Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Potentiometer of the Alpha brand of the best value for money. Very accurate and durable.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Potentiometer of the Alpha brand of the best value for money. Very accurate and durable.

Alpha brand potentiometer made in Taiwan ideal for guitars or basses although it can also be used in effect pedals, mixing consoles ... Its measurements are ideal for those guitars manufactured outside the United States because the shaft diameter is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing.

Manufacturer: ELECTRONICA BAILE
Manufacturer Part No: B500K
Specifications
Adjustment Type: Top Adjustment
Power: 1 / 2W
Resistance: 500K OHM
Type: Linear
Features
Knurled Shaft
Type B
Suits Most Standard knobs
Shaft Diameter: 6mm
Shaft Length: 10mm
Mounting Hole: 7.5mm
Base Diameter: 16mm

Ideal for guitars with holes too narrow or shallow!
Quality very similar to Alpha Brand.

Manufacturer: ELECTRONIC DANCE
Manufacturer Part No: A500K
Specifications
Adjustment Type: Top Adjustment
Power: 1 / 2W
Resistance: 500K OHM
Type: Audio or Log
Features
Knurled Shaft
Type A
Suits Most Standard knobs
Shaft Diameter: 6mm
Shaft Length: 10mm
Mounting Hole: 7.5mm
Base Diameter: 16mm

Ideal for guitars with holes too narrow or shallow!
Quality very similar to Alpha Brand.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Potentiometer made in China. Its measurements are ideal for those guitars made outside of the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing. Easy to turn, a plain washer, a serrated washer and two nuts are included.

Potentiometer made in China. Its measurements are ideal for those guitars made outside of the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing.

Potentiometer of the Alpha brand special mini version for those electroacoustic guitars that have a preamp or for use in amplifiers or effects pedals. This brand has been supplying major guitar manufacturers such as Fender , Gibson , Ibanez and many others for many years for their guitars made outside the United States.

Alpha brand potentiometer made in Taiwan of the RV16AF series ideal for guitars or basses although it can also be used in effect pedals, mixing consoles .. Its measurements are ideal for those guitars made outside the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without filing

Potentiometer made in Taiwan. Its measurements are ideal for those guitars made in the United States because the diameter of the shaft is greater than metric potentiometers, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing. Easy to turn, a plain washer, a serrated washer and a nut are included.

Alpha brand potentiometer made for electric guitars with a very thin thickness or a very tight gap where size is an issue. With great quality, a smoother and more precise turn than the other 16mm potentiometers that I sell in my store. A washer and a nut are included.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.

High quality and robust dual Bourns potentiometer from the PDB182 series for use on electronic guitars and basses. No central stop!

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

High quality potentiometer manufactured by Bourns ideal for Gibson , Epihone or similar guitars. The measurements are the same as the CTS Long Shaft model 450GT.
Measurements:

Total pot depth - 40mm

Length of threaded shaft - 9mm

Shaft diameter - 9.5mm

Base of pot diameter - 23.5mm

ON REQUEST! ESTIMATED DELIVERY 4 TO 31 WORKING DAYS!

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

ON REQUEST! ESTIMATED DELIVERY 5 TO 45 DAYS!

500K logarithmic potentiometer ideal for acoustic guitars, jazz type or even Cigar Box and the like. Made in the United States and imported.

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. Two nuts and a washer are included.

High quality potentiometer manufactured by Bourns ideal for Gibson , Epihone or similar guitars. The measurements are the same as the CTS Long Shaft model 450GT.
Measurements:

Total pot depth - 40mm

Length of threaded shaft - 9mm

Shaft diameter - 9.5mm

Base of pot diameter - 23.5mm

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k solid shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Göldo´s finest!

Smooth-running and absolutely long-lasting thanks to the solid components. And: The tinned housing guarantees relaxed soldering work.

Incl. washer, lock washer and nut.

Thread: 10 x 8mm Ø

Housing: 24mm Ø

Resistance: 500K log.

Knurled split shaft

Heavy duty

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k solid shat shaft pot. Log or audio taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment on a pickguard or control plate.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

CAUTION: In some Les pauls, Este potentiometer can be very large!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

Emerson PRO CTS - 500K Long (3/4 ") Split Shaft Potentiometer

- 1/4 "split shaft for fine-knurled (24-spline) US Spec knobs.
- Typically used on Carved Top Les Pauls, but can be used on any guitar that requires a 500K Long Split Shaft Potentiometer.

