On request…

LA15 / Old Workingman 12 - # 0067188000 - 120V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Old Workingman 12 - # 0067195000 - 100V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Baby Blue - # 0067175000 - 100V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

Professional and complete service for all types of vacuum valves. If you wish, you can also send the valves to our office in Madrid. If you decide to use this service, contact us beforehand so we can give you a detailed estimate.

You haven't changed your electrolytic capacitors for 15-20 years? Have you bought a kit and have Chinese capacitors arrived?

The electrolytic capacitors in a tube amplifier, whether new or old, are a fundamental part of its good sound and therefore we offer free estimates for you to change them all at a special price.

On request…

Workingman 12 / CAB - # 0067229000 - 100V / 120V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Workingman 15/2004 - # 0067231000 - 100V / 120V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Workingman 15/2004 - # 0067225000 - 220V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Baby Blue - # 0067176000 - 120V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Workingman 8004 / Power 750 - # 067163000

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Workingman 15/2004 - # 0067224000 - 100V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Interstellar Overdrive - M-TAP - # 0067187000

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Workingman 8004 / Power 750 - # 0067220000

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

Original Marshall ™. Black rocker switch for MG amps. 0.51 "x 0.76" Mounting Hole. DPST.

On request…

Mr. Tone Controls - # 0067194000

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Workingman 10 / LA12 - # 0067222000 - 220V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

LA15 / Old Workingman 12 - # 0067190000 - 240V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Interstellar Overdrive - # 0067186000

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

Workingman 10 / LA12 - # 0067228000 - 100V / 120V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

On request…

LA15 / Old Workingman 12 - # 0067189000 - 220V

ON REQUEST! ESTIMATED DELIVERY OF 3 TO 15 DAYS (SOME MODELS HAVE TO BE MANUFACTURED ON REQUEST!).

Use this to level the final invoice such as forgetting to pay shipping costs or upgrading (from cheap to certified). You can also use it to pay for products on request.

Each "item" equals 0.01 cents. If you need to pay, for example, € 1, you will have to buy 100 items (0.01 X 100 = € 1).

If you are interested in us checking your vacuum valves, you can do it now. The testing service would be done with our two testers: Hickok TV-7D / U and the Orange Valve Tester VT-1000.

With these we can tell you if the valves are new, used or broken. Before visiting our facilities, you will have to tell us which valve models you want us to test.

PRODUCT UNDER ORDER! DELIVERY ESTIMATED BETWEEN 5 TO 25 DAYS.

Screw for Fender Logo 1960-1963, SMA 2x3 / 8 OHP NI. Chrome. Price per piece.

PRODUCT UNDER ORDER! DELIVERY ESTIMATED BETWEEN 5 TO 25 DAYS.

Screw for Fender Logo 1960-1963, SMA 2x3 / 8 OHP NI. Black. Price per piece.

USSR made high quality multipurpose Polyethileneterephtalatic PETP capacitors for amplifier, bass guitar or electric guitar.

Overall dimensions: Ø 10mm × 23mm (without pins).

USSR made high quality multipurpose Polyethileneterephtalatic PETP capacitors for amplifier, bass guitar or electric guitar.

Overall dimensions: Ø 12mm × 22mm (without pins).

This type of resistance (METAL FILM OR METAL FILM RESISTANCE) is the one most commonly manufactured today, with improved noise and stability characteristics compared to carbon and metal oxide resistances.

Very good quality black plastic nut to use in jack of brands such as Cliff UK, Neutrik ... in their solder lugs or PC mount versions. It is not original but it fits perfectly.

Button adapted to the measurements of Switchcraft pickup selectors made in the United States. It does not fit well on Chinese, Korean, Japanese or Mexican guitars that have position switches with metric or "metric" measurements!

If you want an original Switchcraft button visit our store.

RCA 1D7G CV765 Vacuum Valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

TRONIX 0B2 CV1833 Vacuum Valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

TUNG SOL 1T4 vacuum valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

5 M8 nuts to use in various metric jack models (Japan, China, Korea, Indonesia ...).

Cliff UK original black plastic nut for use in jacks from brands such as Fender , Neutrik ... in their solder lugs or PC mount versions.

Cliff UK original white plastic nut for use in jacks from brands such as Fender , Neutrik ... in their solder lugs or PC mount versions.

2.1mm power jack ideal for use in building Boss and non- Boss pedals.

Sold in a pack of 1 unit.

TUNGSRAM PCL805 Vacuum Valve. It is not shipped with its original box.

2.1mm power jack ideal for use in building Boss and non- Boss pedals.

Sold in a pack of 1 unit.

MINIWATT 1L4 DF92 vacuum valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

2.1mm power jack ideal for use in building Boss and non- Boss pedals.

Sold in a pack of 1 unit.

2.1mm power jack ideal for use in building Boss and non- Boss pedals.

Sold in a pack of 1 unit.

This Japanese New OLD STOCK ceramic capacitor will be used to make the treble bleed or "treble bleed" on your PRS guitar.

