BOURNS 250K MN250K DUAL SPLIT SHAFT POTENTIOMETER POT BLEND / BALANCE WITH CENTER DETENT

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Swithcraft original jack model 113X made in the USA. Special for effect pedals.

3-way selector made by the Electroswitch company in the United States, famous for its high resistance to use, almost 0% noise and its ease to solder the cables in it. This brand of selector has been around since the early days of the electric guitar and is the best you can find on the market today.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Excellent quality single-core cables with 1 meter RED and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical stranded old amp cable.

Genuine and authentic Sprague brand capacitors imported from Mexico, ideal for all types of guitars with single coils of any guitar brand but especially the Fender brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.

Ideal potentiometer for thin bodies for use on electric basses with active guitar pickups thanks to its central stop. Metric measurements for basses made in China, Japan, South Korea, Indonesia... Made in South Korea. One washer and two nuts are included.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

5 nuts and 5 washers that can be used in jacks and also in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are of American metric although the pressure washers (Lockwasher) would be missing.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Authentic and genuine Sprague Orange Drop 715P series (polypropylene) capacitors made in the USA.

These compact 250K concentric pots allow you to get the maximum amount of adjustability in a confined control cavity. Includes mounting nuts and washers.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Ideal potentiometer for thin bodies for use on electric basses with active guitar pickups thanks to its central stop. Metric measurements for basses made in China, Japan, South Korea, Indonesia ... Made in South Korea by Alpha . A washer and two nuts are included.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Authentic and genuine Switchcraft brand jack model # L11 (jack is slightly longer than model # 11!). Great for use on your Fender guitar or stomp box, although it can be used on amps without any problems. Very hard and resistant and with a quality proven for many years.

Genuine and authentic Sprague brand capacitors imported from the USA (United States) ideal for all types of guitars with single coil pickups of any guitar or bass brand. With this condenser, you will get a softer and warmer tone than other ceramic condensers.

Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Excellent quality single-core cables with 1 meter YELLOW and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Authentic and Genuine Sprague Orange Drop 715P Series Capacitors Made in America. They are the condensers preferred by technicians around the world who repair vintage amplifiers from brands such as Fender , Ampeg , Magnatone, Marshall , Valco among many other brands. They are also ideal for guitars and basses, HI-FI stereos, and vintage radios.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Guitar volume and tone 1Meg split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Excellent quality single-core cables with 1 meter WHITE and 1 meter BLACK "Vintage" color cotton coating and single conductor, to wire any brand of guitar or bass on the market: Fender , Gibson , Ibanez , Jakson, Rickenbacker .. The cables can also be used to wire a combo or display or to make the typical old amp braided cable.

Switchcraft 152B jack - Stereo end pin. 15/32 "dia. 1/2" mounting hole. For acoustic and active electronics guitars. Turns on battery when plug is inserted. With nut, washer and the brand Switchcraft serigraphed. MADE IN USA

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

We offer you 1 meter of self-adhesive copper foil tape of the highest quality and with a width of 30 mm (we also sell 50 mm and ideal aluminum tape for your pickguard or for the pickups. You can see it by clicking on the icon of our store).