Contacto
91-7728996
Lunes a Jueves: 09:30-14:00 y 15:00-16:00 Viernes 09:30 a 15:00
LA MAYOR TIENDA DE REPUESTOS EN ESPAÑA PARA AMPLIFICADORES, BAJOS, GUITARRAS Y PEDALES DE EFECTOS
1x GENUINE DAVIES MOLDING...
Auténticos y genuinos botones fabricados por Davies Molding en los Estados Unidos. Este botón le brindará la calidad y el buen hacer de este fabricante que necesita en la reposición o en la construcción de pedales de efectos, amplificadores, radios y de otros proyectos si así lo necesita.
2x SMALL IVORY KNOBS FOR...
These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.
2x SMALL BLACK KNOBS FOR...
These knobs are just perfect for applications where you need very small knobs such as a floating pickguard with controls, or maybe even an old D'Armond pickup. Press fit for US 24 spline pots such as Bourns or CTS for example.
5X PACK BRASS ADAPTER...
Brass Sleeves (.250 OD X .238 ID X .375) - Convert Split Shaft Pot to Solid Shaft Potentiometer with American measures (CTS, Emerson Custom Guitar, Fender, Gibson, Bourns, PEC...). Pack 5 items.
5x ORIGINAL NUTS AND...
5 tuercas originales de la marca Switchcraft para usar en varios modelos de sus jacks. Se pueden usar también en potenciómetros hechos en Estados Unidos o Canadá (CTS, Bourns, PEC..) debido a que son de métrica americana aunque faltarían las arandelas de presión (Lockwasher).
CTS 1M A1M NYLON SHAFT...
¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!
Potenciómetro fabricado en Estados Unidos por CTS para su uso en la mayoria de marcas de amplificadores fabricados en Estados Unidos sobre todo en amplificadores Fender de la década de los 70. Su eje esta hecho de Nylon. Se incluye una arandela y una tuerca.
Medidas:
Longitud total - 26mm
Longitud del eje enroscable - 6mm
Longitud del eje en total - 16mm
Diámetro de la base - 23.5mm
CTS LINEAR 250K POT...
Potenciómetro fabricado por CTS en Estados Unidos ideal para tipo de bajos y guitarras del mercado (si tu guitarra es de fuera de Estados Unidos tendrás que limar el golpeador o la madera para que pueda encajar el eje ya que su diámetro es de métrica americana).
5x LOCKWASHER WASHERS NUTS...
5 tuercas, 5 arandelas simples y 5 arandelas de presión originales de la marca Switchcraft para usar en varios modelos de sus jacks. Se pueden usar también en potenciómetros hechos en Estados Unidos o Canadá (CTS, Bourns, PEC..) debido a que son de métrica americana. Se envía 15 artículos tal y como salen en la foto.
2x BLACK SPEED KNOB...
Set de dos botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x LEFT HAND BLACK SKIRTED...
Botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur y de uso exclusivo para zurdos (lefties). Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
Pack of 2 items.
2x BLACK SPEED KNOB KEITH...
Set de dos botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x LEFT HAND GOLD SKIRTED...
Botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur y de uso exclusivo para zurdos (lefties). Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
Pack of 2 items.
CTS LINEAR 250K POT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.
CTS LINEAR 100K POT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 100k solid shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.
CTS AUDIO LOGARITHMIC 100K...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 100k solid shaft pot. Audio or log taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.
CTS AUDIO LOGARITHMIC 1M...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1 Meg solid shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.
2X WHITE SILVER VOLUME &...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Estados Unidos. Estos botones sólo se pueden usar en aquellos potenciómetros de medidas americanas (¡métricos u orientales no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
CTS REVERSE AUDIO...
C50K solid shaft pot. Reverse audio taper. Solid shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment.
2X GOLD GOLD VOLUME & TONE...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Estados Unidos. Estos botones sólo se pueden usar en aquellos potenciómetros de medidas americanas (¡métricos u orientales no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2X BLACK GOLD VOLUME & TONE...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Estados Unidos. Estos botones sólo se pueden usar en aquellos potenciómetros de medidas americanas (¡métricos u orientales no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x AMBER SPEED KNOB FOR...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x GOLD SPEED KNOB FOR...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x LEFT HAND BLACK SPEED...
Botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur y de uso exclusivo para zurdos (lefties). Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x BLACK SPEED KNOB FOR...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x LEFT HAND GOLD SPEED...
Botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur y de uso exclusivo para zurdos (lefties). Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x CREAM IVORY SPEED KNOB...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x BLACK SKIRTED TOP HAT...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
CTS AUDIO LOGARITHMIC 500K...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k solid shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.
2x GOLD SKIRTED TOP HAT...
Botón no original para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
CTS POTENTIOMETER 500K...
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
CTS POTENTIOMETER 1M A1M...
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
FENDER ALUMINUM PICKGUARD...
This genuine Fender thin aluminum shielding requires no additional wiring. It fits on the underside of your Stratocaster pickguard and helps with noise-cancellation during play.
2x LEFT HAND BLACK SILVER...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricadas en Estados Unidos zurdas. Estos botones sólo se pueden usar en aquellos potenciómetros de medidas americanas (¡métricos u orientales no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
4x KLUSON KNOB POINTER...
Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in USA!
2x LEFT HAND GOLD GOLD...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricadas en Estados Unidos zurdas. Estos botones sólo se pueden usar en aquellos potenciómetros de medidas americanas (¡métricos u orientales no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x LEFT HAND BLACK GOLD...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricadas en Estados Unidos zurdas. Estos botones sólo se pueden usar en aquellos potenciómetros de medidas americanas (¡métricos u orientales no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
CTS POTENTIOMETER 250K...
CTS pots with a shorter ¼” bushing length that is perfect for pickguard mounted pots. These pots reduce the gap between the pickguard and bottom of the knob for a clean, near flush look. The shaft is a fine (24 tooth) knurl. Nut and lock washer are included.
CTS AUDIO LOGARITHMIC 250K...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shaft pot. Audio or log taper. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Solid shaft for push-fit knobs.
CTS TAD 450GT A1M 1M...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1 Meg solid shat shaft pot. Audio taper. This pot is ideal for instruments with single coils and humbuckers pickups.
GENUINE CTS BIAS LINEAR 10K...
Genuine Pot by CTS used in Vintage Style Fender Amps. 10k Linear with washer and nut and without original bag.
Fender part# 0017502000
CTS POTENTIOMETER 1M A1M...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1M split shaft pot. Audio taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
2x HARMONY SILVERTONE...
Set de dos botones reeditados de los antiguos que usaban las guitarras Harmony o Silvertone. Estos botones solo encajan perfectamente en potenciómetros de la marca CTS o de Emerson Custom Guitars con "Split Shaft" de modelos como 450GT, EPXXXX, mini, left hand o Push-Pull (las demás marcas o de medidas métricas se caen o se ajustan muy levemente al vástago)
CTS TAD 450GT 250K A250K...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K solid shat shaft pot. Audio taper. This pot is ideal for instruments with single coils pickups.
2x HARMONY SILVERTONE...
Set de dos botones reeditados de los antiguos que usaban las guitarras Harmony o Silvertone. Estos botones solo encajan perfectamente en potenciómetros de la marca CTS o de Emerson Custom Guitars con "Split Shaft" de modelos como 450GT, EPXXXX, mini, left hand o Push-Pull (las demás marcas o de medidas métricas se caen o se ajustan muy levemente al vástago)
4x KLUSON KNOB POINTER...
Vintage 90 degree blunt tip pointer washer made from steel to it's hardware line up. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs. Pack of 4 items without original bag. Made in USA!
2X BLACK SILVER VOLUME &...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Estados Unidos. Estos botones sólo se pueden usar en aquellos potenciómetros de medidas americanas (¡métricos u orientales no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
PREMIUM CTS LINEAR POT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.
250K CTS LONG SHAFT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.
CTS TAD 450GT 250K B250K...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k solid shat shaft pot. Linear taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment on a pickguard or control plate.
PREMIUM CTS POT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k long shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s.
250K CTS LONG SHAFT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250K long shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender and Gibson started using them in the early '60s. Split shaft for push-fit knobs.
CTS TAD 450GT A500K...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k solid shat shaft pot. Log or audio taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs. Each CTS pot includes a lock washer and one hex mounting nuts for custom height adjustment on a pickguard or control plate.
1x GENUINE DAVIES MOLDING...
Auténticos y genuinos botones fabricados por Davies Molding en los Estados Unidos. Este botón le brindará la calidad y el buen hacer de este fabricante que necesita en la reposición o en la construcción de pedales de efectos, amplificadores, radios y de otros proyectos si así lo necesita.
