NUESTRO HORARIO DEL 3 AL 15 DE JULIO SERÁ DE 09:30 A 15:00.
cart2 0 Cart
3 Account
Contact us
4 Info
4

Transformadores e Inductores

☞ Inductores (Choke), Transformadores de potencia y de salida de primeras marcas para tu amplificador de instrumento musical o de uso doméstico ッ

Transformadores e Inductores

Hay 1765 productos.

Mostrando 1-100 de 1765 artículo(s)

Filtros activos

MERCURY MAGNETICS...

2 Foot Heavy Duty AC-Cord - Our 14 Gauge HD Coppertone Cords have twice the copper of a typical 18 gauge power cord. You may be surprised to learn that most amps are sold with severely under-sized AC power cords. And you'll usually find the same or incorrectly-sized AC power cords being used for everything from 5 watt to 100 watt amps. Did you know that the AC power cords supplied with virtually ALL amps were designed for everything but amps? It's extremely rare that a manufacturer will supply a power cord beefy enough to do the job — yet virtually all tube-based amplifiers could easily benefit — and sound a lot better — with this simple, inexpensive fix. Tech Specs: 14AWG/3 Conductor cable with USA 3 prong (NEMA 5-15P) grounded plug and IEC-C13 female connector. RoHS compliant and UL/CUL/CSA listed. Electrical rating: 15A/125V/1875W.

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

Precio 52,15 €

MERCURY MAGNETICS...

6 Foot Heavy Duty AC-Cord - Our 14 Gauge HD Coppertone Cords have twice the copper of a typical 18 gauge power cord. You may be surprised to learn that most amps are sold with severely under-sized AC power cords. And you'll usually find the same or incorrectly-sized AC power cords being used for everything from 5 watt to 100 watt amps. Did you know that the AC power cords supplied with virtually ALL amps were designed for everything but amps? It's extremely rare that a manufacturer will supply a power cord beefy enough to do the job — yet virtually all tube-based amplifiers could easily benefit — and sound a lot better — with this simple, inexpensive fix. Tech Specs: 14AWG/3 Conductor cable with USA 3 prong (NEMA 5-15P) grounded plug and IEC-C13 female connector. RoHS compliant and UL/CUL/CSA listed. Electrical rating: 15A/125V/1875W.

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

Precio 67,23 €

MERCURY MAGNETICS...

6 Foot Super Duty AC-Cord - The 12 Gauge Audio Grade copper wire in our SD Coppertone Cords exceeds the wiring in even your house wiring for maximum power delivery to your audio amp. Tech Specs: 12AWG/3 Conductor cable with USA 3 prong (NEMA 5-15P) grounded plug and IEC-C13 female connector. RoHS compliant and UL/CUL/CSA listed. Electrical rating: 15A/125V/1875W.

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

Precio 84,96 €

MERCURY MAGNETICS...

10 Foot Heavy Duty AC-Cord - Our 14 Gauge HD Coppertone Cords have twice the copper of a typical 18 gauge power cord. You may be surprised to learn that most amps are sold with severely under-sized AC power cords. And you'll usually find the same or incorrectly-sized AC power cords being used for everything from 5 watt to 100 watt amps. Did you know that the AC power cords supplied with virtually ALL amps were designed for everything but amps? It's extremely rare that a manufacturer will supply a power cord beefy enough to do the job — yet virtually all tube-based amplifiers could easily benefit — and sound a lot better — with this simple, inexpensive fix. Tech Specs: 14AWG/3 Conductor cable with USA 3 prong (NEMA 5-15P) grounded plug and IEC-C13 female connector. RoHS compliant and UL/CUL/CSA listed. Electrical rating: 15A/125V/1875W.

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

Precio 84,96 €

MARSHALL 100W JCM800 KERRY...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Original Marshall Output transformer, 100W, JCM800 Kerry King Signature, 2203KK, D5446

Transformator Type: Output Transformers

Stack: EI120

Transformer Power: 100VA

OT-Tubes: KT88

OT-Impedance: 4+8+16 ohms

Precio 210,74 €

FENDER MESA BOOGIE REVERB...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Reverb drive Transformer, suitable for allmost all Fenders since 1964(= 022921). 

