GENUINE FENDER BLACK KNOBS FOR JAZZ BASS - 0991370000

5 tuercas, 5 arandelas simples y 5 arandelas de presión originales de la marca Switchcraft para usar en varios modelos de sus jacks. Se pueden usar también en potenciómetros hechos en Estados Unidos o Canadá (CTS, Bourns, PEC..) debido a que son de métrica americana. Se envía 15 artículos tal y como salen en la foto.

These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.

Switchcraft 152B jack - Stereo end pin. 15/32" dia. 1/2" mounting hole. For acoustic and active electronics guitars. Turns on battery when plug is inserted. With nut, washer and the brand Switchcraft serigraphed . MADE IN USA

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Audio or log taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.

Cables monofilares de excelente calidad con recubrimiento de algodón de color 1 metro AMARILLO y 1 metro NEGRO tipo "Vintage" y de un solo conductor, para cablear cualquier marca de guitarra o bajo del mercado: Fender, Gibson, Ibanez, Jakson, Rickenbacker... Los cables también pueden ser usados para cablear un combo o una pantalla o para hacer el típico cable trenzado para amplificador antiguos.

Kit para bajos Fender modelo Jazz Bass y similares con la mayor calidad del mercado. Todos los componentes de este kit están fabricados en Estados Unidos con los mejores materiales para darle la mayor calidad, sonido, una vida útil muy larga y bajo en ruidos.

Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.

Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs

OAK 6 way switch for Fender Stratocaster.

PLEASE NOTE: While this switch uses the same mounting hole locations as a standard 5 way switch used on a USA Fender Stratocaster the switch slot will need to be lengthened equally on either end in order for the longer throw of the switch to engage the outer positions.

Condensadores de origen militar que se usaban para equipos militares de la antigua Unión Sovietica y que se redescubrieron como uno de los mejores condensadores para audio gracias a su buen acabado, sus especificaciones muy precisas y a sus propiedades cuando se usan en guitarras, bajos, amplificadores de marcas reconocidas.

The 2-pole switch can be used in a Varitone notch filter circuit, per Gibson ES-345 guitars. Hardware included. Made by Alpha.