Very high quality ideal replacement for Fender channel switching units or HI-FI. 1 unit

7-pin jack for use in various models of the Boss brand in its input or output. It is not an original part but it fits very well inside the pedal.

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

Authentic and genuine Switchcraft brand jack model # L11 (jack is slightly longer than model # 11!). Great for use on your Fender guitar or stomp box, although it can be used on amps without any problems. Very hard and resistant and with a quality proven for many years.

Input jack for basses or guitars and effect pedals. 2 pins T / S, open circuit, non-switched, nylon bushing for ground isolation. Nut and washer included. Made in USA.

Authentic and genuine Switchcraft brand model #12B jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

This is the RCA plug used on vintage Fender amps for footswitch and reverb in / out connections. For cable up to 0.125’ (3.18mm) diameter.

Authentic and genuine Switchcraft brand model #12A jacks. Great to use on your guitar, your effects pedals although it can be used without problems in amplifiers. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Authentic and genuine Switchcraft brand model # L12A jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years.

Swithcraft original jack model 113X made in the USA. Special for effect pedals.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

High quality Japanese made ¼” mono jack similar to those found in many Boss pedals. This jack has two solder lugs. One for the tip and one for the sleeve. This style of jack has been widely used across the industry and can also be found in many Roland items. Includes nut and washer.

Body Height 16 mm

Body Length 19 mm

Body Width 16 mm

Bushing Length 7.5 mm

Bushing Threading M9x0.75

Insertion And Extraction Force 0.5~4.0 kgs

Life Test 5000 Cycles

Max. Contact Resistance 50 mΩ

Min. Insulation Resistance 100 MΩ at 500VDC

Overall Length 33.5 mm

Withstanding Voltage 500 VAC for 1 Minute

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

High quality Japanese made ¼” stereo jack similar to those found in many Boss pedals. This jack has three solder lugs. One for the tip, one for the ring, and one for the sleeve. This style of jack has been widely used across the industry and can also be found in many Roland items. Includes nut and washer.

Body Height 16 mm

Body Length 19 mm

Body Width 16 mm

Bushing Length 7.5 mm

Bushing Threading M9x0.75

Insertion And Extraction Force 0.5~4.0 kgs

Life Test 5000 Cycles

Max. Contact Resistance 50 mΩ

Min. Insulation Resistance 100 MΩ at 500VDC

Overall Length 33.5 mm

Withstanding Voltage 500 VAC for 1 Minute

ON REQUEST! ESTIMATED DELIVERY 5-31 WORKING DAYS!

Ibanez 8JKC3003 DC Jack for TS808.

ON REQUEST! ESTIMATED DELIVERY 5-31 WORKING DAYS!

Ibanez 8JKC3003 DC Jack for TS808 35th Anniversary.

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Authentic and genuine angled jacks of the Switchcraft brand model # 228. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. They come silk-screened with the manufacturer's brand and everything that is seen in the photo is included.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

ON REQUEST! ESTIMATED DELIVERY 5-31 WORKING DAYS!

Ibanez 8JKC3001 Input, Output Jack for Ibanez 9-series, 808-series and 80835(DX+B).

ON REQUEST. DELIVERY IN 4-7 DAYS.

Fender Deluxe Series cables carry the highest quality materials and braided shielding to deliver flagship durability, conductance and transparency. Our top-of-the-line cables sport custom molded ends with strain relief under the housing — plus 24K gold-plated connectors that won't tarnish or degrade your sound over time.

ON REQUEST. DELIVERY IN 4-7 DAYS.

Fender Deluxe Series cables carry the highest quality materials and braided shielding to deliver flagship durability, conductance and transparency. Our top-of-the-line cables sport custom molded ends with strain relief under the housing — plus 24K gold-plated connectors that won't tarnish or degrade your sound over time.