ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Reverb drive Transformer, suitable for allmost all Fenders since 1964(= 022921). 

Custom made for TAD in the USA!. 

primary used by all Fender® models with tube reverb from 1963-1990 and Reissue models like:

Fender® Princeton Reverb

Fender® Deluxe Reverb

Fender® Vibrolux Reverb

Fender® Pro Reverb

Fender® Super Reverb

Fender® Twin Reverb

Fender® Quad Reverb

Fender® Super Six Reverb

Fender® Vibrosonic

Fender®`65 Princeton Reverb Reissue

Fender®`65 Deluxe Reverb Reissue

Fender®`64 Custom Deluxe Reverb Amp

Fender®`65 Super Reverb Reissue

Fender®`65 Twin Reverb Reissue

Fender®'65 Twin Custom(TM) 15

Fender® Prosonic 

Replaces also the 037099 of the `63 Vibroverb Reissue

Also suitabel for Mesa Boogie® #550185

For the Fender®`63 Reverb Unit Reissue please order the 004-7605-000

Mounting center:  43mm

ca. 25kOhm to 8 Ohm

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Reverb drive Transformer, suitable for allmost all Fenders since 1964(= 022921). 

Custom made for TAD in the USA!. 

primary used by all Fender® models with tube reverb from 1963-1990 and Reissue models like:

Fender® Princeton Reverb

Fender® Deluxe Reverb

Fender® Vibrolux Reverb

Fender® Pro Reverb

Fender® Super Reverb

Fender® Twin Reverb

Fender® Quad Reverb

Fender® Super Six Reverb

Fender® Vibrosonic

Fender®`65 Princeton Reverb Reissue

Fender®`65 Deluxe Reverb Reissue

Fender®`64 Custom Deluxe Reverb Amp

Fender®`65 Super Reverb Reissue

Fender®`65 Twin Reverb Reissue

Fender®'65 Twin Custom(TM) 15

Fender® Prosonic 

Replaces also the 037099 of the `63 Vibroverb Reissue

Also suitabel for Mesa Boogie® #550185

For the Fender®`63 Reverb Unit Reissue please order the 004-7605-000

Mounting center:  43mm

ca. 25kOhm to 8 Ohm

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Output transformer SE (single ended) 1x6V6, 4Ohms, 5W

for Tweed Champ. 

US-MADE, paper stick bobbin! 

secondary impedance : 4 Ohms

primary impedance: 8.2k Ohm

primary current: max. 35mA

Mounting on: 2" 

W x D x H: 1 11/16" x 1 13/32" x 1 3/8" 

matching recommended speakers:

Jensen P8R, P10R-4, P12R-4, C8R and CH1270-4 

primary:

      HT            blue

      A            red 

secondary:

      0 Ohm            black

      4 Ohm            green

Transformator Type: Output Transformers

OT-Tubes: 6V6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

UPGRADE: OUTPUT TRANSFORMER for Fender Blues Junior, Hot Rod Series, 15W, 4, 8 + 16 Ohms

Upgrade: stacking is 1". 

Impedance ca. 7k p-p 

Primary:            

      A1      Brown

      B+      Red

      A2      Blue            

Secondary:            

      16 Ohm       white

      8 Ohm      green

      4 Ohm      yellow

      0 Ohm      black 

Please swap blue and brown for correct operation!. 

Fits also Fender Musicmaster Bass!

Transformator Type: Output Transformers

Stack: 2.25 Inch

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

2x 6V6GT  , aprox. 18 Watt with 4, 8 and 16 Ohms

traditionally made with authentic materials and paper bobbin. 

Made in USA - vintage correct paper bobbin wound for superior tone!

Exactly made after original specs for the 1957-1959 Fender 5E3 Deluxe amp but with additional 4 + 16 Ohms tabs to allow propper connecting to alternative speaker set-up and various external cabinets. 

NEW: with increased stack (1") for tight and superior bass response. 

Mounting on 3 1/8" 

Overall Dimensions:      W x H x D:            93,5mm x 58mm x 58mm incl.

Zaa ca. 8k Ohm 

Primary:            

      A1      Blue

      B+      Red

      A2      Brown            

Secondary:            

      16 Ohms      Orange

      8 Ohms      Green

      4 Ohms      Yellow

      0 Ohm      Black

Transformator Type: Output Transformers

OT-Tubes: 6V6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

UPGRADE: OUTPUT TRANSFORMER for Fender Blues Junior, Hot Rod Series, 15W, 4, 8 + 16 Ohms

Upgrade: stacking is 1". 

Impedance ca. 7k p-p 

Primary:            

      A1      Brown

      B+      Red

      A2      Blue            

Secondary:            

      16 Ohm       white

      8 Ohm      green

      4 Ohm      yellow

      0 Ohm      black 

Please swap blue and brown for correct operation!. 

Fits also Fender Musicmaster Bass!

Transformator Type: Output Transformers

Stack: 2.25 Inch

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Transf.MAINS for: Fender® Champion 600, NEW VERSION: UPGRADE. 

This transformer does support 6L6 tubes also and has hence a higher current rating.

That delivers a more stable tone, also with the stock 6V6 tube. 

Primary:                  #70005

      0V            White

      230V            Black

      240V            Grey 

Secondary:

      280V@80mA      Red

      0V            Red 

      6,3V@1.5A      Green

      0V            Green

Transformator Type: MainTransformer

Stack: 3 Inch

OT-Tubes: 6V6

Additional winding to 230V (primary): 240V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Grand-Stack version with fatter Stack (1") Increases Punch und Bass! 

2x 6V6GT to 4, 8 Ohms 

Improved Version 

CUSTOM MADE IN USA, Paper bobbin wound! 

Upgrade also for the Fender Deluxe Reverb® Reissue and the 64`Custom Deluxe Reverb® Amp (replaces 004-1318-000; 041318).

We recommend this OT for Fender 65`Princeton Reverb® style amps as well, and the auch passend für den Fender Supersonic 22.

The 125A1A-GS also has considerably more iron compared to the 125A1A (022918; 125A10B; 002-2918-000), but fits most chassis without any problems.

Only an additional 3mm mounting hole has to be drilled. Beyond that, no further modifications are required!

The extra iron gives the sound more power and punch without losing definition and complexity. 

Lamination: 2 5/8"      Stack: 1" 

Primary impedance ca. 6.7kOhm

Mounting on 3,125" 

Primary:

      A1      Blue

      B+      Red

      A2      Brown 

Secondary:

      8 Ohms      Green

      4 Ohms      Yellow

      0 Ohms      Black

Transformator Type: Output Transformers

OT-Tubes: 6V6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Output transformer for: Fender® Tweed Super 5F4, Pro 5E5A, Bandmaster 5E7,   4+8 Ohms , Paper Bobbin, correct impedance.

CUSTOM MADE FOR TAD IN THE USA! 

Can be used also for the 45217 like used in the Fender Vibrolux 6G11 and Bandmaster 6G7-A. 

Overall dimensions:  W x H x D: 102,5 (incl. Lug) x 65,5 x 67 mm. 

Mounting on 90.5mm. 

Lamination: 3", Stacking 1,25" 

Impedance: ca. 6k Ohm P-P

power handling: 40 Watts. 

Primary:            

      A1      Blue

      B+      Red

      A2      Brown            

Secondary:            

      8 Ohms      Yellow

      4 Ohms      Green

      0 Ohms      Black

Transformator Type: Output Transformers

Stack: 3 Inch

OT-Tubes: 6L6

OT-Impedanz: 4+8 ohms

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Output transformer for 2x6L6GC/5881  4 + 8 Ohm / max. 50 Watt

Exact Transformer for Fender blackface and silverface models: Bandmaster, Bandmaster Reverb (fits TFL5005D also), Pro Amp (8 Ohm), Pro Reverb Amp, Vibrolux (8 Ohm), Vibrolux Reverb, Tremolux (all schematic type AA763+AB763+AA1069). Fits also brownface Vibrolux 6G11-A.

Also replaces Fender P/N 036968 + 125A7A / 022848.

Made in USA with vintage correct paper bobbin wound with superior tone!

Primary impedance: 4.2K

Mounting: 90.5mm

Primary                  

      A1            blue

      HT            red

      A2            brown                  

Secondary                  

      0 Ohm            black

      4 Ohm            yellow

      8 Ohm            green

Transformator Type: Output Transformers

OT-Tubes: 6L6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Output transf. for Fender Bassman Ten

2x6L6GC   8   Fender Bassman Ten 

Only for 50W models without Screen taps!

For Fender Bassman Ten 70W models with screen taps please use the 013897 output transformer. 

