Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.
These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.
These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.
These have a 50k ohm audio taper and are a full size pot. They are used in some ancient vintage guitar circuits but primarily in active electronic circuits. 24 MM DIA., 3 / 8-32 threaded bushing, 24 spline, 20% tolerance, 3/8 "bushing height 3/8" shaft length.
Brass Sleeves (.250 OD X .238 ID X .375) - Convert Split Shaft Pot to Solid Shaft Potentiometer with American measures ( CTS , Emerson Custom Guitar, Fender , Gibson , Bourns , PEC ...). Pack 5 items.
These have a 50k ohm linear taper and are a full size pot. They are used in some ancient vintage guitar circuits but primarily in active electronic circuits. 24 MM DIA., 3 / 8-32 threaded bushing, 24 spline, 20% tolerance, 3/8 "bushing height 3/8" shaft length.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement coupling sleeve for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement knob for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Genuine Fender replacement knob cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Set of 4 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
This genuine Fender thin aluminum shielding requires no additional wiring. It fits on the underside of your Stratocaster pickguard and helps with noise-cancellation during play.
Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!
Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!
Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)
Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)
Original Fender brand potentiometer (part number 0021682049) manufactured by CTS . This potentiometer is used for tone control in Eric Clapton's mod kits. It is shipped in its original bag. Washer and nut not included.
Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.
Set of two reissued buttons of the old ones that used Harmony guitars, old KAY or Philco radios. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem).
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.
Genuine Fender replacement knob cap for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Original Fender 1M linear mini potentiometer (B1M) manufactured by CTS for American Vintage '62 Jazzmaster guitars (United States) and Classic Player Series models from 1998 to present (Mexico) and Jazzmaster and Jaguar from 1998 to present. 3/8 "shaft diameter. 5/16" diameter bushing.
Fender Genuine 375K Smooth Stem Potentiometer Made by Alpha for Telecaster Hot Rod Guitars. They are not shipped in their original bag. With a washer and a nut.
Genuine Fender replacement knob cap for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Note: The S-1 switch knob / cap requires a coupling sleeve ( Fender p / n 0059278000) to allow the switch to engage.
Genuine Fender replacement knob plus cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
An integral part of the Delta Tone™ system on Fender American series electric guitars, this 250K "no load" potentiometer functions as a normal tone control from 1 to 9. At 10 o'clock, the tone control is removed from the circuit to increase power and overall tonal response.
Genuine Fender replacement knob plus cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
Package includes two knurled knobs (lower and upper). Designed to fit stacked solid shaft potentiometers with set screw mounting design. Mounting set screw not included.
Original Fender 50K linear mini potentiometer (B50K) manufactured by CTS for American Vintage '62 Jazzmaster guitars (United States) and Classic Player Series models from 1998 to present (Mexico). 1/8 "solid shaft. 5/16" diameter bushing.
Original Fender potentiometer made by CTS for various vintage or NOS guitars and basses: 55 and 59 NOS CS Precision Bass, Antigua Strat, Blue Flower Strat, Paisley Strat, 69 Strat NOS CS, Stu Hamm Urge II Bass, American Deluxe Jazz Bass and American Deluxe Precision Bass, Washer and nut not included. It is shipped in its original bag.
Original Fender 100K mini potentiometer (B100K) manufactured by CTS for Fender Jaguar guitars. 3/8 "shaft diameter. 5/16" diameter bushing. Model Number: 0097025000
Genuine Fender replacement knob plus cap for S-1 switch. Fits 1/4 "split shaft controls. The S-1 switch can be retrofitted to nearly any Stratocaster (US and Mexico) produced from 1954-Present.
"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.
Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.
3/8 "solid shaft 100KB" stacked "dual concentric mini-pot used to adjust the high and low frequencies on most Deluxe Series Basses. Includes mounting washer and nut. Mini design with six solder leads (3 for each level of control).
Used in most Deluxe Series (US and Mexico) basses. Made in Japan. With her original bag.
Genuine Fender replacement knob plus cap for S-1 switch long shaft. Fits 1/4 "solid shaft controls. The S-1 switch can be retrofitted to nearly any Telecaster or Precision Bass (US and Mexico) from 1954 to present.
Pack of 3 items (1 knob + 1 cap + coupling sleeve).
The Treble Bass Expander (TBX) is a 250K / 1Meg stacked, center-topped potentiometer that expands your tonal palette. It works as a standard tone control from 1 to 5, after which the resistance decreases and the bass, treble, presence and output increase. Assembly instructions and accessory installation included.
Crafted to give your Tele® the aged look and feel of a well-loved original, Road Worn parts are genuine Fender® replacement parts. Designed to the same specifications as their original-era counterparts, and wearing the patina of age, Road Worn parts let you easily customize your guitar with vintage-inspired aesthetics.
"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.
Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.
"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.
Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.
"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.
Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.
"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.
Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.
Kit includes main PCB board, TBX tone potentiometer, volume and tone, output jack, capacitor and 1/4 watt resistor, mounting hardware, wiring diagram and setup instructions.
Deutsch
Español
English GB