These are the best quality CTS pots available right now. 

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/8 in.

Length of Shaft 3/8 in.

Made in the USA.

The best potentiometer made by CTS for guitars is already here in España ! Its minimum resistance 500k and with only 9% tolerance will never have a potentiometer that goes below 500k and does not rise above 550K.

Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/8 in.

Length of Shaft 3/8 in.

Made in the USA.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

USA thread and splines:

Length of Threaded Bushing 3/4 in

Length of Shaft 3/8 in.

Made in the USA.

Acts as a normal volume or tone control, and push up to activate its on/on double-pole double throw mini switch. Controls pickup phasing, series/parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included. CAUTION: In some Les Pauls, this potentiometer can be very large.

Manufacturer: Bourns

Mounting Style: Panel Mount

Termination Style: Solder Lug

Number of gangs: 1 Gang

Resistance: 500 kOhms

Bias: Log

Orientation: Right-handed

Power Frequency: 50 mW (1/20 W)

Maximum voltage: 100 VAC

Tolerance: 20 %.

Element type: Carbon

Number of Turns: 1 Turn

Shaft type: Knurled / Serrated

Shaft diameter: 6 mm

Shaft length: 19 mm

Switch Type: Push-Push Switch

Number of Detent: Without Detent

Type: Rotary

Life: 15000 Cycle

Minimum operating temperature: - 10 C

Maximum operating temperature: + 70 C

Bushing Thread: 3/6 in-32

Height: 24.8 mm

Length: 19 mm

ON REQUEST! ESTIMATED DELIVERY 5 TO 31 WORKING DAYS!

Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.

Measures:

3.7cm X 1.7 cm

Two potentiometers in one for you Fender Jazz Bass reissue or Telecaster designed by CTS ! Stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. ATTENTION! the top / volume section is 500K and the bottom / tone section is 250K

3/8 "mounting hole. Top shaft is 3/16" (4.75mm) diameter and bottom shaft is 17/64 "(6.75mm) diameter.

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

The CHOPPERPOT's switch is a momentary switch. In order to prevent too loud noise when actuated and to make it feel nice and smooth, a rubber ring is mounted on the axle. The CHOPPERPOT consists of a normal potentiometer with knurled shaft, which can be wired independently of the switching function. Underneath sits a 6-pole switch that is actuated when pressure is applied to the axle.

The common kill switches have one thing in common: As the name suggests, the signal is killed when the switch is pressed. Some people would much rather have it the other way around, a reverse kill switch, so to speak! No matter, the göldo CHOPPERPOT can do it both ways - and much more! It corresponds in construction to the proven göldo push-push pot and includes a PCB for easy mounting and wiring.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

The CHOPPERPOT's switch is a momentary switch. In order to prevent too loud noise when actuated and to make it feel nice and smooth, a rubber ring is mounted on the axle. The CHOPPERPOT consists of a normal potentiometer with knurled shaft, which can be wired independently of the switching function. Underneath sits a 6-pole switch that is actuated when pressure is applied to the axle.

The common kill switches have one thing in common: As the name suggests, the signal is killed when the switch is pressed. Some people would much rather have it the other way around, a reverse kill switch, so to speak! No matter, the göldo CHOPPERPOT can do it both ways - and much more! It corresponds in construction to the proven göldo push-push pot and includes a PCB for easy mounting and wiring.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

The CHOPPERPOT's switch is a momentary switch. In order to prevent too loud noise when actuated and to make it feel nice and smooth, a rubber ring is mounted on the axle. The CHOPPERPOT consists of a normal potentiometer with knurled shaft, which can be wired independently of the switching function. Underneath sits a 6-pole switch that is actuated when pressure is applied to the axle.

The common kill switches have one thing in common: As the name suggests, the signal is killed when the switch is pressed. Some people would much rather have it the other way around, a reverse kill switch, so to speak! No matter, the göldo CHOPPERPOT can do it both ways - and much more! It corresponds in construction to the proven göldo push-push pot and includes a PCB for easy mounting and wiring.

These compact 500K concentric pots allow you to get the maximum amount of adjustability in a confined control cavity. Includes mounting nuts and washers.

Two potentiometers in one for you Fender Jazz Bass or Telecaster designed by CTS ! Stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. ATTENTION! the top / volume section is 500K and the bottom / tone section is 500K

"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.

Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.

"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.

Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.