Lamination: 3", Stack 1 5/8"

Mounting on 64mm x 58mm. 

primary impedance ca. 5.3k 

dimensions: W x H x D: 78mm x 65mm x 87mm 

Custom Made for TAD 

Primary:

      A1      Blue

      HT      Red

      A2      Brown 

Secondary:

      0 Ohm      Black

      8 Ohms      Green

Transformator Type: Output Transformers

Stack: 3 Inch

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Output transformer for: Fender®Blues Deluxe (NOT Reissue !!!) 2x 6L6, 4 und 8 Ohm, 40W. US-Made. 

ca. 4.3k Ohm 

Lamination: 3" 

mounting on 90.5mm 

The Output transformer for the Fender®Blues Deluxe REISSUE can be found at "more matching products and alternatives". 

Primary:            

      A1      Blue

      B+      Red

      A2      Brown            

Secondary:            

      8 Ω      Green

      4 Ω      Yellow

      0 Ω      Black

Transformator Type: Output Transformers

OT-Tubes: 6L6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Transf. Mains for Fender Champ 25 SE and Champ 25. 

Lamination: 3", Stack 2" 

Dimensions: L x W x H: 76mm x 64mm x 93mm

Installation height: 80mm 

Fits Laney AOR30 also!

(increase R75 , R76, filament balance with 2x100R). 

Also perfect for DIY projects up to 25W. Match the chassis K-ACPRV! 

NEW: Comes with top shround and supports all primary voltages of the original! 

Original colors and connection points for 220-240V in brackets:

Primary:                  

      0V            Orange (BLK/RED - CP3)

      120V            Purple (BLK/GRN - CP20)                  

      0V            Grey (BLK/YEL - CP21)

      100V            White (WHT - CP22)

      120V            Black (BLK - CP23)                  

Secondary:

      315V      180mA      Red (CP14)

      0V            Red (CP6)                  

      45V      50mA      Brown (CP7)

      0V            Brown (CP8)                  

      6,3V      2.5 A      Green (CP18)

      0V            Green (CP13)                  

      19V      300mA      Blue (CP16)

      0V            Yellow (CP10)

      19V            Blue (CP17)

Stack: 3 Inch

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Transf. MAINS for: Fender® Roc Pro 700 und 1000, Performer 650 and Performer 1000, Deluxe112, Deluxe112+, Deluxe 90, Deluxe 85, Princeton 65, Princeton 112+, Bassman 60, Export version with thermal protection.

Replaces the 120V transformer 027668 also.

Replaces 028590

Mounting on 2 1/2" x 2"

Primary:

      T.P.*      Purple

      T.P.*      Purple           

      0V            Red

      120V            Green                  

      0V            Yellow

      100V            White

      110V            Grey

      120V            Black                  

secondary                  

      31V            red

      0V            Yellow

      31V            Red 

*: internal thermal protection

Transformator Type: MainTransformer

Stack: 3 Inch

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains Transformer for Fender 65 Deluxe Rev. Reissue and '68 Custom Deluxe Reverb.

Also used in the FENDER FSR '65 DELUXE REVERB PAISLEY. 

Lay-down type with top shroud on genuine lamination size (3 3/4"). 

Mounting on 3-1/8'' x 2-1/2'' 

Replacement for A-041317 (004-1317-000). 

UPGRADE: supports also 6L6 power tubes and 5U4 rectifier! 

Primary:                  

      thermal breaker:      Purple            

      0V            Red

      120V            Green                  

      0V            Yellow

      100V            White

      110V            Grey

      120V            Black                

Secondary:                  

      325V      180mA      Red

      48V            Blue

      0V            Green/Yellow

      325V            Red                  

      6,3V      3.6A      Green

      0V            Green                  

      5V      3A      Yellow

      0V            Yellow

Transformator Type: MainTransformer

Stack: EI96(3.75 Inch)

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains Transf. for Fender Concert II (= 018305). 

Lamination: 3 3/4" Stack: 1 3/4" 

Mounting on 3 1/8" x 2 1/2" 

NEW VERSION WITH SHROUD 

Primary:            #70005      

      0V            White

      220V            Grey

      230V            Black

      240V            Brown 

Secondary:

      0 V            Red

      180 V            Yellow

      360 V@350mA      Red 

      0 V            Brown

      55 V@80mA      Brown 

      0 V            Green

      6,3 V@4.5A      Green

Stack: EI96(3.75 Inch)

Additional winding to 230V (primary): 240V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Transf.MAINS for: Fender® Tweed Deluxe Amp (5E3 etc.). 

