Contacto
91-7728996
Lunes a Jueves: 09:30-14:00 y 15:00-16:00 Viernes 09:30 a 15:00
LA MAYOR TIENDA DE REPUESTOS EN ESPAÑA PARA AMPLIFICADORES, BAJOS, GUITARRAS Y PEDALES DE EFECTOS
8 PIN TUBE VACUUM SOCKET...
Zócalo de 8 pines para válvulas tipo EL34, KT88, 6L6, 6V6, KT66, 6550... hecho de auténtica BAQUELITA para usos militares en la antigua Unión Soviética. Si quieres calidad y buen sonido este es tu zócalo. ¡No te la juegues!
1 METER 20 AWG VINTAGE...
SOVIET RUSSIAN 8 PIN VACUUM...
8-pin socket with metal clamp for amplifier chassis and solder lugs made in the former Soviet Union for military use.
MADE IN URSS
9 PIN TUBE SHIELD COVER...
Tubo de sujeción hecho de aluminio. Encaja a la perfección en válvulas 12AX7, 12AU7, 6N2P y similares.
Hecho en China
5,5 cm de largo por 2,50 cm de ancho.
2 FOOT - 64 CM DIAL DRIVER...
No stretch black cord made of nylon braid over a fiberglass core. Standard thin, 0.028 diameter. 2 foot or 64 centimeters.
New and unused.
GENUINE 9 PIN BELTON PC...
GENUINE 9 PIN BELTON TUBE...
2 METERS 20 AWG VINTAGE...
BELTON MICALEX 9 PIN TUBE...
Tubo de sujección hecho de aluminio más fino y de mejor calidad que los genéricos que hará que el calor de la válvula se disipe con más facilidad y gracias a ello trabajará mucho mejor. Encaja a la perfección en válvulas 12AX7, 12AU7, 6N2P y similares.
Hecho en Corea del Sur.
5,5 cm de largo por 2,50 cm de ancho.
GENUINE 9 PIN BELTON TUBE...
Phosphorus bronze terminal pins with solder plating for a superior electrical connection.
Glass fiber filled PPS (Micalex) insulating material to allow high voltage operation and protect against arcing.
8 PIN BELTON TUBE VACUUM...
1 METER 3.28FT BROWN...
1 Meter or 3.28 feet wire - Brown 18 Gauge Braided Power Cord for old radio. Cloth covered wire. 105º to 600V, New and unused.
BELTON 9 PIN MICALEX NOVAL...
8 PIN BELTON MICALEX TUBE...
2 METERS GOLD PARALLEL...
2 Meters or 6.56 feet wire - Gold 18 Gauge Braided Power Cord for old radio. Cloth covered wire. 105º to 600V, New and unused.
3 METERS 20 AWG VINTAGE...
GENUINE 8 PIN BELTON TUBE...
NEOHM POTENTIOMETER 100K...
Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.
Great for antique radios. 24mm body solid shaft length 1/4" diameter. 100K linear. Twist tab mount.
MADE IN ITALY.
NEOHM POTENTIOMETER 250K...
Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.
Great for antique radios. 24mm body solid shaft length 1/4" diameter. 250K linear. Twist tab mount.
MADE IN ITALY.
NEOHM POTENTIOMETER 200K...
Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.
Great for antique radios. 24mm body solid shaft length 1/4" diameter. 200K linear. Twist tab mount.
MADE IN ITALY.
NEOHM POTENTIOMETER 500K...
Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.
Great for antique radios. 24mm body solid shaft length 1/4" diameter. 500K linear. Twist tab mount.
MADE IN ITALY.
NEOHM POTENTIOMETER 2M MEG...
Composition element control designed for applications where bushingless controls are required. Phenolic shaft insures insulation if control is used on a hot chassis. Pot can be adjusted from the top by screwdriver (or knob on 1/4 knurled shaft) or from the bottom of the chassis.
Great for antique radios. 24mm body solid shaft length 1/4" diameter. 2 Meg linear. Twist tab mount.
MADE IN ITALY.
4 METERS 20 AWG VINTAGE...
ALPHA SPST SWITCH...
Potenciómetro-switch SPST de la marca Alpha ideal para su uso en radios antiguas. Dispone de seis pines para soldar, tuerca y dos arandelas.
2 amp
0.25W
125VAC
24mm Body
ALPHA SPST SWITCH...
Potenciómetro-switch SPST de la marca Alpha ideal para su uso en radios antiguas. Dispone de seis pines para soldar, tuerca y dos arandelas.
2 amp
0.25W
125VAC
24mm Body
5 METERS 20 AWG VINTAGE...
NEW EARPHONE FOR CRYSTAL...
New high impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug. MADE IN TAIWAN
Product Measurements by Type:
Bottom Diameter: 0.39 in.
Capacitance: 15,000 pf
Connector: 3.5 mm
Depth: 1.21 in.