Custom made for TAD in the USA!. 

primary used by all Fender® models with tube reverb from 1963-1990 and Reissue models like:

Fender® Princeton Reverb

Fender® Deluxe Reverb

Fender® Vibrolux Reverb

Fender® Pro Reverb

Fender® Super Reverb

Fender® Twin Reverb

Fender® Quad Reverb

Fender® Super Six Reverb

Fender® Vibrosonic

Fender®`65 Princeton Reverb Reissue

Fender®`65 Deluxe Reverb Reissue

Fender®`64 Custom Deluxe Reverb Amp

Fender®`65 Super Reverb Reissue

Fender®`65 Twin Reverb Reissue

Fender®'65 Twin Custom(TM) 15

Fender® Prosonic 

Replaces also the 037099 of the `63 Vibroverb Reissue

Also suitabel for Mesa Boogie® #550185

For the Fender®`63 Reverb Unit Reissue please order the 004-7605-000

Mounting center:  43mm

ca. 25kOhm to 8 Ohm

Precio 41,31 €

FENDER VIBROKING REVERB 63'...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Fender style reverb drive transformer 047605 (identical with old Fender p/n: 012990, 125A12A).

used in the Fender Vibroking with 6V6 reverb driver tube and the  63` Fender Reverb Reissue.

Impedance ca. 7.8k ohms. 

Custom made for TAD in the USA, paper stick wound!

Bigger Stacking = better tone! 

Primary:

A1 Red

B+ Blue 

Secondary:

8Ω Green

0Ω Black 

Dimensions:  W x H x D: 43 x 35 x 48mm

Mounting: 2" (50,8mm)

Precio 49,58 €

FENDER CHAMP 5F1 OUTPUT...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Output transformer SE (single ended) 1x6V6, 4Ohms, 5W

for Tweed Champ. 

US-MADE, paper stick bobbin! 

secondary impedance : 4 Ohms

primary impedance: 8.2k Ohm

primary current: max. 35mA

Mounting on: 2" 

W x D x H: 1 11/16" x 1 13/32" x 1 3/8" 

matching recommended speakers:

Jensen P8R, P10R-4, P12R-4, C8R and CH1270-4 

primary:

      HT            blue

      A            red 

secondary:

      0 Ohm            black

      4 Ohm            green

Transformator Type: Output Transformers

OT-Tubes: 6V6

Precio 50,41 €

TAD CHOKE MARSHALL 100W OR...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Choke for all Valve Marshalls with 100W / 50W, up to JCM800 Range like 2203, 2204, 2205, 2210, 1959, 1987,  1992 and many others. 

data: 5 H, 120mA DC, Rdc 115 Ohm. 

Mounting on 44.5mm x 40mm 

replacement for INDT00013 and Drake 1471-263 

Upgrade for the Marshall JCM2000 series: replaces R71 (270 Ohm/7W) in TSL and DSL100 models. 

also very usefull as a modification on the Marshall JVM Series (410H, 410C, 210H, 205H, 205C, 215C), replaces R106 (470Ohm/7W). 

Replacement for Laney #6013 choke also!

Precio 54,54 €

MERCURY MAGNETICS...

10 Foot Super Duty AC-Cord - The 12 Gauge Audio Grade copper wire in our SD Coppertone Cords exceeds the wiring in even your house wiring for maximum power delivery to your audio amp. Tech Specs: 12AWG/3 Conductor cable with USA 3 prong (NEMA 5-15P) grounded plug and IEC-C13 female connector. RoHS compliant and UL/CUL/CSA listed. Electrical rating: 15A/125V/1875W.

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

Precio 102,69 €

TAD VOX AC30 JMI CHOKE 100...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Choke 100mA, 19H, 500 Ohms for almost all "JMI Product" and "VOX Product" AC30. Perfect Replacement. 

Custom made by Dagnall in Europe for TAD! 

Lamination: 3", Stacking 1" 

Overall dimensions: L x W x H: 107mm (incl. lugs) x 60mm x 66mm. 