NEW VERSION: 2" STACK and C.T. on filament for low noise

supports 6L6GC and GZ34/5AR4 tubes also! 

Lamination: 3 3/8"

Mounting on 70 x 56mm, lay-down. 

Height above chassis: 75mm

W x D x H: 87mm x 70mm x 90mm

weight: aprox. 2.2kg 

Primary:            

      0 V      Black

      230 V      White

      240 V      Grey 

Secondary:

      335 V@ 150mA      Red

      0 V            Green/Yellow  

      335 V            Red   

      5 V@2A            Yellow

      0 V            Yellow

      3.15V@3A      Green

      0V            Green/Yellow

      3.15V            Green 

With a 5Y3WGTB (RT513) and idling current You get about 350V DC of B+, with a GZ34 (RT501)  it is about 390V

PT-Secondary: incl. 5V winding (for Rectifier)

Transformator Type: MainTransformer

Stack: 3.375 Inch

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

The 125P33A (=022749) is the export version and does replace the 110V US-Version 125P23B (=025130) correct size, specs and look! 

Perfect replacement for Blackface Deluxe Reverbs (1963-1967: AB763, AB868) and Blackface Deluxe Amps (1963-1966: AA763)

Fits also Silverface Deluxe Reverbs (1968-1982)

Replacement for 230V of the 7710938000 für 230V in Fender®`64 Custom Deluxe Reverb Amp. 

DOES NOT FIT 65`Deluxe Reverb Reissue and 68`Custom Deluxe Reverb! See 125P33R 

Supports also 6L6 operation in Deluxe Reverbs!. 

Comes without mounting nuts, originals will fit!

Lamination: 3 3/8''  Stack: 2 1/8''

Mounting on: 2 13/16'' x 2 ¼'' 

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Transf.MAINS for: Fender® Tweed Deluxe Amp (5E3 etc.). 

NEW VERSION: 2" STACK and C.T. on filament for low noise

supports 6L6GC and GZ34/5AR4 tubes also! 

Lamination: 3 3/8"

Mounting on 70 x 56mm, lay-down. 

Height above chassis: 75mm

W x D x H: 87mm x 70mm x 90mm

weight: aprox. 2.2kg 

Primary:            

      0 V      Black

      230 V      White

      240 V      Grey 

Secondary:

      335 V@ 150mA      Red

      0 V            Green/Yellow  

      335 V            Red   

      5 V@2A            Yellow

      0 V            Yellow

      3.15V@3A      Green

      0V            Green/Yellow

      3.15V            Green 

With a 5Y3WGTB (RT513) and idling current You get about 350V DC of B+, with a GZ34 (RT501)  it is about 390V

PT-Secondary: incl. 5V winding (for Rectifier)

Transformator Type: MainTransformer

Stack: 3.375 Inch

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

The perfect item for your Fender Twin Reverb Amplifier to tweek to real '65 blackface specs PLUS having the luxury of providing an additional 8 Ohm secondary for being more flexible regaing the speakers connected to your amp.

This transformator is also used in the 100W Fender Showman Reverb, Quad Reverb and Vibrosonic Reverb.

(=022889 + 022897)and PA100 (022889/125A29A)

Does also fit in ´65 Fender® Twin Reverb Reissue (replaces 037612) and the Blackface Single Showman as a replacement for the 125A30A. 

Direct Replacement for Mesa Boogie MK I, MKII. replaces 562100

Also used by Jim Kelly: 4x 6V6 to 8/16 Ohms!

Fits Acoustic 100W Amps also: GT100 etc. replaces 560033 

Impedance ca. 2k

Mounting on 3 7/32" x 2 7/32" 

Made in USA / Paper Stick Wound 

primary   

 A1  blue

 HT  red

 A2  brown   

secondary   

 0 Ohm  black

 4 Ohm  green

 8 Ohm  yellow 

Does not fit Fender Amps with 135W RMS (see speaker output jack) if so please use the 013691 transformer!

Transformator Type: Output Transformers

OT-Tubes: 6L6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Transf.MAINS for: Fender® Custom Vibrolux Reverb, CSR 8 (049180),, export version with all primary voltages like the original, with internal thermal protection. 

lamination: 3 3/4" 

Fits also the Fender®  ´63 Vibroverb Reissue and the Fender® 68` Custom Pro Reverb. 