2 bolts for use in US made pickup selectors such as CRL or OAK Grigsby. They are not the originals of these brands, but they fit perfectly. MADE IN USA.

Condensers of military origin that were used for military equipment of the former Soviet Union. They are made of an aluminum sheet plus the dielectric that is made with wax paper. His tolerance is 10% and they endure high temperatures quite a bit.

JAN RCA 12SG7 VT209 Vacuum Valve with External Oxide. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

Soviet-made military capacitor for use in various electronic projects. In guitars it can be used in single coils as an intermediate value between 0.022uF and 0.033uF.

KEN RAD 12SG7 VT209 vacuum valve with external oxide. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

JAN KEN RAD 12SG7 VT209 vacuum valve with external oxide. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

Soviet-made military capacitor for use in various electronic projects.

JAN KEN RAD 12SG7 VT209 Vacuum Valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

Used vacuum valve MULLARD ECH84. It is sent without its original box.

GENERAL ELECTRIC 12SG7 VT209 vacuum valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

KEN RAD 9002 Vacuum Valves. Tested with a HICKOK TV-7D / U. It is not shipped with its original box.

RCA 12SG7 VT209 Vacuum Valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

RCA 12SG7 VT209 vacuum valve with external oxide. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

RCA 12H6 vacuum valve with external oxide. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

White pickup selector trim for Gibson and Epiphone . They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Pickup selector trim for black Fender Telecascaster guitars. They are brand new and unused.

6-32 x 3/8 in. machine screw, round head. For CRL or OAK Grigsby pickup selector.

Pickup selector trim for black Fender Telecaster guitars. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT OR FENDER MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Used vacuum valve MINIWATT ECH84. It is sent without its original box.

Pickup selector trim for black Fender Stratocaster guitars. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT OR FENDER MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Pickup selector trim for white Fender Stratocaster guitars. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT OR FENDER MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Pickup selector trim for Gibson and Epiphone ivory or cream color. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Pickup Selector Trim for Gibson Black Guitars. They are brand new and unused.

ATTENTION: Cannot be used on Switchcraft brand position switches. If you are looking for a trim of this brand visit our store.

Pickup selector trim for Fender Telecaster guitars white color for use in some pickup selectors of oriental origin (China, Taiwan, Korea and Japan) and for CRL (it is a little loose but is solved by applying tape). They are brand new and unused.

Pickup selector trim for Fender Telecaster guitars cream color for use in some pickup selectors of oriental origin (China, Taiwan, Korea and Japan) and for CRL (it is a little loose but is solved by taping). They are brand new and unused.

V1CT manufactured by TEN in Japan.

Mini OFF-ON switch with round lever for use in various guitar projects.

TEN 3CB6 Vacuum Valves. They have been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

Pickup selector trim for white Fender Telecascaster guitars. They are brand new and unused.

6 X 1 "" PHILLIPS OVAL SMSA NICKEL. This screw is generally used to attach strap buttons to a guitar. It has also been used on occasion to secure both bass and guitar fixed bridges.

Pack of 2 black screws for use in certain models of black or white Switchcraft slide switches.

The K42Y-2 are high quality PIO capacitors made for military. The conductor is made of aluminum foil and the dielectric is oil saturated paper, glass sealed in a metal body. These capacitors provide excellent sonic characteristics, high tolerance is kept within a wide temperature range.

Generic button for use in various models of Marshall brand amplifiers. It is "Push-ON" and only fits in metric potentiometers with base diameter 16mm or 24mm (Japan, Korea, China ...).

Non-original button for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Generic button for use in various models of Marshall brand amplifiers. It is "Push-ON" and only fits in metric potentiometers with base diameter 16mm or 24mm (Japan, Korea, China ...).

Non-original button for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

TEONEX 6AL5 CV4025 5726 Vacuum Valve. Tested with a HICKOK TV-7D / U. It is not shipped with its original box.

GENERAL ELECTRIC EAA91 vacuum valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

USED MINIWATT EAA91 vacuum valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

USED MARCONI EAA91 vacuum valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

RCA 6AL5 vacuum valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

Mini OFF-ON switch with round lever for use in various guitar projects.

Mini toggle switch DPDT ON-ON. With this mini switch you can do "series / parallel pickup switching", "phase switching" and "humbucker coil tapping" to all the guitars on the market.

2 WIMA brand capacitors ideal for your electronic projects.

10 high quality gold plated pickguard, jack plate or back screws for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

Authentic and genuine Zener diodes NXP BZX79-B5V1 for the MXR PHASE 90. Do not play with Chinese copies that do not give the same result.

Sold in pack of 25.

SYLVANIA 6F5 Vacuum Valve. It has been tested with a HICKOK TV-7D / U. It is not shipped with its original box.

Authentic and genuine SCHOTTKY 1N5818 diodes. Do not play it with Chinese copies that do not give the same result.

They are sold in a pack of 10 diodes.

10 high quality chrome pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

10 high quality black pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

5 original Alpha (Taiwan) brand nuts for use in various models of potentiometers with 16mm base.

Fender style holder. Fits most American made amps. Fits 3AG fuses. For 6x30mm fuse.