CTS TAD B25K 25K LINEAR...
Potentiometer for controlling the volume or tone of active pickups, or for use after the preamp of a piezo-saddle electric guitar bridge. Made by CTS in USA for TAD Tube Amp Doctor. Each CTS pot includes a lock washer and one hex mounting nuts.
Body Diameter: 24 mm
Power Rating ⅓ watt
Bushing Diameter: ⅜" (Threading: 3/8-32)
Bushing Length: ¼"
Shaft Diameter: ¼"
Shaft Length: ⅜"
Shaft Material: Aluminum - Solid Shaft
2x HARMONY - KAY - OLD...
Set de dos botones reeditados de los antiguos que usaban las guitarras Harmony, viejas KAY o en radios Philco. Estos botones solo encajan perfectamente en potenciómetros de la marca CTS o de Emerson Custom Guitars con "Split Shaft" de modelos como 450GT, EPXXXX, mini, left hand o Push-Pull (las demás marcas o de medidas métricas se caen o se ajustan muy levemente al vástago).
2x BLACK TALL SPEED KNOB...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
2x GOLD TALL SPEED KNOB...
Set de 2 botones no originales para guitarras Gibson, Epiphone u otras marcas fabricado en Corea del Sur. Este botón sólo se puede usar en aquellos potenciómetros de medidas americanas (¡métricos no!) de marcas como Bourns, CTS o PEAC entre otros fabricantes ("24 pin inch type for knurled shaft"). Excelente relación calidad - precio.
ORIGINAL FENDER...
Potenciómetro original de la marca Fender (part number 0021682049) fabricado por CTS. Este potenciómetro se usa para control de tono en los kits de modificación de Eric Clapton.
CTS 500K A500K LOGARITHMIC...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.
CTS 250K A250K LOGARITHMIC...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s.
CTS 500K B500K LINEAR...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
CTS 300K AUDIO POT...
Guitar volume and tone 300k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
CTS 250K B250K LINEAR...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
CTS POT POTENTIOMETER SHORT...
Guitar volume and tone 1Meg split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
GENUINE FENDER WHITE KNOBS...
Botones originales de la marca Fender para guitarras modelo Stratocaster. Path Number: 0992035000
CTS 250K A250K DPDT...
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!
PREMIUM CTS SPLIT SHAFT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 500k split shaft pot. Audio (log) taper. This pot is ideal for instruments with humbuckers and single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
GENUINE PREMIUM CTS MINI...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 250k split shaft pot. Audio (log) taper. This pot is ideal for instruments with single coils pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
GENUINE FENDER AGED WHITE...
Botones originales de la marca Fender para guitarras modelo Stratocaster. Path Number: 0991369000
SET RED KNOBS + TIP STYLE...
For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).
CTS A250K 250K METRIC M8 18...
CTS A250K Ohm true Vintage Audio Taper (30% Log) 24mm Guitar-Potentiometer.
Split / knurled shaft, 18 teeth or 6mm, medium 9.5mm bushing, M8.
Only for basses and guitars manufactured in Asia!
SET BLUE KNOBS + TIP STYLE...
For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).
SET GREEN KNOBS + TIP STYLE...
For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).
CTS B500K 500K METRIC M8 18...
CTS B500K Ohm true Vintage Linear Taper (30% Log) 24mm Guitar-Potentiometer.
Split / knurled shaft, 18 teeth or 6mm, medium 9.5mm bushing, M8.
Only for basses and guitars manufactured in Asia!
CTS 500K A500K DPDT...
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!
SET MINT GREEN KNOBS + TIP...
For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).
SET GOLD KNOBS + TIP STYLE...
For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).
SET VIOLET KNOBS + TIP...
For use on 24 spline potentiometers commonly found on USA made guitars (Imperial measures like Bourns, CTS, Fender...).
KNOB SET BLACK FOR MOST...
Replacement knob set for the most common concentric stacked potentiometers like Fender or Alpha Taiwan. Very High Quality made in South Korea.
CTS 500K A500K DPDT...
The best push-pull potentiometer ever made! These aren't your standard off the shelf CTS pots either. Mojotone had them custom made to their specification to have the smoothest taper possible and the tightest tolerance available!
CTS POT POTENTIOMETER SHORT...
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1Meg split shaft pot. Audio taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
GENUINE FENDER BLACK KNOBS...
