3 WAY CHROME TOGGLE SWITCH AND AMBER TIP FOR GIBSON EPIPHONE LES PAUL & SG

Mallory 150M Series condenser ideal for all types of guitars with single coil pickups. This capacitor is the same one you can find in the PRS or Paul Reed Smith.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Pickup Selector Trim for Gibson Black Guitars. They are brand new and unused.

ATTENTION: Cannot be used on Switchcraft brand position switches. If you are looking for a trim of this brand visit our store.

Fender original DPDT Push-Pull potentiometer used in many 70's amps (Presence Pot). Supplied with washer and nut. It is not shipped in its original bag.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

American metric "vintage" style nut (M12) for use in 3-position selector switches for Gibson Les Paul and SG guitars.

Outer dimension 5/8 "- inside dimension 7/16" 1/8 "collar 15 / 32-32 SAE thread. Nickel Finish

Excellent quality single-core cables with 1 meter WHITE and 1 meter BROWN color cotton coating "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s.

Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.

Mallory 150M Series condenser ideal for all types of guitars with humbucker pickups. This capacitor is the same one you can find in the PRS or Paul Reed Smith.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

If you hate that external noises such as power supplies, televisions, fluorescents, radio broadcasts etc ... make your guitar or bass sound terrible and engage annoying sounds, Electrónica Baile offers you the most practical solution to avoid those unwanted noises especially when you play with distortion.

High quality 9V battery holder for use in acoustic guitars. No screws or clips for battery or battery are included.

Dimensions: 55mm (L) x 32mm (W) x23.2mm (H)

Material: ABS

Excellent quality monofilament cable with YELLOW cotton coating "Vintage" type, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or a screen or to make the typical old amp braided cable.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Pickup selector trim for Gibson and Epiphone ivory or cream color. They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Replacement Switchcraft® pickup selector switch. Used on most Gretsch® guitars. Includes mounting hardware. 100% Original Gretsch!

Three-position selector switch in chrome with black button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and nut are included.

Excellent quality single-core cables with 1 meter WHITE and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Three-position selector switch in chrome with white button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and the nut are included.

Button adapted to the measurements of Switchcraft pickup selectors made in the United States. It does not fit well on Chinese, Korean, Japanese or Mexican guitars that have position switches with metric or "metric" measurements!

If you want an original Switchcraft button visit our store.

Original Fender Pure Vintage black 1-10 number skirted amp knobs with silver reflector caps. Fits 1/4 "solid shafts and guitar potentiometers (No Push On!).

Switchcraft 152B jack - Stereo end pin. 15/32 "dia. 1/2" mounting hole. For acoustic and active electronics guitars. Turns on battery when plug is inserted. With nut, washer and the brand Switchcraft serigraphed. MADE IN USA

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. Two nuts and a washer are included.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

LAST UNITS FOR SALE! IT IS THE MOST SEARCHED CAPACITOR BECAUSE THE BEING 400V GIVES A MORE SPECIAL TONE THAN THOSE OF 200, 630 OR 1000 VOLTS. THERE ARE FEW UNITS WORLDWIDE.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

White pickup selector trim for Gibson and Epiphone . They are brand new and unused.

ATTENTION: THIS COVER IS NOT VALID FOR THOSE GUITARS THAT USE SWITCHCRAFT MA RCA SELECTORS. IF YOU WANT ANY OF THIS MA RCA VISIT OUR STORE.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

CAUTION: In some Les pauls, Este potentiometer can be very large!

Gibson original potentiometer. Made in the USA and engraved with the Gibson logo on the base, this potentiometer will give you the quality and precision your guitar demands. Potentiometer measurements in ohms range from 290K to 305K.

Measurements:

Total pot depth - 40mm

Length of threaded shaft - 9mm

Shaft diameter - 9.5mm

Base of pot diameter - 23.5mm

2 Conductor Cable for basses and guitars. # 28 AWG 7/36 TC, PVC insulation, Color Code Black & White, Drain Wire, Black PVC Jacket to a nominal .107 in. OD

MADE IN USA.