Frequency Range: 200 Hz - 8,000 Hz
Impedance: 20 kΩ
Operating Temperature (TJ): -20°C to 60°C
Resistance: 20 MΩ
Sensitivity: 57 dB @1KHz
Top Diameter: 0.91 in.
Wire Length: 42 in.
DECALS ATWATER KENT -...
Water slide decal (not a sticker). The A.K. name comes in both solid gold and solid black colors, and the Stewart-Warner name is black with gold outline.
- ¡Disponible sólo en Internet!
6 METERS 20 AWG VINTAGE...
7 METERS 20 AWG VINTAGE...
8 METERS 20 AWG VINTAGE...
25Z6GT 25Z6 RECTIFIER...
New-Old-Stock (NOS) tube. The 25Z6GT is a heater-cathode type full-wave high-vacuum rectifier doubler tube designed for use in the power supply of a-c or a-c/d-c receivers. Eletrically the 25Z5, 25Z6, and 25Z6GT are identical. The brands we ship are from American manufacturers and may have the original box or an industrial box of current manufacture.
COIL RF FOR OLD RADIO OF...
Coil is similar to Miller number 70-RF.
Resistance Measurements Lug 1 to 2: 9.7 ohms
Lug 3 to 4: 78.0 ohms
Measurements made with BK Precision 875A LCR meter.
ANTENNA COIL FOR OLD RADIO...
Will replace broadcast band coils in any tube type radio. Adjustable inductance for perfect tracking. Mount on bus wire leads or in 5/16" hole. Coils are similar to Miller numbers that correspond. New and unused. With wiring diagram.
PHILIPS MINIWATT 12AU7 -...
Válvula de vacío Philips Miniwatt 12AU7 - ECC82. Se ha testado con un Microtracer y los resultados están en el apartado de las fotos. Se envían sin su caja original. (39)
COIL - OSCILLATOR FOR OLD...
Coil is similar to Miller number 70-OSC. New and unused. With wiring diagram.
CAPACITOR VARIABLE 365pf...
¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!
Single section 365 pf variable capacitor, also referred to as a tuning capacitor. Single section 365 pf variable capacitor. A compact, rugged, economical unit used in wide variety of low-voltage applications. This capacitor's almost cubical shape makes more efficient use of space and delivers a remarkable amount of capacitance for its volume.
1 " long frame
¼" dia. Shaft " long
Capacitance decreases with CW rotation.
Minimum capacitance per section: 14.9pF
Maximum capacitance per section: 384.2pF
Number of sections: 1
Air gap: 0.010 inches
Maximum voltage: 350Vrms
Note: The four solder lugs are a shared connection. The second connection is the metal frame.
Air Gap 0.010 in.
Capacitance, maximum 384.2 pF
Capacitance, minimum 14.9 pF
Depth 1.25 in.
Item Length 1.38 in.
Item Width 1.31 in.
Shaft Diameter 0.25 in.
Shaft Length 0.57 in.
Voltage Rating 350 Vrms
CAPACITOR VARIABLE 100pF...
¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!
This capacitor is used as a tuning capacitor in a variety of RF test equipment and ham radio gear. It's combination of low price, high maximum voltages, fairly large capacitances, and low-leakage L-4 grade ceramic have made it a popular configuration.
Single section 100pf, 1 3/16 long frame, ¼" diameter shaft, ⅞" long teflon shaft, ceramic base, screwdriver or knob adjustable, full rotation.
Minimum capacitance per section: 8.7pF
Maximum capacitance per section: 106.2pF
Number of sections: 1
Air gap: 0.032 inches
Maximum voltage: 1070Vrms
Depth 1.72 in.
Item Length 1.41 in.
Item Width 1.04 in.
Shaft Diameter 0.25 in.
Shaft Length 0.875 in.
Voltage Rating 1070 Vrms
Packaging Dimensions 3.5 in. × 3 in. × 1 in.
Weight (Packaging) 0.0992 lbs.
CAPACITOR VARIABLE 3x365pf...
¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!
Three section variable or tuning capacitor. Each section is 365pF. 3 ¼ long frame ¼" x 1" shaft. This capacitor is the largest condenser currently in production and can deliver a total capacitance of almost 1100 pF.
Minimum capacitance per section: 10.3pF
Maximum capacitance per section: 365.7pF
Number of sections: 3
Air gap: 0.0125 inches
Maximum voltage: 600Vrms
Depth 3.28 in.
Item Length 1.82 in.
Item Width 1.55 in.
Sections 3
Shaft Diameter 0.25 in.
Shaft Length 1.04 in.
Total Maximum Capacitance 1,097.1 pF
Voltage, maximum 600 Vrms
Packaging Information
Packaging Dimensions 4.3 in. × 1.8 in. × 1.6 in.
Weight (Packaging) 0.5027 lbs.