Botones originales de la marca Fender para guitarras modelo Stratocaster. Path Number: 0991365000
CTS A500K 500K METRIC M8 18...
CTS A500K Ohm true Vintage Audio Taper (30% Log) 24mm Guitar-Potentiometer.
Split / knurled shaft, 18 teeth or 6mm, medium 9.5mm bushing, M8.
Only for basses and guitars manufactured in Asia!
CTS AUDIO 550K POT...
¡El mejor potenciómetro fabricado por CTS para guitarras ya esta aquí en España! Sus 550k de resistencia y con sólo 9% de tolerancia harán que nunca tenga un potenciómetro que baje de los 500k y que no suba de 599K. Además, supera por poco la calidad de la serie CTS 450 que vendemos en nuestra tienda online. Si buscas precisión y calidad para tu guitarra ¡compralos!
CTS AUDIO OVER 500K MINI...
¡El mejor potenciómetro fabricado por CTS para guitarras ya esta aquí en España!. Sus 500k de resistencia mínimos y con sólo 9% de tolerancia harán que nunca tenga un potenciómetro que baje de los 500k y que no suba de 550K.
FENDER POTENTIOMETER 100K...
Original Fender 100k linear taper mini potentiometer. 1/4" solid shaft with center detent. It is sent in its original bag.
GENUINE FENDER PARCHMENT...
Botones originales de la marca Fender para guitarras modelo Stratocaster. Path Number: 0056254049
CTS 250K REVERSE LOG AUDIO...
Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
CTS 500K REVERSE LOG AUDIO...
Guitar and bass volume and tone pot. Audio (REVERSE log) taper for LEFT HAND (SOUTHPAW). This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs
CTS DUAL 250K BLEND-BALANCE...
Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.
Measures:
3.7cm X 1.7 cm
CTS AUDIO 550K POT...
¡El mejor potenciómetro fabricado por CTS para guitarras ya esta aquí en España! Sus 550k de resistencia y con sólo 9% de tolerancia harán que nunca tengá un potenciómetro que baje de los 500k y que no suba de 599K. Además, supera por poco la calidad de la serie CTS 450 que vendemos en nuestra tienda online. Si buscas precisión y calidad para tu guitarra ¡compralos!
ORIGINAL FENDER CTS 50K...
Mini potenciómetro original de Fender 50K lineal (B50K) fabricado por CTS para guitarras American Vintage '62 Jazzmaster (Estados Unidos) y modelos Classic Player Series desde 1998 al presente (Mexico). 1/8" solid shaft. 5/16" diameter bushing.
GENUINE FENDER...
Potenciómetro original de Fender fabricado por CTS para diversos modelos de bajos y guitarras antiguos o NOS: 55 and 59 NOS CS Precision Bass, Antigua Strat, Blue Flower Strat, Paisley Strat, 69 Strat NOS CS, Stu Hamm Urge II Bass, American Deluxe Jazz Bass y American Deluxe Precision Bass, No se incluyen arandela ni tuerca. Se envía en su bolsa original.
CTS 1M LINEAR POT...
¡PRODUCTO BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!
Guitar volume and tone pot - the top-of-the-range 450 series CTS Premium 1M split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
GENUINE FENDER BLACK KNOBS...
Botones originales de la marca Fender para sus modelos Jaguar, Mustang y bajo eléctrico Mustang. Path Number: 0019455049
CTS 300K LINEAR POT...
¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 7 A 31 DÍAS LABORALES!
Guitar volume and tone pot CTS Premium 300k split shaft pot. Linear taper. This pot is ideal for instruments with humbuckers pickups. CTS pots have been used in countless electric guitars since Fender started using them in the early '60s. Split shaft for push-fit knobs.
CTS DUAL 500K BLEND-BALANCE...
¡BAJO PEDIDO! ¡ENTREGA ESTIMADA DE 5 A 31 DÍAS LABORALES!
Potentiometer by CTS (USA) for controlling one pickup or source to another, with both signals full at the center detent. Linear Taper with split shaft.
Measures:
3.7cm X 1.7 cm
FENDER 250K/500K STACKED...
Two potentiometers in one for you Fender Jazz Bass reissue o Telecaster designed by CTS! Stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole!. ATTENTION! the top / volume section is 500K and the bottom / tone section is 250K
3/8" mounting hole. Top shaft is 3/16"(4.75mm) diameter and bottom shaft is 17/64"(6.75mm) diameter.