CTS 500K REVERSE LOG AUDIO TAPER - LEFT HAND! POT POTENTIOMETER SPLIT SHAFT

These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer guitars... to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/8 in.

Length of Shaft 3/8 in.

Made in the USA.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

OAK 6 way switch for Fender Stratocaster.

PLEASE NOTE: While this switch uses the same mounting hole locations as a standard 5 way switch used on a USA Fender Stratocaster the switch slot will need to be lengthened equally on either end in order for the longer throw of the switch to engage the outer positions .

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of brands.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

Brass Sleeves (.250 OD X .238 ID X .375) - Convert Split Shaft Pot to Solid Shaft Potentiometer with American measures ( CTS , Emerson Custom Guitar, Fender , Gibson , Bourns , PEC ...). Pack 3 items.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

100% Genuine part for Fender Brian May, Jazzmaster, Jaguar guitars. DPDT (double-pole / double-throw), on / on switch has six lugs, three on each pole.

5 original Switchcraft brand nuts, 5 plain washers and 5 lock washers to use on various models of your jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric. 15 items are sent as they appear in the photo.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!

Original Switchcraft brand switch (short size) for Gibson and Epiphone . This article will give you the sound and quality you are looking for for your guitar. Made in the United States and imported. The original Switchcraft white hood or hood is included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Pot Alpha for controlling one pickup or source to another, with both signals full at the center detent. Split shaft.

Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...

Set of two reissued buttons of the old ones that used Harmony guitars, old KAY or Philco radios. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem).

The 2-pole switch can be used in a Varitone notch filter circuit, per Gibson ES-345 guitars. Hardware included. Made by Alpha .

Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.

Valve manufactured by New Sensor in Russia (like Mullard ). This 12AX7 is very similar in characteristics to the Mullard 12AX7 with low noise, excellent tonal and harmonic response. Guaranteed results from the first moment!

Before the vacuum valves are shipped, they are tested with an Orange Valve Tester VT-1000!

Set of 4 non-original buttons for left-handed guitars Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.