market today.

New and unused input jack for Gibson , Epiphone and some Telecaster model guitars. They come included with the front, the jack, the washer, the nuts and the four screws to hold them. The front has a slight curve for those guitars that need it.

High quality 9V battery holder for use in various models of electric guitars and basses with active pickups. No battery or battery clips or screws are included.

Dimensions: Approximately 85mm (L) x 32mm (W) x30mm (H)

Material: ABS

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Generic button for use in various models of Marshall brand amplifiers. It is "Push-ON" and only fits in metric potentiometers with base diameter 16mm or 24mm (Japan, Korea, China ...).

Rotary switch BY Alpha Taiwan with 6 Positions and 2 poles. D-Shaft with 1/4 inch, Mounting 3/8 inch, non-shorting, with solder lugs, can be set to 2-5 positions. Perfect replacement for the VOX AC30 Vibrato / Tremolo switch and Orange FAC Switch.

Mallory 150 series axial capacitors are metallized polyester capacitors manufactured to withstand up to 630V and with a 10% more or less tolerance. These brand of capacitors are a favorite of technicians who build and repair old and new amplifiers due to their precise specifications, good sound, and high performance.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

A chrome-plated double-pole 3-way switch, popular in guitars made outside the USA. Fits 2-pickup guitars. Knurled mounting nut, flat washer, and black, chrome and cream plastic knobs are included.

Dimensions:

Overall height is 2 "(50mm)
7/8 '(23.5mm) mounting depth with almost 3/8 "(9mm) threaded section.
Fits 1/2 "mounting hole diameter.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s.

Excellent quality monofilament cables with WHITE cotton coating type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.

Measures:

3.7cm X 1.7 cm

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/8 in.

Length of Shaft 3/8 in.

Made in the USA.

Generic but high quality button for CRL, OAK Gigsby or American made position switches. It is used for Fender Stratocaster guitars and the like.

We offer you 1 meter of self-adhesive copper foil tape of the highest quality and with a width of 30 mm (we also sell 50 mm and ideal aluminum tape for your pickguard or for the pickups. You can see it by clicking on the icon of our store).

High quality potentiometer manufactured by Bourns ideal for Gibson , Epihone or similar guitars. The measurements are the same as the CTS Long Shaft model 450GT.
Measurements:

Total pot depth - 40mm

Length of threaded shaft - 9mm

Shaft diameter - 9.5mm

Base of pot diameter - 23.5mm

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Potentiometer of the Alpha brand mini dual version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Black 3-position switch for Fender Telecaster guitars. The hood is included as shown in the photos.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes.

Excellent quality monofilar cables with BLACK cotton coating type "Vintage" and with a single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals or amps. This brand has been supplying major guitar manufacturers such as Fender , Gibson , Ibanez and many others for many years for their guitars made outside the United States.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

2 Conductor Cable for basses and guitars. # 28 AWG 7/36 TC, PVC insulation, Color Code Black & White, Drain Wire, Black PVC Jacket to a nominal .107 in. OD

MADE IN USA.

Mallory 150M Series condenser ideal for all types of guitars with single coil pickups. This capacitor is the same one you can find in the PRS or Paul Reed Smith.

5 nuts, 5 single washers and 5 lock washers made in the USA for use on various models of jacks and potentiometers of American origin or measurements (CTS, Bourns, PEC...). Ships 15 items as pictured, not valid for metric jacks or potentiometers!

Chrome black three-position selector switch with black button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and the nut are included.

Pickup selector trim for Fender Telecaster guitars black color very similar to those sold by Fender . They are brand new and unused.

ATTENTION: THIS COVER IS VALID FOR THOSE GUITARS THAT USE SELECTORS OF AMERICAN ORIGIN SUCH AS CRL OR OAK (IT IS NOT VALID FOR ORIENTAL SELECTORS). IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Gibson original potentiometer. Made in the USA and engraved with the Gibson logo on the base, this potentiometer will give you the quality and precision your guitar demands. Potentiometer measurements in ohms range from 290K to 305K.

Measurements:

Total pot depth - 40mm

Length of threaded shaft - 9mm

Shaft diameter - 9.5mm

Base of pot diameter - 23.5mm

Authentic and genuine tin from the German brand Mundorf with one of the highest qualities you can find on the market. Ideal for HI-FI equipment, musical instruments, amplifiers ... that require quality welding.

Fender original DPDT Push-Pull potentiometer used in many 70's amps (Presence Pot). Supplied with washer and nut. It is not shipped in its original bag.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

New silicone rings ideal for valves that will prevent vibrations and noise.

Diameter: 30mm

Mini toggle switch DPDT ON-ON manufactured by the Carling brand. With this mini switch you can make "series / parallel pickup switching", "phase switching" and "humbucker coil tapping" to all guitars on the market.

Authentic and genuine Sprague Orange Drop 225P series (polyester) capacitors made in the USA. They are the condensers preferred by technicians around the world who repair vintage amplifiers from brands such as Fender , Ampeg , Magnatone, Marshall , Valco among many other brands.

The K42Y-2 are high quality PIO capacitors made for military. The conductor is made of aluminum foil and the dielectric is oil saturated paper, glass sealed in a metal body. These capacitors provide excellent sonic characteristics, high tolerance is kept within a wide temperature range.

Mini OFF-ON switch with round lever and waterproof white button for use in various guitar projects.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with single coils of any guitar brand but especially the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with single coil pickups of any brand of guitar but especially for Fender . With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED! DON'T PLAY WITH CHEAP COPIES!

4 Conductor Cable for basses and electric guitars. # 28 AWG 7/36 TC, PVC insulation, Color Code Black, White, Green & Red, Drain Wire, Foil Shield (facing in), nominal .020 wall Black PVC Jacket to a nominal .126 in. OD

MADE IN USA.

These are the best quality CTS pots available right now.