SWITCHCRAFT CREAM SWITCH TIP CAP STYLE FOR GIBSON GUITAR PICKUP SELECTOR 3 OR 5 WAY

These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer guitars... to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Excellent quality monofilar cables with BLACK cotton coating type "Vintage" and with a single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

The 2-pole switch can be used in a Varitone notch filter circuit, per Gibson ES-345 guitars. Hardware included. Made by Alpha .

High quality 9V battery holder for use in acoustic guitars. No screws or clips for battery or battery are included.

Dimensions: 55mm (L) x 32mm (W) x23.2mm (H)

Material: ABS

Three-position selector switch in chrome with black button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and nut are included.

This Japanese New OLD STOCK ceramic capacitor will be used to make the treble bleed or "treble bleed" on your PRS guitar.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

Original "L" shaped switch from the Switchcraft brand for Gibson SG and Fender Toronado and Jazzmaster guitars. This article will give you the sound and quality you are looking for for your guitar. Made in the USA. Hood or hood is not included!

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

The 3B3-01 model delivers 6-position Free-Way switching in a Blade format which is directly interchangeable with conventional 3-way selectors.

Set of two reissued buttons of the old ones that used Harmony guitars, old KAY or Philco radios. These buttons only fit perfectly in potentiometers of metric measures or "18 spline pot" (origin Korea, China, Japan ...). They will not fit on American 3/8 "potentiometers!

Screws made in America for use in the back caps of most Boss , Electro-Harmonix and Ibanez brand pedals.

American metric "vintage" style nut (M12) for use in 3-position selector switches for Gibson Les Paul and SG guitars.

Outer dimension 5/8 "- inside dimension 7/16" 1/8 "collar 15 / 32-32 SAE thread. Nickel Finish

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

20 high quality chrome pickguard screws, jack plates or backs for Fender Stratocaster, Telecaster and similar guitars.

Measures 3x12mm

These are the best quality CTS pots available right now. 

Complete "Eric Clapton Setup" kit consisting of:

4 x 500K Audio Short Shaft premium potentiometers (8% Tolerance) from Emerson Custom Guitars .

2 PIO K40Y-9 capacitor of 0.022uF 630V and 0.015uf 400V made in the Soviet Union. Very much like the Bumblebee.

Jack Mono model 11 of the Switchcraft brand.

Premium components for your Gibson guitar.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

PRODUCT UNDER ORDER! ESTIMATED DELIVERY TIME: 10-31 DAYS.

This is a vast improvement over the original Bigsby® OEM bridge, which has no provision for intonation. This bridge is fully intonatable on all six strings and features a unique rocking action, which allows the guitar to stay in tune. This is a must to bring out the best in all Bigsby® tailpieces!

Pickup Selector Trim for Gibson Black Guitars. They are brand new and unused.

ATTENTION: Cannot be used on Switchcraft brand position switches. If you are looking for a trim of this brand visit our store.

Complete deluxe kit for Gibson or Epiphone brand Epiphone

White pickup selector trim for Gibson and Epiphone . They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Pickup selector trim for Gibson and Epiphone ivory or cream color. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Three-position selector switch in chrome with button or cap in ivory or cream and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and nut are included.

Authentic and genuine tin from the German brand Mundorf with one of the highest qualities you can find on the market. Ideal for HI-FI equipment, musical instruments, amplifiers ... that require quality welding.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Excellent quality single-core cables with 1 meter WHITE and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Short screws used to secure a short (bridge position) humbucker mounting ring on to a guitar (Pack 4 units)

Excellent quality monofilament cables with RED cotton coating type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Short screws used to secure a short (neck position) humbucker mounting ring on to a guitar (Pack 4 units)

Trim for your "3 Way Switch" for Gibson and Epiphone brand Epiphone . It comes with a sticker on the back to stick it to the guitar. Black color with gold lettering.

Rubber foot for heavy amplifiers, cabinets, effect pedals, dj's .... With steel insert. Diameter: 38mm. Height: 25mm. Hole diameter: 6.5mm. HIGH QUALITY FROM GERMANY!