Mounting: 90mm

Transformator Type: Choke

Stack: 3 Inch

Precio 57,84 €

MARSHALL SOLID STATE MODELS...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Mains Transf. 2x340V 

NOS original Marshall mains transformer, 292-516

Made in England 

Special Item! 

Lamination 3", Stack 1" 

Mounting on 93mm 

Limited Supply 

Primary:                  

      0V      #1

      117V      #2                        

      0V      #5

      117V      #6                 

                        

Secondary:                        

      17V@0.8A      Red

      0V            Black

      17V            Red

Precio 74,37 €

FENDER DELUXE PRINCETON...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

UPGRADE: OUTPUT TRANSFORMER for Fender Blues Junior, Hot Rod Series, 15W, 4, 8 + 16 Ohms

Upgrade: stacking is 1". 

Impedance ca. 7k p-p 

Primary:            

      A1      Brown

      B+      Red

      A2      Blue            

Secondary:            

      16 Ohm       white

      8 Ohm      green

      4 Ohm      yellow

      0 Ohm      black 

Please swap blue and brown for correct operation!. 

Fits also Fender Musicmaster Bass!

Transformator Type: Output Transformers

Stack: 2.25 Inch

Precio 76,86 €

FENDER TWEED DELUXE 5E3...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

2x 6V6GT  , aprox. 18 Watt with 4, 8 and 16 Ohms

traditionally made with authentic materials and paper bobbin. 

Made in USA - vintage correct paper bobbin wound for superior tone!

Exactly made after original specs for the 1957-1959 Fender 5E3 Deluxe amp but with additional 4 + 16 Ohms tabs to allow propper connecting to alternative speaker set-up and various external cabinets. 

NEW: with increased stack (1") for tight and superior bass response. 

Mounting on 3 1/8" 

Overall Dimensions:      W x H x D:            93,5mm x 58mm x 58mm incl.

Zaa ca. 8k Ohm 

Primary:            

      A1      Blue

      B+      Red

      A2      Brown            

Secondary:            

      16 Ohms      Orange

      8 Ohms      Green

      4 Ohms      Yellow

      0 Ohm      Black

Transformator Type: Output Transformers

OT-Tubes: 6V6

Precio 82,64 €

FENDER BLUES JUNIOR HOT ROD...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

UPGRADE: OUTPUT TRANSFORMER for Fender Blues Junior, Hot Rod Series, 15W, 4, 8 + 16 Ohms

Upgrade: stacking is 1". 

Impedance ca. 7k p-p 

Primary:            

      A1      Brown

      B+      Red

      A2      Blue            

Secondary:            

      16 Ohm       white

      8 Ohm      green

      4 Ohm      yellow

      0 Ohm      black 

Please swap blue and brown for correct operation!. 

Fits also Fender Musicmaster Bass!

Transformator Type: Output Transformers

Stack: 2.25 Inch

Precio 90,91 €

FENDER CHAMPION 600 240V...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Transf.MAINS for: Fender® Champion 600, NEW VERSION: UPGRADE. 

This transformer does support 6L6 tubes also and has hence a higher current rating.

That delivers a more stable tone, also with the stock 6V6 tube. 

Primary:                  #70005

      0V            White

      230V            Black

      240V            Grey 

Secondary:

      280V@80mA      Red

      0V            Red 

      6,3V@1.5A      Green

      0V            Green

Transformator Type: MainTransformer

Stack: 3 Inch

OT-Tubes: 6V6

Additional winding to 230V (primary): 240V

Precio 90,91 €

TAD MESA BOOGIE OUTPUT...

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES.

Output Transformer for Mesa Boogie ® DC2, Studio 22, Studio 22+, F30, Express 525, Transatlantic TA15, Mini Rectifier Twenty-Five

Does not fit mechanically in the Mesa Boogie® 20/20 Power Amp. 

