FENDER CTS DUAL 500K / 250K SPLIT SHAFT POTENTIOMETER 0990847000 450S3868

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Want to get the sound of Tom Morello, Jack White or Buckethead? Well now you have it much easier with this button that you can insert it into your guitar just by making a hole and wiring it according to the diagrams that run on the Internet.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

Mallory 150M Series condenser ideal for all types of guitars with single coil pickups. This capacitor is the same one you can find in the PRS or Paul Reed Smith.

The 5B5-01 model delivers 10-position Free-Way switching in a Blade format with black and white tip which is directly interchangeable with conventional 5-way selectors.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Brass Sleeves (.250 OD X .238 ID X .375) - Convert Split Shaft Pot to Solid Shaft Potentiometer with American measures ( CTS , Emerson Custom Guitar, Fender , Gibson , Bourns , PEC ...). Pack 5 items.

Authentic and genuine tin from the German brand Mundorf with one of the highest qualities you can find on the market. Ideal for HI-FI equipment, musical instruments, amplifiers ... that require quality welding.

Excellent quality single-core cable with 1 meter WHITE and 1 meter BLUE color "Vintage" color cotton coating, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be be used to wire a combo or display or to make the typical old amp braided cable. The diameter is .070 ".

Whether replacing a worn switch or just adding tonal variety to your favorite instrument, Fender® offers high-quality switches with knobs and mounting hardware.

Package includes one white and one black switch tip. Used on most American Standard, American Series, American Special models (US), and Standard and Deluxe Series models (Mexico).

FEATURES

Five-position blade-type selector

Black and white knobs included

Mounting hardware included

Fits most American, American Standard, American Special, Standard and Deluxe Stratocaster series

5-position white switch for Fender Stratocaster and Telecaster guitars. The screws and the hood are included (it is white but has a slight yellow hue) as shown in the photos.

Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Excellent quality single-core cables with 1 meter YELLOW and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

Similar in function to the Fender "No Load" pot, the Emerson Pro Blender pot is an improvement to this design idea. Our Blender Pot acts as a true bypass when rotated between 9 and 10. The main difference from the "No Load" is that the Emerson Pro Blender pot does NOT have a detent, which means a no click feel between 9 and 10.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

The Treble Bass Expander (TBX) is a 250K / 1Meg stacked, center-topped potentiometer that expands your tonal palette. It works as a standard tone control from 1 to 5, after which the resistance decreases and the bass, treble, presence and output increase. Assembly instructions and accessory installation included.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Mallory 150M Series condenser ideal for all types of guitars with humbucker pickups. This capacitor is the same one you can find in the PRS or Paul Reed Smith.

"6-32 X 3/4" "PHILLIPS PAN HEAD NICKEL. This screw is used for height adjustment of single coil US pickups. It will work for many import pickups but some use a very small hole that may have to be opened up. With springs included.

4 Conductor Cable for basses and electric guitars. # 28 AWG 7/36 TC, PVC insulation, Color Code Black, White, Green & Red, Drain Wire, Foil Shield (facing in), nominal .020 wall Black PVC Jacket to a nominal .126 in. OD

MADE IN USA.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Mini toggle switch DPDT ON-ON. With this mini switch you can do "series / parallel pickup switching", "phase switching" and "humbucker coil tapping" to all the guitars on the market.

Authentic and genuine Switchcraft brand model # 12B jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

Want to get the sound of Tom Morello, Jack White or Buckethead? Well, now you have it much easier with this button that you can insert into your guitar just by making a hole and wiring it.

Mallory 150 M Series capacitors are made of metallized polyester film with only 10% tolerance. They are the condensers preferred by technicians around the world for their quality, performance and pure "vintage" sound. They are ideal for repairs, upgrades, or new projects on guitar or audio amplifiers.

Three-position selector switch in chrome with white button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and the nut are included.

PRODUCT ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

100% Genuine part for Fender Mustang and Duosonic guitars. DP3T (double-pole / triple-throw), on / on/on switch has eight lugs, four on each pole.

Excellent quality single-wire cables with cotton coating of color 1 meter BLUE and 1 meter BLACK type "Vintage" and with a single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Mini OFF-ON switch with round lever for use in various guitar projects.

PRODUCT UNDER ORDER! DELIVERY ESTIMATED BETWEEN 5 TO 25 DAYS

111x60x32mm. Hammond item code HA27134PSLA.

Die cast aluminum

Made by Hammond / Eddystone.

Mini toggle switch DPDT ON-ON manufactured by Dailywell Electronics. With this mini switch you can do series/parallel pickup switching, phase switching and humbucker coil tapping on all guitars on the market.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with single coils of any guitar brand but especially the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers.