¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Screw for for TAD Aluminum Chassis or Marshall© Chassis used in JMP, JCM800, JCM900 and others, M6x30

one piece, PU = 1

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Cage-nut for for TAD Aluminum Chassis z.B. K-ACM100WNH  or Marshall© Chassis used in JMP, JCM800, JCM900 and others, M6/SQ9,5

One piece!

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Black plastic amp corner  like used with the VOX AC30® and many more VOX® amps from 1966 to 2004 and Orange® amplifier models since the 1960's till today.

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

The corners are suitable for AC15C1 / AC30C2

These corners fit the current models of the AC15/AC30 'C series' / AC15C1_1X_H / AC30C2_2X_H models from year of manufacture/(start of the AC_C series) end of 2009/2010.

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Bridge rectifier, Vishay KBPC604, 400V, 6A, for Marshall JCM900, DSL2000. 

High performance bridge rectifier (upgrade !!!) as used in Marshall JCM900 (2100-SLX, 2500-SLX) and JCM2000 (TSL100, TSL60, DSL100, DSL401 etc)  for DC filament of the preamp tubes.

High current capacity of 6A, direct replacement.

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Amp swivel caster (for Fender)

Many of Fender's Pure Vintage accessories are handmade whenever possible on the same tooling and machinery as they were originally made. Whether you're customising, modifying or restoring, there's no better way to maintain the heritage and period-correctness of your Fender instrument or amp.

FEATURES

Set of four nickel-plated corners to protect amplifiers

Includes eight screws

Introduced in the era of Fender® blonde, brown, and black panel amps

For Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series.

Many of Fender's Pure Vintage accessories are handmade whenever possible on the same tooling and machinery as they were originally made. Whether you're customising, modifying or restoring, there's no better way to maintain the heritage and period-correctness of your Fender instrument or amp.

FEATURES

Set of four nickel-plated amp corners for effective protection

Includes 12 mounting screws

Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin®.

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Black amp handle VOX style, fits VOX® for AC30, AC15, AC50 and many other amps.

Includes authentic slotted screws and t-nuts for mounting.

new Super Quality: approved tested load capacity 40kg !!

Total length: 190mm

Mounting loop hole distance: 48mm

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Leather handle (Made from cowhide leather), raised w/loops, black, fits for AMPEG. 

These handles are made from aniline leather, giving them a natural leather color without any chemical additives on the surface.

Therefore, the color of each handle may vary slightly. 

length (flat): 22.5cm

mounting: 16,8cm

wide (max.): 2.8cm

Thickness: (max in middle of handle ca. 8mm)

Mountingcenter of brackets: 3.5cm

¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!

Made by Bulgin. Typically used by vintage Marshall®, Hiwatt® and VOX® amplifiers.

For large fuses 6.3 x 32mm or 6.3 x 25mm.

max. 13A @ 250V

Genuine Fender chrome amp to speaker cabinet mounting thumb screws for vintage piggyback style Showmaster, Bandmaster, Tremolux and Bassman amplifier. Pack of 2 items.