Max 30W for all tube amps running Class AB with 2x EL84, 4 and 8 Ohms. 

mounting on 74mm 

Raa ca. 7.0k 

B x H x T: 60mm (90mm mit Lasche) x 50mm x 51mm 

Primary:                  

      A1      Blue

      HT      Red

      A2      Brown                  

Secondary:                  

      0 Ohm      black

      4 Ohm      green

      8 Ohm      yellow

Transformator Type: Output Transformers

Stack: 2.25 Inch

OT-Tubes: EL84

OT-Impedanz: 4+8 ohms

Precio 91,74 €

MARSHALL ARTIST 3203-4203...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Mains-Transformer for Marshall Artist 3203/4203 

Upgrade for the Dagnall 1961-112 und 1961-116 

NEW Version: Includes top shroud 

117V and 230V/240V operation possible 

Primary:                  

      117V            #9

      0V            #10                  

      117V            #12

      0V            #13 

Secondary:                  

      347V@180mA      #4

      0V            #5                  

      6,3V@3.5A      #6

      0V            #7                  

      20.75V@420mA      #1

      0V            #2

      20.75V            #3

Precio 95,04 €

MARSHALL POWER AMP EL84...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Power transformer: Marshall®  for Power Amp EL84 20/20, #64590A

Primary:  

 230V Brown

 0V Blue  

Secondary:  

 ca.  320V Orange

 0V Black

 320V Red  

ca. 3,15V Yellow

 0V Grey

 3,15V Violet  

ca. 20V White

0V Green 

This is the original manufacturer part so we can´t give precise data of the current loads of the windings.

Precio 95,04 €

MARSHALL JCM 2000 DSL 401...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Original: Marshall® power transformer for DSL401, JCM2000 series. 

117V and 230V/240V operation possible. 

Correct replacement für Dagnall D2500 and und Drake 783 335 

Mounting on 79mm x64mm

Comes as pictured. Suitable shroud: TFC-96-S 

Primary:

      0V      #16

           117V      #14 

      0V      #11

      117V      #9 

Secondary:

      300V      #1

      0V      #2 

      25V      #5

      0V      #6 

      6,3V      #7

      0V      #8

Precio 95,04 €

FENDER DELUXE REVERB '65...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Grand-Stack version with fatter Stack (1") Increases Punch und Bass! 

2x 6V6GT to 4, 8 Ohms 

Improved Version 

CUSTOM MADE IN USA, Paper bobbin wound! 

Upgrade also for the Fender Deluxe Reverb® Reissue and the 64`Custom Deluxe Reverb® Amp (replaces 004-1318-000; 041318).

We recommend this OT for Fender 65`Princeton Reverb® style amps as well, and the auch passend für den Fender Supersonic 22.

The 125A1A-GS also has considerably more iron compared to the 125A1A (022918; 125A10B; 002-2918-000), but fits most chassis without any problems.

Only an additional 3mm mounting hole has to be drilled. Beyond that, no further modifications are required!

The extra iron gives the sound more power and punch without losing definition and complexity. 

Lamination: 2 5/8"      Stack: 1" 

Primary impedance ca. 6.7kOhm

Mounting on 3,125" 

Primary:

      A1      Blue

      B+      Red

      A2      Brown 

Secondary:

      8 Ohms      Green

      4 Ohms      Yellow

      0 Ohms      Black

Transformator Type: Output Transformers

OT-Tubes: 6V6

Precio 95,04 €

TAD AMPEG POWER TRANSFORMER...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Mains filament transformer for vintage US Ampeg® SVT Amps. 

117V and 230V/240V operation possible (see picture #2). 

Superior quality. 

vintage correct lamiantion 3", stack: 2" 

NEW: COMES WITH TOP SHROUD: 

Primary:                  

      0V      Black

      117V      White                  

      0V      Blue

      117V      Grey                  

Secondary:                  

      0V            Green

      6.3V@14A      Green

Stack: 3 Inch

Additional winding to 230V (primary): 110V-120V

Precio 100,00 €

FENDER TWEED SUPER 5F4 PRO...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Output transformer for: Fender® Tweed Super 5F4, Pro 5E5A, Bandmaster 5E7,   4+8 Ohms , Paper Bobbin, correct impedance.

CUSTOM MADE FOR TAD IN THE USA! 

Can be used also for the 45217 like used in the Fender Vibrolux 6G11 and Bandmaster 6G7-A. 

