Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.

These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.

These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.

Brass Sleeves (.250 OD X .238 ID X .375) - Convert Split Shaft Pot to Solid Shaft Potentiometer with American measures ( CTS , Emerson Custom Guitar, Fender , Gibson , Bourns , PEC ...). Pack 5 items.

5 original Switchcraft brand nuts to use on various models of their jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric although the pressure washers (Lockwasher) would be missing.

Measurements:

Total length - 26mm

Screw-in shaft length - 6mm

Total shaft length - 16mm

Base diameter - 23.5mm

5 original Switchcraft brand nuts, 5 plain washers and 5 lock washers to use on various models of your jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric. 15 items are sent as they appear in the photo.

Potentiometer manufactured by CTS in the United States, ideal for types of basses and guitars on the market (if your guitar is from outside the United States you will have to file the pickguard or the wood so that the shaft can fit since its diameter is American metric).

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Pack of 2 items.

Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Pack of 2 items.

Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 100k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 100k solid shaft pot. Audio or log taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1 Meg solid shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Set of 4 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

C50K solid shaft pot. Reverse audio taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment on a pickguard or control plate. 450S3992

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Non original button for Gibson, Epiphone and other guitars made in South Korea. This button can only be used on those potentiometers with American measurements (not metric!) from Bourns, CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Excellent value for money.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k solid shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

This genuine Fender thin aluminum shielding requires no additional wiring. It fits on the underside of your Stratocaster pickguard and helps with noise-cancellation during play.

Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!

Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1 Meg solid shat shaft pot. Audio taper. This pot is ideal for instruments with single coils and humbuckers pickups.

Genuine Pot by CTS used in Vintage Style Fender Amps. 10k Linear with washer and nut and without original bag.

Fender part # 0017502000

CTS pots with a shorter ¼ ”bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Audio or log taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1M split shaft pot. Audio  taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)

Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K solid shat shaft pot. Audio taper. This pot is ideal for instruments with single coils pickups.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shat shaft pot. Linear taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment on a pickguard or control plate.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k solid shat shaft pot. Log or audio taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment on a pickguard or control plate.

Original Fender brand potentiometer (part number 0021682049) manufactured by CTS . This potentiometer is used for tone control in Eric Clapton's mod kits. It is shipped in its original bag. Washer and nut not included.

Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.

Potentiometer for controlling the volume or tone of active pickups, or for use after the preamp of a piezo-saddle electric guitar bridge. Made by CTS in USA for TAD Tube Amp Doctor. Each CTS pot includes a lock washer and one hex mounting nuts.

Body Diameter: 24 mm

Power Rating ⅓ watt

Bushing Diameter: ⅜" (Threading: 3/8-32)

Bushing Length: ¼"

Shaft Diameter: ¼"

Shaft Length: ⅜"

Shaft Material: Aluminum - Solid Shaft

Set of two reissued buttons of the old ones that used Harmony guitars, old KAY or Philco radios. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem).

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone 300k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone 1Meg split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Original Fender buttons for Stratocaster model guitars. Path Number: 0992035000

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

Original Fender buttons for Stratocaster model guitars. Path Number: 0991369000

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

Replacement knob set for the most common concentric stacked potentiometers like Fender or Alpha Taiwan. Very High Quality made in South Korea.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1Meg split shaft pot. Audio taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Original Fender buttons for Stratocaster model guitars. Path Number: 0991365000

Original Fender 100k linear taper mini potentiometer. 1/4 "solid shaft with center detent. It is sent in its original bag.

The best potentiometer made by CTS for guitars is here in España ! Its 550k of resistance and with only 9% tolerance will mean that you never have a potentiometer that goes below 500k and does not go above 599K. In addition, it narrowly exceeds the quality of the CTS 450 series that we sell in our online store. If you are looking for precision and quality for your guitar, buy them!

The best potentiometer made by CTS for guitars is already here in España ! Its minimum resistance 500k and with only 9% tolerance will never have a potentiometer that goes below 500k and does not rise above 550K.

Original Fender buttons for Stratocaster model guitars. Path Number: 0991369000

Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs

Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.

Measures:

3.7cm X 1.7 cm

The best potentiometer made by CTS for guitars is here in España ! Its 550k of resistance and with only 9% tolerance will mean that you never have a potentiometer that goes below 500k and that it does not go above 599K. In addition, it narrowly exceeds the quality of the CTS 450 series that we sell in our online store. If you are looking for precision and quality for your guitar, buy them!

Original Fender 50K linear mini potentiometer (B50K) manufactured by CTS for American Vintage '62 Jazzmaster guitars (United States) and Classic Player Series models from 1998 to present (Mexico). 1/8 "solid shaft. 5/16" diameter bushing.

Original Fender potentiometer made by CTS for various vintage or NOS guitars and basses: 55 and 59 NOS CS Precision Bass, Antigua Strat, Blue Flower Strat, Paisley Strat, 69 Strat NOS CS, Stu Hamm Urge II Bass, American Deluxe Jazz Bass and American Deluxe Precision Bass, Washer and nut not included. It is shipped in its original bag.

ON DEMAND! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1M split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Original Fender buttons for their Jaguar, Mustang and Mustang electric bass models. Path Number: 0019455049

ON REQUEST! ESTIMATED DELIVERY 7 TO 31 WORKING DAYS!

Guitar volume and tone pot CTS Premium 300k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.

Measures:

3.7cm X 1.7 cm

Two potentiometers in one for you Fender Jazz Bass reissue or Telecaster designed by CTS ! Stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. ATTENTION! the top / volume section is 500K and the bottom / tone section is 250K

3/8 "mounting hole. Top shaft is 3/16" (4.75mm) diameter and bottom shaft is 17/64 "(6.75mm) diameter.

Original Fender brand buttons for Jazz Bass. Path Number: 0991370000

Original Fender potentiometer for your TBX. 1 Mega linear plus 250K logarithmic. P / N: 0021686000

Dimensions:

6mm split shaft with 3/8 "X 3/8" bushing

Guitar volume and tone pot - the top-of-the-range CTS Premium 25K split shaft pot. Log taper. This pot is ideal for instruments with active pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Two potentiometers in one for you Fender Jazz Bass or Telecaster designed by CTS ! Stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. ATTENTION! the top / volume section is 500K and the bottom / tone section is 500K