Does NOT fit the Fender Vibrolux Reverb (AA964, AB568, AA270) Fender Vibrolux Amp (AA763, AB763) Use the 125P26A power transformer for this! 

Primary:                  

thermal fuse: Purple

0V            Red

120V            Green

0V            Yellow

100V            White

110V            Grey

120V            Black             

Secondary                  

      330V      300mA      Red

      0V            Red                  

      40V      100mA      Brown

      0V            Brown                  

      6,3V      4.5A      Green

      0V            Green

Transformator Type: MainTransformer

Stack: EI96(3.75 Inch)

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Our favorite for 2x 6L6GC/5881/7581a/KT66 amps traditonally made on paper bobbin in Illinois, USA. 

Secundary 2, 4 + 8 Ohm, max. 70 Watts

(replaces/upgrades 125A9A, 45249, 022855, 125A13A, 022871). 

Superior tone with paper layer design. 

Perfect upgrade for:

- Fender Bassman '59

- Fender Bassman LDT

- Fender Super Reverb (45W Version AB763 etc.)

- Fender Vibroverb (45W Version AB763 etc.)

- Fender Concert II (Fender 'Rivera' Series 1980er Jahre)

- Fender Hot Rod DeVille (direct replacement for 004-1754-000)

- Fender Blues DeVille  (direct replacement for 004-1754-000) 

The 018343 is used in several TAD Amp Kits like 5F6 Bassman, 5E8 Low Power Twin, BF Super Rev, BF Vibroverb (subject to change). 

Replacement for the 125A13A (022871) für den Fender® Bassman 50, 6G6A, 6G6B, 50W.

Also perfect for Mesa Boogie MK I, MK II, MK III with 60W (562060)

Replaces the 560039 transformer of the Acoustic G60T and Mod 162.

Spare part for the TF125 in the Hughes&Kettner TUBE 50

Primary impedance 4.2k

Lamination: 3 3/4", Stack: 1 1/4"

Mounting on: 3 1/4" x 2"

Overall dimensions: W x H x D: 96mm x 79mm x 80mm

Primary:       

      A1      Blue

      HT      Red

      A2      Brown

Secondary:

      0 Ohm      Black

      2 Ohm      White

      4 Ohm      Yellow/Green

      8 Ohm      Green

Transformator Type: Output Transformers

Stack: EI96(3.75 Inch)

OT-Tubes: 6L6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains transformer for Fender 75, Bassman Ten,  Bassman 70 and all versions of the Bandmaster Reverb, Super Reverb and Pro Reverb with 70/75 Watts power output.

these amp versions do not have a rectifier tube and are made around 1975-1980.

Primary voltages: 220, 230, 240V , replacement for the 120V transformer  013895. 

Lamination: 4 1/8", Stacking: 3 1/4" Lay down style 

NEW IMPROVED VERSION WITH BIGGER STACK FOR BIGGER TONE... 

Comes with top shroud 

Primary:

      0V      White

      220V      Grey

      230V      Black

      240V      Brown 

Secondary:

      190V@420mA      Red

      0V            Yellow

      190V            Red 

      6,3V@4A      Green/Yellow

      0V            Green 

      50V@80mA      Brown

      0V            Brown

Stack: EI105(4.125 Inch)

Additional winding to 230V (primary): 240V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

OUTPUT TRANSFORMER  for 4x 6L6GC  135W  4/8 Ohm UltraLinear Type (with screen grid taps), max. 135W 4/8 Ohm.

UPGRADE for the transformator used in the 1975-1980 built 135W Fender Twin Reverb, Showman Reverb, Quad Reverb, Vibrosonic Reverb and in the Bassman 135.  Also used in the Fender 140. 

Lamination 3 3/4", Stacking: 1 3/4" 

Superior M6 lamination quality. 

Mounting on 70-75mm x 80mm 

Primary:            #70005

      A1      Blue (Blue)

      Tap1      Purple (Blu-Yel)

      HT (B+)      Red (Red)

      Tap2      Yellow (Brn-Yel)

      A2      Brown (Brown) 

Secondary:

      0 Ohm      Black

      4 Ohms      Green/Yellow

      8 Ohms      Yellow 

Colors in brackets denotes original wires.