Overall dimensions:  W x H x D: 102,5 (incl. Lug) x 65,5 x 67 mm. 

Mounting on 90.5mm. 

Lamination: 3", Stacking 1,25" 

Impedance: ca. 6k Ohm P-P

power handling: 40 Watts. 

Primary:            

      A1      Blue

      B+      Red

      A2      Brown            

Secondary:            

      8 Ohms      Yellow

      4 Ohms      Green

      0 Ohms      Black

Transformator Type: Output Transformers

Stack: 3 Inch

OT-Tubes: 6L6

OT-Impedanz: 4+8 ohms

Precio 100,83 €

FENDER BANDMASTER REVERB...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Output transformer for 2x6L6GC/5881  4 + 8 Ohm / max. 50 Watt

Exact Transformer for Fender blackface and silverface models: Bandmaster, Bandmaster Reverb (fits TFL5005D also), Pro Amp (8 Ohm), Pro Reverb Amp, Vibrolux (8 Ohm), Vibrolux Reverb, Tremolux (all schematic type AA763+AB763+AA1069). Fits also brownface Vibrolux 6G11-A.

Also replaces Fender P/N 036968 + 125A7A / 022848.

Made in USA with vintage correct paper bobbin wound with superior tone!

Primary impedance: 4.2K

Mounting: 90.5mm

Primary                  

      A1            blue

      HT            red

      A2            brown                  

Secondary                  

      0 Ohm            black

      4 Ohm            yellow

      8 Ohm            green

Transformator Type: Output Transformers

OT-Tubes: 6L6

Precio 103,31 €

MARSHALL SOLID STATE MODELS...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

NOS original Marshall mains transformer, T-4970.

Made in England. 

Special item from old Marshall repair stock. 

Lamination 4 1/2", Stack 2" 

Mounting on 2 1/2" x 2 3/4" 

Limited Supply 

Primary:            

      0V      

      115V      

      220V            

      240V         

                        

Screen:      GN/YEL

                        

Secondary:                        

      22V@3.2A      Black

      0V            Red

      22V@3.2A      Black

Transformator Type: MainTransformer

Stack: EI114(4.5 Inch)

PT-Primary: 110V-120V

Precio 103,31 €

FENDER BASSMAN TEN 50W 70W...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Output transf. for Fender Bassman Ten

2x6L6GC   8   Fender Bassman Ten 

Only for 50W models without Screen taps!

For Fender Bassman Ten 70W models with screen taps please use the 013897 output transformer. 

Lamination: 3", Stack 1 5/8"

Mounting on 64mm x 58mm. 

primary impedance ca. 5.3k 

dimensions: W x H x D: 78mm x 65mm x 87mm 

Custom Made for TAD 

Primary:

      A1      Blue

      HT      Red

      A2      Brown 

Secondary:

      0 Ohm      Black

      8 Ohms      Green

Transformator Type: Output Transformers

Stack: 3 Inch

Precio 104,96 €

FENDER BLUES DELUXE OUTPUT...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Output transformer for: Fender®Blues Deluxe (NOT Reissue !!!) 2x 6L6, 4 und 8 Ohm, 40W. US-Made. 

ca. 4.3k Ohm 

Lamination: 3" 

mounting on 90.5mm 

The Output transformer for the Fender®Blues Deluxe REISSUE can be found at "more matching products and alternatives". 

Primary:            

      A1      Blue

      B+      Red

      A2      Brown            

Secondary:            

      8 Ω      Green

      4 Ω      Yellow

      0 Ω      Black

Transformator Type: Output Transformers

OT-Tubes: 6L6

Secondary:

      0 Ohm      Black

      8 Ohms      Green

Transformator Type: Output Transformers

Stack: 3 Inch

Precio 106,61 €

MARSHALL SOLID STATE MODELS...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

NOS original Marshall mains transformer, for solid state amps. 

Made in England. 

Special item from old Marshall repair stock. 

