Potentiometer made for electric guitars with a very thin thickness or a very tight gap where size is an issue. With great quality, a smoother and more precise turn than the other 16mm potentiometers that we sell in our store. A washer and a nut are included.

Pot for controlling one pickup or source to another, with both signals full at the center detent. Split shaft. Metric.

Potentiometer for basses or guitars, ideal for bodies with little thickness such as Ibanez or similar thanks to its long shaft. Metric measurements for guitars made in China, Japan, South Korea, Indonesia ...

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effect pedals or amps. This brand has been supplying major guitar manufacturers such as Fender , Gibson , Ibanez and many others for many years for their guitars made outside the United States.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Potentiometer of the brand Alpha mini version special for those guitars with little depth or with little gap between components and cables. It can also be used on effects pedals, amplifiers, or other musical devices.

Potentiometer of the Alpha brand of the best value for money. Very accurate and durable.

Potentiometer made in China. Its measurements are ideal for those guitars made outside of the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing. Easy to turn, a plain washer, a serrated washer and two nuts are included.

Potentiometer made in China. Its measurements are ideal for those guitars made outside of the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing.

Alpha brand potentiometer made in Taiwan of the RV16AF series ideal for guitars or basses although it can also be used in effect pedals, mixing consoles .. Its measurements are ideal for those guitars made outside the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without filing

Partsland brand potentiometer made in South Korea. Its measurements are ideal for those guitars made outside of the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing. Easy to turn, includes washer and nut.

Alpha brand potentiometer made in Taiwan of the RV24AF series ideal for guitars. Its measurements are ideal for those guitars made outside of the United States because the diameter of the shaft is smaller, which makes it fit perfectly in the hole of the pickguard or the wood without the need for filing.

Bourns brand potentiometer made for guitars or basses. High quality with a tolerance of ± 20 %. With a very smooth twist.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. One mounting nut and flat washer included. Measures metric for Japan, China or Korea Guitars!

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Bourns brand potentiometer made for guitars (PDB181-GTR series) that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included.
Measurements:

Total length from base to stem - 30mm

Screw-in shaft length - 11mm

Diameter length for the "Knob" - 10mm

Base diameter - 16mm

Pot for controlling one pickup or source to another, with both signals full at the center detent. Audio or Linear Taper with split shaft.

Bourns brand potentiometer made for guitars or basses that have a very small gap or thickness. High quality with a tolerance of ± 20 %. A washer and a nut are included. With a very smooth twist. PDB241 series.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Bourns brand potentiometer made for guitars or basses. High quality with a tolerance of ± 20 %. With a very smooth twist.

Measurements:

Total length from base to stem - 30mm
Screw-in shaft length - 11mm
Diameter length for the "Knob" - 10mm
Base diameter - 24mm

Potentiometer manufactured by CTS in the United States, ideal for types of basses and guitars on the market (if your guitar is from outside the United States you will have to file the pickguard or the wood so that the shaft can fit since its diameter is American metric).

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Göldo´s finest!

Smooth-running and absolutely long-lasting thanks to the solid components. And: The tinned housing guarantees relaxed soldering work.

Incl. washer, lock washer and nut.

Thread: 10 x 8mm Ø

Housing: 24mm Ø

Resistance: 250K lin.

Knurled split shaft

Heavy duty

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Göldo´s finest!

Smooth-running and absolutely long-lasting thanks to the solid components. And: The tinned housing guarantees relaxed soldering work.

Incl. washer, lock washer and nut.

Thread: 10 x 8mm Ø

Housing: 24mm Ø

Resistance: 500K lin.

Knurled split shaft

Heavy duty

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

Göldo´s finest!

Smooth-running and absolutely long-lasting thanks to the solid components. And: The tinned housing guarantees relaxed soldering work.

Incl. washer, lock washer and nut.

Thread: 10 x 8mm Ø

Housing: 24mm Ø

Resistance: 250K log.

Knurled split shaft

Heavy duty

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Audio or log taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

CTS pots with a shorter ¼ ”bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shat shaft pot. Linear taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment on a pickguard or control plate.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

ON DEMAND! ESTIMATED DELIVERY FROM 5 TO 31 WORKING DAYS!

No-load tone control in best göldo quality!

When turned up fully, the signal is routed to the output without being influenced by the tone potentiometer. The result is more highs than usual and a great directness! The high-quality göldo "Cut Circuit" potentiometer is smooth-running, its solid components provide for a large longevity. The tin-plated housing guarantees relaxed soldering.

DC resistor: 250kOhm log. / No Load

Thread: 10 x 8mm Ø

Housing: 24mm Ø

Knurled split shaft

Heavy Duty

Acts as a normal volume or tone control, and pulls up to activate its on / on double-pole double throw mini switch. Controls pickup phasing, series / parallel switching and coil-taps- Split shaft with coarse knurling. Two mounting nuts, flat washer and lock washer included.

CAUTION: In some Les pauls, Este potentiometer can be very large.

Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ± 8% resistance tolerance compared to CTS products offered by most other suppliers.

The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

These are the best quality CTS pots available right now. 

Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

"Push-Push" potentiometer that will allow you to make multiple variations on your humbucker pickups (coil tapping, splitting, and phasing). The specifications are for American guitars but can be used from other countries by filing the wood or pickguard to fit the diameter of the shaft.

Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.

Measures:

3.7cm X 1.7 cm

Similar in function to the Fender "No Load" pot, the Emerson Pro Blender pot is an improvement to this design idea. Our Blender Pot acts as a true bypass when rotated between 9 and 10. The main difference from the "No Load" is that the Emerson Pro Blender pot does NOT have a detent, which means a no click feel between 9 and 10.

Two potentiometers in one for you Fender Jazz Bass reissue or Telecaster designed by CTS ! Stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. ATTENTION! the top / volume section is 500K and the bottom / tone section is 250K

3/8 "mounting hole. Top shaft is 3/16" (4.75mm) diameter and bottom shaft is 17/64 "(6.75mm) diameter.

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots.

The Super Pots from Dunlop are high quality, high performance, volume and tone pots designed and built to last a lifetime. These pots are resistant to dust and corrosion so they will provide smooth performance without the noise and scratchiness associated with normal run of the mill pots.

These compact 250K concentric pots allow you to get the maximum amount of adjustability in a confined control cavity. Includes mounting nuts and washers.

Original Fender potentiometer for your TBX. 1 Mega linear plus 250K logarithmic. P / N: 0021686000

Dimensions:

6mm split shaft with 3/8 "X 3/8" bushing

These compact 250K concentric pots allow you to get the maximum amount of adjustability in a confined control cavity. Includes mounting nuts and washers.

The Treble Bass Expander (TBX) is a 250K / 1Meg stacked, center-topped potentiometer that expands your tonal palette. It works as a standard tone control from 1 to 5, after which the resistance decreases and the bass, treble, presence and output increase. Assembly instructions and accessory installation included.

"Tone up" and modify your favorite guitar or bass with an S-1 ™ Switch from Fender ®.

Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 ™ switch allows a multitude of tonal options for your instrument.