Transformator Type: Output Transformers

OT-Tubes: 6L6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Power Transformer Original Marshall 50W NOS,  T3560, 110/120V Primary only, slotted lamination, paper wound, Low B+

Unused original condition spare part (NOS). THE REAL DEAL...

Mainly seen in Canadian Marshall 50W Lead Amps (Model 1987) in the early 70´s 

Primary:  Pin#

      0V      2

      110V      1

      120V      6            

Secondary:            

      280V      3

      0V      4

      280V      5            

      3,15V      7

      0V      8

      3,15V      9 

ORIGINAL COLLECTORS ITEM FROM MARSHALL REPAIR SUPPLY STOCKS

EXTREMELY LIMITED SUPPLY!!!

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Output transformer for: Fender® Twin Amp, Bj. 58-60, 4x6L6/5881, 4 Ohm for High Power Tweed Twin, Twin Amp 5F8 - 6G8-A (= 125A4A). 

Custom Made for TAD with high grade M6 laminations. 

Grand Stack =  big tone!!!! Attention: high induction, only to be used with low B+ voltagesd up to 450V! 

Overall dimensions:  W x H x D: B x H x T: 96 x 83 x 117 incl. shrouds. 

Mounting on 78mm x 92-96mm 

Impedance: ca. 2.1k Ohm P-P 

Primary:                  

      A1            Blue

      B+            Red

      A2            Brown                  

Secondary:                  

      4 Ohms            Green

      0 Ohms            Black

Transformator Type: Output Transformers

OT-Tubes: 6L6

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

The 125P33A (=022749) is the export version and does replace the 110V US-Version 125P23B (=025130) correct size, specs and look! 

Perfect replacement for Blackface Deluxe Reverbs (1963-1967: AB763, AB868) and Blackface Deluxe Amps (1963-1966: AA763)

Fits also Silverface Deluxe Reverbs (1968-1982)

Replacement for 230V of the 7710938000 für 230V in Fender®`64 Custom Deluxe Reverb Amp. 

DOES NOT FIT 65`Deluxe Reverb Reissue and 68`Custom Deluxe Reverb! See 125P33R 

Supports also 6L6 operation in Deluxe Reverbs!. 

Comes without mounting nuts, originals will fit!

Lamination: 3 3/8''  Stack: 2 1/8''

Mounting on: 2 13/16'' x 2 ¼'' 

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains transformer for: Fender® Tweed Bassman (5F6-A), Tweed Pro Amp (5E5-A), Tweed Bandmaster (5E7), Tweed Twin (5E8 "Low Power"), Super (5F4, 6G4, 6G4-A). 

Lamination 4 1/8" , Stacking 1 3/4" 

Mounting on 87.5mm x 70mm. 

Dimension: L x W x H: 105mm x 88mm x 100mm 

Primary:                  

      240V            Brown

      230V            Black

      220V            Grey

      0V            White                  

Secondary:                  

      345V@200mA      Red

      52V            Blue

      0V            Green/Yellow

      345V            Red                  

      3,15V@5.5A      Green

      0V            Green/Yellow

      3,15V            Green                  

      5V@6A            Yellow

      0V            Yellow

PT-Secondary: incl. 5V winding (for Rectifier)

Transformator Type: MainTransformer

Stack: EI105(4.125 Inch)

Additional winding to 230V (primary): 240V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains transformer for Fender® Tweed Twin Amp 5F8 "High Power Tweed Twin" + Twin Amp 5E8 "Low Power Twin" with Double 5U4 Rectifier. 

Fits also the Fender 57 Twin-Amp Reissue, replaces 0064603000. 

NEW: supports all primary voltages! 

Lamination: 4 1/2", Stacking 1 1/2", Mounting is on 3" x 3 3/4" 

overall dimension: L x W x H: 114 x 96 x 98mm 

Primary:                  

      0V            Black

      100V            White

      120V            Orange

      220V            Yellow

      230V            Green

      240V            Red                  

Secondary:                  

      320V      380mA      Red

      48V            Blue

      0V            Green/Yellow

      320V            Red                  

      3.15V      6A      Green

      0V            Green/Yellow

      3.15V            Green                  

      5V      6A      Yellow

      0V            Yellow

PT-Secondary: incl. 5V winding (for Rectifier)

Transformator Type: MainTransformer

Stack: EI114(4.5 Inch)

Additional winding to 230V (primary): 110V-120V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

MAINS transformer for: Fender® Hot Rod/Blues Deluxe (PR246)

also used in the Hot Rod Deluxe III (PR1110)  and Blues Deluxe Reissue (PR658) and `68 Custom Vibrolux Reverb. 