Lamination 4 1/2", Stack 1 3/4" 

Size: L x W x H: 116mm x 98mm x 107mm 

Limited Supply 

No further info available 

Primary:            

      0V      Orange      

      110V      Pink

      120V      Red

      220V      Blue

      240V      Viol                

 

                        

Secondary:                        

      30V@2.5A      Black

      0V            Yellow

      30V@2.5A      Red

Precio 107,44 €

LANEY LC15R LC15 VC15 CUB...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Power transformer for Laney LC15R, LC15, VC15 (p/n 6094).

Upgraded Laney Part with superior M6 quality lamination also used in Laney Cub 10, Cub 12 and Lionheart L5T

Lamination: 2-5/8" (EI66) , Stack: 1 ½" (38mm)

Primary:            #770005

      117V            #6

      0V            #7                  

      117V            #9

      0V            #10                  

Secondary:                  

      240V      100mA      #11

      20V            #12

      0V            #13

      20V            #14

      240V            #15                  

      3.15V      2.5A      Grey

      0V            Red

      3.15V            Grey

Precio 107,44 €

FENDER CHAMP 25 SE AND...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Transf. Mains for Fender Champ 25 SE and Champ 25. 

Lamination: 3", Stack 2" 

Dimensions: L x W x H: 76mm x 64mm x 93mm

Installation height: 80mm 

Fits Laney AOR30 also!

(increase R75 , R76, filament balance with 2x100R). 

Also perfect for DIY projects up to 25W. Match the chassis K-ACPRV! 

NEW: Comes with top shround and supports all primary voltages of the original! 

Original colors and connection points for 220-240V in brackets:

Primary:                  

      0V            Orange (BLK/RED - CP3)

      120V            Purple (BLK/GRN - CP20)                  

      0V            Grey (BLK/YEL - CP21)

      100V            White (WHT - CP22)

      120V            Black (BLK - CP23)                  

Secondary:

      315V      180mA      Red (CP14)

      0V            Red (CP6)                  

      45V      50mA      Brown (CP7)

      0V            Brown (CP8)                  

      6,3V      2.5 A      Green (CP18)

      0V            Green (CP13)                  

      19V      300mA      Blue (CP16)

      0V            Yellow (CP10)

      19V            Blue (CP17)

Stack: 3 Inch

Additional winding to 230V (primary): 110V-120V

Precio 115,70 €

FENDER ROC PRO 700 1000...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Transf. MAINS for: Fender® Roc Pro 700 und 1000, Performer 650 and Performer 1000, Deluxe112, Deluxe112+, Deluxe 90, Deluxe 85, Princeton 65, Princeton 112+, Bassman 60, Export version with thermal protection.

Replaces the 120V transformer 027668 also.

Replaces 028590

Mounting on 2 1/2" x 2"

Primary:

      T.P.*      Purple

      T.P.*      Purple           

      

      0V            Red

      120V            Green                  

      0V            Yellow

      100V            White

      110V            Grey

      120V            Black                  

secondary                  

      31V            red

      0V            Yellow

      31V            Red 

*: internal thermal protection

Transformator Type: MainTransformer

Stack: 3 Inch

Additional winding to 230V (primary): 110V-120V

Precio 123,97 €

FENDER 65 DELUXE REISSUE...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Mains Transformer for Fender 65 Deluxe Rev. Reissue and '68 Custom Deluxe Reverb.

Also used in the FENDER FSR '65 DELUXE REVERB PAISLEY. 

Lay-down type with top shroud on genuine lamination size (3 3/4"). 

Mounting on 3-1/8'' x 2-1/2'' 

Replacement for A-041317 (004-1317-000). 

UPGRADE: supports also 6L6 power tubes and 5U4 rectifier! 

Primary:                  

      thermal breaker:      Purple            

      0V            Red

      120V            Green                  

      0V            Yellow

      100V            White

      110V            Grey

      120V            Black             

                  

Secondary:                  

      325V      180mA      Red

      48V            Blue

      0V            Green/Yellow

      325V            Red                  

      6,3V      3.6A      Green

      0V            Green                  

      5V      3A      Yellow

      0V            Yellow

Transformator Type: MainTransformer

Stack: EI96(3.75 Inch)

Additional winding to 230V (primary): 110V-120V

Precio 123,97 €

FENDER CONCERT II 240V...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Mains Transf. for Fender Concert II (= 018305). 

