Very good quality black plastic nut to use in jack of brands such as Cliff UK, Neutrik ... in their solder lugs or PC mount versions. It is not original but it fits perfectly.

Cliff UK original black plastic nut for use in jacks from brands such as Fender , Neutrik ... in their solder lugs or PC mount versions.

Cliff UK original white plastic nut for use in jacks from brands such as Fender , Neutrik ... in their solder lugs or PC mount versions.

Pack of 3 protection caps for Cliff UK jacks or other manufacturers. They prevent the entry of dust. Easy to place.

Original connector model 3501FPX manufactured by Switchcraft. This female jack is the original that the Fender Champ and Bassman .

6.3mm. horizontal jack.

With extra long contacts, distance to PCB 12.5mm. Mono.

Very high quality ideal replacement for Fender channel switching units or HI-FI. 1 unit

6.3mm. horizontal jack.

With extra long contacts, distance to PCB 12.5mm. Mono.

6.3mm. horizontal jack.

With extra long contacts, distance to PCB 15mm. Mono.

6.3mm. horizontal jack.

With extra long contacts, distance to PCB 15mm. Stereo.

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is mono and is ideal for modern amplifiers from Marshall or the JCM900, although they can be used in other brands such as Fender , Ampeg , Crate, GK ...

The plastic nut is included and has four pins for soldering.

REJECT IMITATIONS!

Authentic and genuine Switchcraft brand model # 11 jacks. Great for use on your Fender guitar or effect pedals, but can be used on amps without any problems. Very hard and resistant and with a quality proven for many years. Inside the jack, the manufacturer's brand is screen-printed and the washer and its corresponding nut are included.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Oval Rubber Grommet for Boss Pedals.

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is stereo and is ideal for Marshall Fender , Ampeg , Crate, GK amplifiers ...

The nut is included and has six soldering pins.

REJECT IMITATIONS!

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is mono and is ideal for modern amplifiers from Marshall or the JCM900, although they can be used in other brands such as Fender , Ampeg , Crate, GK ...

The plastic nut is included and has four pins for soldering.

REJECT IMITATIONS!

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is mono and with an "L" shaped pin format ideal for Marshall JCM900 although it can be used in other brands such as Fender , Ampeg , Crate, GK ...

The nut is included and has four pins for soldering.

REJECT IMITATIONS!

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is stereo and is ideal for Marshall Fender , Ampeg , Crate, GK amplifiers ...

The nut is included and has six soldering pins.

REJECT IMITATIONS!

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is mono and is ideal for modern amplifiers from Marshall or the JCM900, although they can be used in other brands such as Fender , Ampeg , Crate, GK ...

The plastic nut is included and has four pins for soldering.

Original jack manufactured by Cliff in the UK. The connectors of this brand are world famous for their high quality and in this case, this one is mono and with an "L" shaped pin format ideal for Marshall JCM900 although it can be used in other brands such as Fender, Ampeg, Crate, GK...

Original Jack made by the Cliff brand in the UK VINTAGE STYLE. The connectors of this brand are world famous for their high quality and in this case, this is mono and is ideal for modern amplifiers from Marshall or the JCM900, although they can be used in other brands such as Fender , Ampeg , Crate, GK ...

Original Jack made by the Cliff brand in the UK VINTAGE STYLE. The connectors of this brand are world famous for their high quality and in this case, this is mono and is ideal for modern amplifiers from Marshall or the JCM900, although they can be used in other brands such as Fender , Ampeg , Crate, GK ...

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

This is the RCA plug used on vintage Fender amps for footswitch and reverb in / out connections. For cable up to 0.125’ (3.18mm) diameter.

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is stereo and is ideal for Marshall Fender , Ampeg , Crate, GK amplifiers ...

The metal nut is included and has six soldering pins.

REJECT IMITATIONS!

