EMERSON PRO CTS 500K 8% TOLERANCE AUDIO TAPER SPLIT SHAFT POTENTIOMETER
Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.
Emerson PRO CTS - 500K Short (3/8 ") Split Shaft Potentiometer
- 1/4 "split shaft for fine-knurled (24-spline) US Spec knobs.
- Typically used on SG's, Flat Top Non Carved Top Les Pauls, PRS's, LP Jr's and many other models of guitars, but can be used on any guitar that requires a 500K Split Shaft Potentiometer.
Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed our stated tolerances. We take great pride in offering some of the best, most consistent potentiometers on the market today. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the way — no abrupt flattening to choke your playing style. Clarity and Precision defines this Series of Premium Potentiometers by Emerson Custom.
Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity.
Shaft Style: (24 Spline) Split Shaft, Fine Knurling
Shaft Diameter: 0.250 ”(6.35MM)
Shaft Height: 3/8 ”(9.52MM)
Thread: 3/8 ”X 32
Thread Height: 3/8 ”(9.52MM)
Required Mounting Hole: 3/8 ”(9.52MM)
WE ARE I NTE RNATIONAL DEALER OF EMERSON CUSTOM GUITARS!
Customers who bought this product also bought:
3-way selector made by the Electroswitch company in the United States, famous for its high resistance to use, almost 0% noise and its ease to solder the cables in it. This brand of selector has been around since the early days of the electric guitar and is the best you can find on the market today.
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
Excellent quality single-core cables with 1 meter WHITE and 1 meter BROWN color cotton coating "Vintage" type and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.
Three-position selector switch in chrome with black button or cap and made of plastic. This selector is very popular on Gibson or Epiphone made outside of the United States. The washer and nut are included.
These two capacitors are ideal for use on your Gibson Les Paul, SG, Explorer ... guitar to achieve Eric Clapton's famous "WOMAN TONE" sound. For very little money, imitate the sound of your idols!
Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with humbucking pickups but especially for the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers. MADE IN USA! 100% GUARANTEED!
Excellent quality single-core cables with cotton coating of 1 meter YELLOW and 1 meter RED type "Vintage" and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.
Authentic and genuine Sprague Orange Drop 225P series (polyester) capacitors made in the USA. They are the condensers preferred by technicians around the world who repair vintage amplifiers from brands such as Fender , Ampeg , Magnatone, Marshall , Valco among many other brands. Ideal for basses and guitars.
Capacitors of military origin that were used for military equipment of the former Soviet Union and that were rediscovered as one of the best capacitors for audio thanks to its good finish, its very precise specifications and its properties when used in guitars, basses, amplifiers of recognized brands, Danny Gatton, HI-FI equipment etc ...
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!
Excellent quality single-core cable with BROWN cotton coating "Vintage" type, for wiring any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker ... The cable can also be used to wire a combo or a screen or to make the typical old amp braided cable. The diameter is .070 ".
The best kit to avoid losing treble when lowering the volume of your guitar, especially on humbucking pickups! This kit is comprised of US-made premium grade electronics (NOS): a 0.001uF Sprague Orange Drop capacitor and a 130k 1 / 2W Allen Bradley resistor.
2 bolts for use in US made pickup selectors such as CRL or OAK Grigsby. They are not the originals of these brands, but they fit perfectly. MADE IN USA.
Short screws used to secure a short (neck position) humbucker mounting ring on to a guitar (Pack 4 units)
Pack of three meters of cable (one meter of each color) to use in all Gibson and Epiphone brand Epiphone ! Made in America since the 1950s!