Primary 230V, 240V 

Lamination 3 3/4", Stack 2" 

Blues Deluxe:

Primary:                  

      Viol      Thermo      to CP11

      Viol      Thermo      to CP6

      0V      Black      to CP7

      230V      White      to CP25

      240V      Grey      to CP13 

Secondary:                  

      335V      Red to CP14

      0V      Red to CP15                  

      40V      Brown to CP16

      0V      Brown to CP17                  

      6,3V      Green to CP19

      0V      Green to CP20 

Hot Rod Deluxe:

Primary:

      Viol      Thermo      to CP3

      Viol      Thermo      to CP7

      0V      Black      to CP8

      230V      White      to CP4

      240V      Grey      to CP10 

Secondary:

      335V      Red to CP11

      0V      Red to CP12                  

      40V      Brown to CP15

      0V      Brown to CP16                  

      6,3V      Green to CP13

      0V      Green to CP14 

Blues Deluxe Reissue:

Primary:                  

      Viol      Thermo      to P3

      Viol      Thermo      to P5

      0V      Black      to P6

      230V      White      to P4

      240V      Grey      to P9 

Secondary:                  

      335V      Red to P11

      0V      Red to P12                  

      40V      Brown to P15

      0V      Brown to P16                  

      6,3V      Green to P13

      0V      Green to P14

Transformator Type: MainTransformer

Stack: EI96(3.75 Inch)

Additional winding to 230V (primary): 240V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

The 125P34AX (=022764) is the Export-Version and replaces the 110V US-Version 125P34A (=022756).

CUSTOM MADE in U.S.A.

These transformers are made in the USA. Quality, reliability, and excellence are what make our transformers the best around.

This is the perfect mains transformer for all 80W Blackface (AB763) and 100W Silverface Fender Amps like the Fender Twin Reverb, Fender Showman Reverb, Bassman 100, Vibrosonic Reverb but also used for the rare Jim Kelly Amps. 

NOTE: the 135 Watt Twin Reverb / Showman amp models (from mid 1970s to 80s) must use the 013830. 

Also used in the Mesa Boogie MK 1 (NO REISSUE!) and MK 2 Series with NO FAN!. 

For the Mesa Boogie MK 1 REISSUE and MK 2 Series WITH FAN the power transformer 561141 has to be used. 

Does not fit on `65 Fender® Twin Reverb Reissue: see transformer 037611. 

Comes without mounting nuts, originals will fit!

See also HR3121 as mounting nuts 

Lamination: 4 1/2" 

Primary:    

 0V            Black

 220V            Black/Yellow

 230V            Green/Black

 240V            Red/Black

Secondary:    

 340V@380mA      Red

 60V            Red/Blue

 0V            Red/Yellow

 340V            Red    

 3,15V@6A      Green

 0V               Green/Yellow

 3,15V               Green

Stack: EI114(4.5 Inch)

Additional winding to 230V (primary): 240V

ON DEMAND! ESTIMATED DELIVERY FROM 4 TO 31 WORKING DAYS!

Mains transformer for Fender® 135W models: This 013830 is used for all 135 Watt Fender amps of the 1970s: Twin Reverb, Dual-Showman Reverb, Bassman 135, Quad Reverb and Vibrasonic Reverb.

Check the power output marked at the speaker jack at all 135 Watt models. 

Lamiantion: 4 1/2", 

Now with all voltage taps of the original 

Cutout needed : 83mm x 69mm 

Mounting on 95mm x 73mm 

Primary:                  

      0V            Black

      100V            White

      120V            Orange

      127V            Grey

      220V            Yellow

      240V            Green

      260V            Red

Secondary:                  

      185V      600mA      Red

      0V            Yellow

      185V            Red                  

      56V      75mA      Brown

      0V            Brown                  

      6,3V      6A      Green/Yellow

      0V            Green 

NOTE: the earlier 100 Watt-Versions (since 1964- mid 1970s) use the 125P34AX mains transformer.

Transformator Type: MainTransformer

Stack: EI114(4.5 Inch)

Additional winding to 230V (primary): 110V-120V