Fender replacement cable for reverb units, model 0056931049, 48 inches in length with a RCA angle ends. Sometimes if a reverb unit "isn't working" it may just be corrosion on the connections or a problem with the connections on the cable.

Common input jack in Ampeg , Crate, Nord and in some solid state products from Fender during the early 1980s. Nut and washer included. Manufactured by Swithcraft in USA.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is stereo and is ideal for Marshall Fender , Ampeg , Crate, GK amplifiers ...

The nut is included and has six soldering pins.

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Original Jack made by the Cliff brand in the UK. The connectors of this brand are world famous for their high quality and in this case, this is mono and is ideal for Marshall Fender , Ampeg , Crate, GK amplifiers ...

The nut is included and has six soldering pins.

REJECT IMITATIONS!

Stereo jack for Peavey brand with high definition (High Definition or HID). Washer and nut included.

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

Mono input jack for Peavey Valveking amplifiers, nut and washer not included!

Original R / A Mono Jack for use in Fender amps manufactured from 1999 to present. Nut and washer not included. Bushing Length = 0.34 "

It is shipped in its original bag.

Path Number: 0051658049

Used on Acoustasonic™ Jr/Pro/30/SFX II, Bassman® 25/60/200/300/1200, Bassman® 800 PRO, Ultimate Chorus, Cyber-Twin®, Cyber Deluxe, Bullet 15 DSP, Princeton® 65 DSP/650, Deluxe™ 90 DSP/900, Stage™ 100/160 DSP, Stage™ 1000/1600, Hot Rod Deluxe™/DeVille™, Blues Deluxe™/DeVille™, Steel King™, and Super-Sonic™ Series amplifiers manufactured from '98-Present.

Original input jack for Marshall JTM30 JTM60 JCM60 amplifiers. SPDT switch and 5 pin. PCB Mount.

Mono input jack for Peavey Valveking amplifiers, nut and washer not included!

Stereo jack for Peavey amplifiers. Washer and nut are included.

Stereo input jack for Peavey amplifiers. Nut and washer not included!

Fender replacement internal speaker cable. Features a 1/4 "right-angle plug on one side and standard speaker terminals on the other side.

Original input jack for Marshall JTM30, JTM60 and JCM60 amplifiers. DPDT switch and 9 pin. PCB Mount.

Original stereo input jack for Marshall brand amplifiers.

Mono jack for Peavey brand Peavey with 2 high definition (High Definition or HID). Washer and nut not included.

Stereo input jack for Peavey brand Peavey . Nut and washer not included!

The Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds!

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Replacement thumbscrew for Boss battery compartments. Stainless steel. Not exactly the same color as the original, but it fits.

Original "Closed Circuit" jack for use in Fender amps. Supplied with nut and washer.

It is sent in its original bag.

Path Number: 00371170000

Original jack for VOX AC30 VR. It is not shipped in its original bag. Patch Number: 530000001871

Original mono input jack for Marshall brand amplifiers.

Original Blackstar switch. It is not shipped in its original bag.

Blackstar original speaker jack for your S1-104-EL34. It is not shipped in its original bag. The washer and nut are included.

Mono input jack for Peavey brand. It does not include a nut or washer!

Original Mesa Boogie Mono jack like used in lots of current models like Mark 5-Twenty-Five, Dual Rectifier 100W Head etc.

2 Genuine R / A Stereo Jacks for use in Fender amps built from 1999 to present. They are shipped in their original bag. Bushing Length = 0.34 "

Original Jack made by Cliff UK for the VOX AD120VTH, AD120, AD100VT and AD100VTXL. It is not shipped in its original bag. Patch Number: V904540016 or 530000000229.

Original Marshall brand jack for use in MG Series models. It can be used both on the footswitch and on the CD input.

Original jack of several models of Blackstar, Vox and Marshall . The nut is not included. It is not shipped in its original bag.

Original Vox power connector + fuse holder for various models of the brand. Path Number: 530000000199