SCHALLER CHROME STRING TREES GUIDE RETAINER ELECTRIC GUITAR E AND B

Excellent quality single-core cables with 1 meter BLUE AND 1 meter RED color cotton coating, "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

5 original Switchcraft brand nuts to use on various models of their jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric although the pressure washers (Lockwasher) would be missing.

20 high quality gold plated pickguard, jack plate or back screws for Fender Stratocaster, Telecaster and similar guitars.

Measurements: 3X12mm

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Pickup selector trim for black Fender Telecascaster guitars. They are brand new and unused.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of brands.

10 high quality chrome screws and the correct size for Gibson Les Paul Guitar Truss Rods and the like.

Measurements: 2 x 1/4 in.

PRODUCT ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

100% Genuine part for Fender Mustang and Duosonic guitars. DP3T (double-pole / triple-throw), on / on/on switch has eight lugs, four on each pole.

3PDT pushbutton with nine pins to "solder them to the air" for its use in modifications and repairs that demand this type of switches such as effects pedals, wah wah ...

Generic input jack trim manufactured by Partsland in South Korea used for American and Mexican Telecasters from 1952 to the present.

"6-32 X 3/4" "PHILLIPS PAN HEAD NICKEL. This screw is used for height adjustment of single coil US pickups. It will work for many import pickups but some use a very small hole that may have to be opened up. With springs included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Pair of string guides manufactured by Schaller in Alemania for electric guitars. Chrome. They are brand new and unused. They are sold in their original bag. Screws are not included.

For the 3rd string (SOL or G) and 4th string (RE or D)

Authentic and genuine Switchcraft brand model #12B jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

8 X 1-3 / 4 in. PHILLIPS OVAL SMSA NICKEL. These screws are used to secure a bolt on neck to a body. This is the standard length used by Fender ® and it should work for most guitars of comparable construction.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

20 high quality chrome pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measures 3x12mm

Authentic and genuine Switchcraft brand jack model # L11 (jack is slightly longer than model # 11!). Great for use on your Fender guitar or stomp box, although it can be used on amps without any problems. Very hard and resistant and with a quality proven for many years.

Excellent quality single-stranded cables with 1 meter YELLOW and 1 meter WHITE color cotton coating and "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.