Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.

Dual 50K logarithmic or audio potentiometer manufactured by Bourns and with a tolerance of 20%.

PCB for Push-Push Pots. Designed for ON-OFF switching function.

High quality and robust dual Bourns potentiometer from the PDB182 series for use on electronic guitars and basses. With central stop!

These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.

These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.

High quality and robust dual Bourns potentiometer from the PDB182 series for use on electronic guitars and basses. With central stop!

Bourns brand potentiometer made for guitars or basses. High quality with a tolerance of ± 20 %. With a very smooth twist.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Brass Sleeves (.250 OD X .238 ID X .375) - Convert Split Shaft Pot to Solid Shaft Potentiometer with American measures ( CTS , Emerson Custom Guitar, Fender , Gibson , Bourns , PEC ...). Pack 5 items.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.

High quality and robust dual Bourns potentiometer from the PDB182 series for use on electronic guitars and basses. No central stop!

High quality and robust dual Bourns potentiometer from the PDB182 series for use on electronic guitars and basses. No central stop!

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

5 original Switchcraft brand nuts to use on various models of their jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric although the pressure washers (Lockwasher) would be missing.

Potentiometer Bourns B300K Linear for Jimmy Page Gibson SG Double Nec k or Eric Johnson Wiring.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Potentiometer Bourns B300K Linear for Jimmy Page Gibson SG Double Nec k or Eric Johnson Wiring.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. Two washers and two nuts are included.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. Two washers and two nuts are included.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. With a very smooth twist. PDB241 series.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. With a very smooth twist. PDB241 series.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. With a very smooth twist. PDB241 series.

Pot for controlling the volume or tone of active pickups, or for use after the preamp of a piezo-saddle electric guitar bridge. Made by Bourns .

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Bourns brand potentiometer made for guitars or basses. High quality with a tolerance of ± 20 %. With a very smooth twist.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. With a very smooth twist. PDB241 series.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

High quality potentiometer manufactured by Bourns ideal for Gibson , Epihone or similar guitars. The measurements are the same as the CTS Long Shaft model 450GT.
Measurements:

Total pot depth - 40mm

Length of threaded shaft - 9mm

Shaft diameter - 9.5mm

Base of pot diameter - 23.5mm

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

5 original Switchcraft brand nuts, 5 plain washers and 5 lock washers to use on various models of your jacks. They can also be used in potentiometers made in the United States or Canada ( CTS , Bourns , PEC ..) because they are American metric. 15 items are sent as they appear in the photo.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a smooth but precise twist. PDB241 series.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of two non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Pack of 2 items.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Pack of 2 items.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. Two nuts and a washer are included.

Set of 4 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea and exclusively for lefties. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Potentiometer Bourns 300K Audio for Eric Johnson Wiring. DISCONTINUED!

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

High quality potentiometer manufactured by Bourns ideal for Gibson , Epihone or similar guitars. The measurements are the same as the CTS Long Shaft model 450GT.
Measurements:

Total pot depth - 40mm

Length of threaded shaft - 9mm

Shaft diameter - 9.5mm

Base of pot diameter - 23.5mm

Non original button for Gibson, Epiphone and other guitars made in South Korea. This button can only be used on those potentiometers with American measurements (not metric!) from Bourns, CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Excellent value for money.

Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!

Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for left-handed Gibson , Epiphone or other brands made in the United States. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

This genuine Fender thin aluminum shielding requires no additional wiring. It fits on the underside of your Stratocaster pickguard and helps with noise-cancellation during play.

Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in the USA!

Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)

Set of two reissued buttons of the old ones that used the Harmony or Silver tone guitars. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem)

Set of 2 non-original buttons for Gibson , Epiphone or other Epiphone made in the USA. These buttons can only be used in those potentiometers of American measurements (not metric or oriental!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

CAUTION: In some Les pauls, Este potentiometer can be very large!

Authentic and genuine buttons made by Davies Molding in the USA. This button will give you the quality and craftsmanship of this manufacturer that you need in replacement or construction of effects pedals, amplifiers, radios and other projects if you need it.

Set of two reissued buttons of the old ones that used Harmony guitars, old KAY or Philco radios. These buttons only fit perfectly on CTS or Emerson Custom Guitars "Split Shaft" potentiometers on models such as 450GT, EPXXXX, mini, left hand or Push-Pull (all other brands or metric sizes drop or adjust too slightly to the stem).

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Set of 2 non-original buttons for Gibson , Epiphone or other brands Epiphone made in South Korea. This button can only be used in those potentiometers of American measures (not metric!) Of brands such as Bourns , CTS or PEAC among other manufacturers ("24 pin inch type for knurled shaft"). Great value for the price.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

CAUTION: In some Les pauls, Este potentiometer can be very large.

Original Fender buttons for Stratocaster model guitars. Path Number: 0992035000

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

Original Fender buttons for Stratocaster model guitars. Path Number: 0991369000

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).

Original Fender buttons for Stratocaster model guitars. Path Number: 0991365000

Original Fender buttons for Stratocaster model guitars. Path Number: 0991369000

Original Fender buttons for their Jaguar, Mustang and Mustang electric bass models. Path Number: 0019455049

The Grease Bucket circut is a design in which they have a Cap and a Resister added to each pot. The purpose of the resistor is to lower the load and make the pickups more powerful but still maintain a ground so that some highs still bleed through to ground, by doing that you keep the sound from being to bright.

Original Fender brand buttons for Jazz Bass. Path Number: 0991370000

Crafted to give your Tele® the aged look and feel of a well-loved original, Road Worn parts are genuine Fender® replacement parts. Designed to the same specifications as their original-era counterparts, and wearing the patina of age, Road Worn parts let you easily customize your guitar with vintage-inspired aesthetics.

Original Fender buttons for Fender Telecaster and Precision Bass guitars. Path Number: 0991366000

Original Fender brand buttons for Fender Telecaster model guitars. Path Number: 0992056000

Original Fender replacement for Telecaster guitars, set of 2 knobs. Chrome dome knobs.