Lamination: 3 3/4" Stack: 1 3/4" 

Mounting on 3 1/8" x 2 1/2" 

NEW VERSION WITH SHROUD 

Primary:            #70005      

      0V            White

      220V            Grey

      230V            Black

      240V            Brown 

Secondary:

      0 V            Red

      180 V            Yellow

      360 V@350mA      Red 

      0 V            Brown

      55 V@80mA      Brown 

      0 V            Green

      6,3 V@4.5A      Green

Stack: EI96(3.75 Inch)

Additional winding to 230V (primary): 240V

Precio 127,27 €

FENDER TWEED DELUXE 5E3...

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 4 A 31 DÍAS LABORALES!

Transf.MAINS for: Fender® Tweed Deluxe Amp (5E3 etc.). 

NEW VERSION: 2" STACK and C.T. on filament for low noise

supports 6L6GC and GZ34/5AR4 tubes also! 

Lamination: 3 3/8"

Mounting on 70 x 56mm, lay-down. 

Height above chassis: 75mm

W x D x H: 87mm x 70mm x 90mm

weight: aprox. 2.2kg 

Primary:            

      0 V      Black

      230 V      White

      240 V      Grey 

Secondary:

      335 V@ 150mA      Red

      0 V            Green/Yellow  

      335 V            Red   

      5 V@2A            Yellow

      0 V            Yellow

      3.15V@3A      Green

      0V            Green/Yellow

      3.15V            Green 

With a 5Y3WGTB (RT513) and idling current You get about 350V DC of B+, with a GZ34 (RT501)  it is about 390V

PT-Secondary: incl. 5V winding (for Rectifier)

Transformator Type: MainTransformer

Stack: 3.375 Inch

  

Precio 128,10 €

MERCURY MAGNETICS FENDER...

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

ToneClone transformers are exact genetic duplicates from these sought-after amps. Many came from amps owned by your favorite players. The same amps that were used to record some of the greatest electric guitar songs we’ve known.

Tweed — #14684

Precio 190,99 €
  • ¡Disponible sólo en Internet!

MERCURY MAGNETICS FENDER...

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

ToneClone transformers are exact genetic duplicates from these sought-after amps. Many came from amps owned by your favorite players. The same amps that were used to record some of the greatest electric guitar songs we’ve known.

Brown, Blackface & Silverface Spring Reverb Transformer — #022921

Precio 190,99 €
  • ¡Disponible sólo en Internet!

MERCURY MAGNETICS...

Bajo pedido…



Add this choke to your Valve Special for improved tonal richness — Upgrade over the stock resistor



¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

Precio 190,99 €

MERCURY MAGNETICS FENDER...

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 7 DÍAS DEPENDIENDO DEL DESTINO.

ToneClone transformers are exact genetic duplicates from these sought-after amps. Many came from amps owned by your favorite players. The same amps that were used to record some of the greatest electric guitar songs we’ve known.

Early ‘ 70s — 160PS — 3 Henry

Precio 190,99 €
  • ¡Disponible sólo en Internet!

MERCURY MAGNETICS FENDER...

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

ToneClone transformers are exact genetic duplicates from these sought-after amps. Many came from amps owned by your favorite players. The same amps that were used to record some of the greatest electric guitar songs we’ve known.

4H / 200mA Choke — Fender Tweed Era Part #14684 — Small size

Precio 190,99 €
  • ¡Disponible sólo en Internet!

MERCURY MAGNETICS FENDER 68...

¡BAJO PEDIDO! ENTREGA ESTIMADA DE 3 A 15 DÍAS (¡ALGUNOS MODELOS LOS TIENEN QUE FABRICAR BAJO PEDIDO!).

ToneClone transformers are exact genetic duplicates from these sought-after amps. Many came from amps owned by your favorite players. The same amps that were used to record some of the greatest electric guitar songs we’ve known.

Blackface Reverb and Brown Deluxe — #125C3A — 2″ Mounting Centers

Precio 190,99 €
  • ¡Disponible sólo en Internet!

Shopping Cart

Cart is empty

3

Buscar

You can try some popular tags here:

Account

No account?
Create one here
4